Computer repairing & assembling

Computer repairing & assembling all types of PC assembling & repairing done here, besides this deals with all types of network issue.

21/07/2013

changing Administrator password without entering the administrator account

12/07/2013

Step by Step Assembling Computer

Know your computer properly
12/07/2013

Know your computer properly

01/07/2013

It means, keyboard error at boot. there is no display issue. if u want 2 solve this then follow the steps...

Cause

An error with the keyboard can be caused by any of the below possibilities.

Keyboard is not connected properly.
Stuck key
Bad keyboard
Bad PS/2 or AT port
Solution

Keyboard is not connected properly

Verify that the keyboard is connected properly to the computer by turning off your computer and then disconnecting and reconnecting the keyboard to the computer.

Stuck key

Ensure that there are no stuck keys on the keyboard. If all keys appear to be ok and you have a standard desktop computer with keyboard, turn the keyboard over and gently hit the back of the keyboard to loosen any dirt or hair that may be stuck in the keyboard.

Bad keyboard

Try another keyboard on the computer to verify that the keyboard has not gone bad.

Bad PS/2 or AT port

If all of the above solutions are not able to resolve your issue it is likely that the port on the back of the computer may be bad and the motherboard or I/O board may need to be replaced.

01/07/2013
01/07/2013

You can ask any questions which are computer related, I will always try to solve your problem by best of my knowledge...

By Admin
Ranindra Roy..

01/07/2013

How to repair VGA input with no signal?

Before i started to cleaned up the system unit i logged off first the PC and then the UPS. I using vacuum to clean and removed the dust inside the system unit. I disconnect first the SATA 3 connection to hardisk drive and the power supply as well. When i am about to finished to clean up the system unit i reconnect the SATA 3 into hardisk drive and the power supply. Then i begun to turn on the PC but unfortunately there was no signal and its going to sleep and the green LED become red and it beep 5 times.

01/07/2013

How to repair VGA problem???

Okay the 5 beeps is your computer telling you that there is something wrong with it somewhere.
If you can access the internet go to your computer manufacturers web site and look for information about error beeps.
If you have no luck there then you will need to go to the motherboards web site and try and find what the beep codes mean
These beeps you are hearing are built into the BIOS and are there to tell you where to start looking when you have problems with your computer
Good luck

AOC, Samsung, Applle, LG, and many more latest LED monitor
04/06/2013

AOC, Samsung, Applle, LG, and many more latest LED monitor

ASUS, MSI, INTEL Latest MotherBoards
04/06/2013

ASUS, MSI, INTEL Latest MotherBoards

These are the parts of computer i deal with........
02/06/2012

These are the parts of computer i deal with........

Address

Kolkata
700063

Telephone

9836313103

Website

Alerts

Be the first to know and let us send you an email when Computer repairing & assembling posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share