Axis Consultants

Call Directions Website Contact the business

Axis Consultants F-8, Race Course, Near Central Bank, Dehra Dun, Uttarakhand - 248001
MDH 4/40, Sector H, Jankipuram, Lucknow, Uttar Pradesh - 226021

Consultants for Pollution Control Board, Central Ground Water Board, Fire, Environment Clearance, Industrial Development, MSME Subsidy, Rainwater Harvesting, Groundwater Recharge, Plastic Waste, Shop/Factory, Labour Law, Single Window NOC in UP & UK

30/09/2026

Your waste may reach the recycler. But what if the numbers don’t? ⚠️

C&D waste compliance doesn’t end when the waste moves from one point to another.

The producer, intermediate waste storage facility and recycler each have a role in the reporting chain. Their data needs to tell the same story. 📋

If the reported quantities don’t match, the figure considered for the producer’s EPR target fulfilment can be affected.

That’s why maintaining proper waste movement records, quantity records and supporting documentation is just as important as the physical handling of the waste.

In compliance, the waste trail and the data trail need to stay aligned. 📌

Want to know what data you need to maintain for C&D EPR compliance?

Comment “DATA” and connect with us today. 💬

Construction and demolition waste, C&D waste, C&D Waste Management Rules 2025, C&D waste rules India, EPR for C&D waste, C&D waste EPR registration, CPCB C&D waste portal, MoEFCC notification 2025, C&D waste compliance, bulk waste generator, construction waste management, demolition waste management, construction debris, debris management, concrete waste recycling, C&D waste recycling plant, recycled aggregates, recycled concrete aggregate, manufactured sand, recycled bricks, paver blocks from C&D waste, recycled C&D waste products, mandatory use of recycled materials, EPR certificates, EPR targets, builders and developers compliance, real estate compliance, infrastructure projects, green building materials, sustainable construction, circular economy in construction, zero waste construction site, source segregation, illegal dumping of debris, environmental compensation, dust control at construction sites, construction air pollution, urban local body, C&D waste management plan, SPCB compliance, CPCB guidelines, NGT, landfill diversion, reducing sand mining, low carbon construction, ESG in real estate, EPR consultant India, environmental compliance consultant, waste to resource, sustainable cities.

23/09/2026

⚠️Building the project first and planning waste management later? That can be too late. ⚠️

The Solid Waste Management Rules, 2026 place certain responsibilities on the planning and construction side of a project.

For example, for new Bulk Waste Generators, Rule 6(d) requires adequate-capacity wet-waste processing arrangements.

The Rules also address solid waste generated during construction of new construction units.

That means waste management shouldn’t be treated as a finishing touch after the building is complete.

Space. Capacity. Processing arrangements.
These can need consideration while the project is still being planned. 📐

Environmental compliance isn’t something you simply add at the end.

If your project is in the planning or construction stage, comment “PLAN” and connect with Axis Consultants today

17/09/2026

Got your authorization? That doesn’t mean compliance is over. ⚠️

For a waste-processing facility, authorization is an important requirement, but the operator’s responsibilities continue after authorization.

The Solid Waste Management Rules, 2026 require the facility to operate according to prescribed standards and applicable guidelines in a safe and environmentally sound manner.

And if the required responsibilities under the Rules are not complied with, Environmental Compensation may be levied, with the concerned State Pollution Control Board or Pollution Control Committee having the relevant role under Rule 17. ⚖️

So remember:
Authorization gives you the basis to operate.

Ongoing compliance keeps that operation compliant.

📋 Want to understand what continues after authorization? Comment “APPROVAL” and connect with Axis Consultants

14/09/2026

You handed over the waste. But did you hand over the legal responsibility? ⚠♻
This is where many organisations may overlook an important part of waste compliance.
Simply handing waste to a collector does not automatically make the compliance trail
disappear.
Ask yourself:
🔎 Are you legally authorised to handle this specific waste category?
🚛 Is the entire transport chain compliant?
📍 What is the exact documented final destination?
📄 Can you prove the handover and its final disposal or processing?
Because if waste is handed over to an unauthorised collector or ultimately dumped illegally,
the organisation that generated the waste may still face serious compliance consequences.
That means waste management isn’t simply:
Generate → Hand over → Done.
It’s about having a compliant, traceable chain from generation to final destination.
🔗
Don’t just ask,
Ask,
“Who collected our waste?”
“Can we prove where it went?”
If you want to assess whether your waste-handling trail is actually compliance-ready, comment
“TRACE” and connect with Axis Consultants.

🔑 Keywords
waste handover, waste compliance, legal liability, waste collector, authorised waste collector,
waste transport, waste traceability, final destination, waste disposal, waste documentation,
environmental compliance, SWM Rules 2026, compliance records, regulatory compliance





09/09/2026

Same amount of waste. Does that mean the same compliance? Not necessarily. ♻️
Two commercial establishments can generate the same quantity of solid waste, but their waste composition, applicable requirements and management approach can be different.
Under the Solid Waste Management Rules, 2026, waste has to be segregated at source into different streams, including wet, dry, sanitary and special-care waste.
So, looking only at how much waste your organisation generates is not enough. ⚠️
The first compliance question is:
What requirements actually apply to your organisation?
That is where environmental compliance moves from a generic checklist to a business-specific responsibility.
🔎 Want to decode what applies to your business? Comment “DECODE” and connect with Axis Consultants

Environmental compliance
SWM Rules 2026
Solid Waste Management
Waste management
Waste segregation
Waste composition
Compliance requirements





25/08/2026

Onam celebrates abundance. Don’t let it leave behind an abundance of waste.

Prosperity means little if it costs the planet that gives it to us.

This Thiruvonam, choose:
→ Segregation at source (wet/dry)
→ Zero single-use plastics
→ Recyclables to authorized recyclers only
→ Eco-friendly decor over disposables

And a reminder for businesses celebrating big this season: EPR and SWM compliance obligations don’t pause for festivals. If your waste management framework needs a compliance check, talk to us.

Happy Onam, from Axis Consultants.


🚧 Attention builders and contractors in India.The Construction & Demolition Waste Rules, 2025 have been in effect since ...
04/08/2026

🚧 Attention builders and contractors in India.

The Construction & Demolition Waste Rules, 2025 have been in effect since 1st April 2026 — compliance can no longer be delayed.

Before you begin your next project, ask yourself these 5 questions.

If you paused on even one of these, your project may not be fully compliant.
Regulations are already active. Don't let your project get caught in non-compliance when it should be moving forward.

Let's get you audit-ready.
👉Drop a comment or DM us and we'll walk you through it.

Reach out to us:
📞 +91 8960080401 | +91 6390345454
🌐 www.axiscg.in | 📩 [email protected]

🗑️ Ever wondered what actually happens to your waste after the truck picks it up?Spoiler: it's not magic; it's a system....
03/08/2026

🗑️ Ever wondered what actually happens to your waste after the truck picks it up?

Spoiler: it's not magic; it's a system. ✨
Look through our 5-Step Solid Waste Management Framework — from your bin to safe disposal 🔄

Because sustainability isn't a buzzword — it's a process. ♻️
📍 An efficient framework today = a sustainable future every day.

Need help navigating SWM compliance for your business? That's literally what we do. 👇
📩 Drop us a DM or reach out at [email protected]
🌐 www.axiscg.co.in

31/07/2026

🌿 **Glimpses from our participation in the State-Level Consultative Workshop on the Implementation & Enforcement of the Single-Use Plastic (SUP) Ban.**

We are proud to share that **Mr. Aman Bhatia** represented **Axis Consultants** as a keynote speaker at the State-Level Consultative Workshop organized by the **Uttarakhand Pollution Control Board (UKPCB)** on the occasion of **Global Tiger Day**. 🐅

🎤 During the technical session, he delivered an insightful talk on:
**"Achieving Circular Economy in Plastic Waste Management through Extended Producer Responsibility (EPR)"** ♻️

🤝 The workshop brought together policymakers, industry leaders, and environmental experts to discuss the effective implementation and enforcement of the Single-Use Plastic Ban while exploring practical solutions for sustainable plastic waste management.

🙏 We thank **UKPCB** for providing a valuable platform for knowledge sharing, collaboration, and meaningful dialogue toward a cleaner and more sustainable future. 🌍

📩 Looking for expert guidance on **EPR Compliance, Plastic Waste Management, or Environmental Regulations?** Connect with **Axis Consultants**.

♻️ 🌍 🔄 ♻️ ✅

Address

Dehra Dun
248001

Opening Hours

Monday 11am - 7pm
Tuesday 11am - 7pm
Wednesday 11am - 7pm
Thursday 11am - 7pm
Friday 11am - 7pm
Saturday 11am - 2pm

Telephone

+916390345454

Website

Alerts

Be the first to know and let us send you an email when Axis Consultants posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Axis Consultants:

Shortcuts

Share

Category