https://wa.me/message/KOIJTZKTOTC4F1

Soman Company, Janta Nager , Kandivali East, Mumbai (2026)

24/02/2023

Symptom: Blue screen. No sound, no picture and no OSD.
Cure/Solutions: Replace circuit protector fuse on T-CON board.

24/02/2023

6 TIMES BLINKS
6X Blink - Backlight System Failure
NOTE: All models will make two attempts to power up before a 6X is activated. The SONY logo
(Backlight) may or may not display on the screen. However, the splash tones will be heard two times.
After the second attempt the TV will turn off and the standby LED will blink a 6X protection mode.
(Note: The splash tone may not be heard if it is turned off or the volume is set to minimum.) If a 6X
blink pattern is activated then a defect has occurred in one of the following areas.
Defective Panel LED(s)
Defective Power Supply
When troubleshooting a 6X backlight system failure it is key to notice if the backlights illuminate
before the TV shuts off. The following list shows the possible backlight status and blink pattern and
the possible failed components.
* Momentary Backlight and 6X [Defective LED(s) (LCD Panel Assb.)]
* No Backlight and 6X [Replace Power Supply]
In most cases, if the Sony logo (Backlight) momentarily illuminates and the TV shuts off and a 6X is
activated than one or more of the backlight LEDs are defective. The LCD Panel assembly panel must
be replaced for a defective LED. However, before replacing the LCD panel assembly check for a
complete loss of the Negative Backlight (-89V to -125V) power supply. The -89V to -125V power
supply can be checked at CN6702/pins 1 & 3.
If there is no backlight before the TV shuts off and activates a 6X, than check the “Backlight ON”
signal from the TV microprocessor and the Positive (+145V) Backlight power supply from the Power
Supply Board. The BL-ON signal can be checked at CN6704/pin 5 and the +145V at CN6701/pins 1 &
3. If the “Backlight-ON” signal is okay and the Positive Power supply is missing then the Power
Supply Board is defective. However, if the Backlight-ON is missing then the X-Reality Microprocessor
is defective and the Main Board must be replaced to repair the problem.

24/02/2023

5 TIMES BLINKS
5X Blink - T-CON Error
The 5X blink protection mode indicates a communications error between the T-CON Board and the
X-Reality microprocessor on the Main Board. If the T-CON is available for replacement, replace the T- CON. [If the T-CON is not available, the LCD panel must be replaced since the T-CON circuit is part of
the LCD panel assembly.] In rare cases a loose or defective LVDS cable could also be the cause

23/02/2023

We are excited to offer our new installation service for USB-powered LED strip backlights for your flat screen TV. Our LED strips come with 20 color options, so you can create the perfect ambiance to enhance your viewing experience.

Our team of skilled professionals will carefully install the LED strip to the back of your TV, ensuring a seamless and tidy installation. We only use high-quality products and take pride in our workmanship, ensuring that you will be satisfied with the final result.

With a USB-powered LED strip backlight, you can transform your TV viewing experience and create a stylish and modern atmosphere in your living room or bedroom. The soft glow of the LED strip provides a relaxing and inviting ambiance, perfect for movie nights or unwinding after a long day.

Our installation service is competitively priced, making it affordable for you to upgrade your TV setup. Contact us today to schedule your installation appointment and take the first step in enhancing your home entertainment experience.

21/02/2023

Tv installation with dimensions views
Installing a TV involves several dimensions that need to be considered. Here are some of the most important dimensions to keep in mind:

Screen size: This refers to the diagonal measurement of the screen in inches. It is important to choose a screen size that is appropriate for the room where the TV will be installed. A screen that is too small may be difficult to see from a distance, while a screen that is too large may overwhelm the room.

Viewing distance: This refers to the distance between the viewer and the screen. The ideal viewing distance will depend on the size of the screen and the resolution of the TV. As a general rule, the viewer should be seated at a distance that is roughly 1.5 to 2.5 times the diagonal screen size of the TV.

Wall space: The TV will need to be mounted on a wall, so it is important to measure the available wall space to ensure that the TV will fit. Additionally, it is important to consider the height at which the TV will be mounted, as this will affect the viewing angle.

Power and cable connections: The TV will need to be connected to a power source and to any cable or satellite boxes, streaming devices, or gaming consoles. It is important to ensure that there are adequate power outlets and cable connections in the vicinity of the TV installation.

Room lighting: The lighting in the room where the TV will be installed can affect the viewing experience. It is important to consider the position of windows and lighting fixtures, and to choose a TV with appropriate brightness and contrast settings.

By considering these dimensions, you can choose a TV and a location for installation that will provide the best possible viewing experience.

21/02/2023

Multi-channel surround sound systems are designed to provide an immersive audio experience by placing speakers around a listening area to create a three-dimensional sound environment. These systems typically include a center channel speaker for dialogue, left and right front speakers for music and sound effects, left and right surround speakers for ambient sounds, and a subwoofer for deep bass frequencies.

To install a multi-channel surround sound system, you will need to follow a few basic steps:

Choose your speakers: Select speakers that are compatible with your audio equipment and that fit within your budget. You may also need to consider the size of your room and the number of speakers you will need.

Set up your audio equipment: Connect your audio equipment to your television or media player, and configure the audio settings for your system.

Position your speakers: Place your speakers in their designated locations, following the manufacturer's instructions. This usually involves positioning the front left and right speakers at ear level and placing the center channel speaker above or below your TV. The surround speakers are typically placed behind or to the side of the listening area, and the subwoofer can be placed anywhere in the room, as bass frequencies are not directional.

Calibrate your system: Most audio systems come with a calibration tool that can help you adjust the volume levels and timing of each speaker to create a balanced audio environment. Follow the instructions for your specific system to calibrate your speakers.

Once you have installed your multi-channel surround sound system, you can enjoy a more immersive audio experience while watching movies, playing games, or listening to music. It is important to note that not all media is recorded in surround sound, so some content may not utilize all of your speakers. However, when you do find content that is recorded in surround sound, the experience can be truly transformative.

21/02/2023

If you're looking for TV wall mounting services, you can search for local companies or professionals who specialize in this area. Many home theater installation companies, handymen, and electricians offer TV wall mounting services.

To find a reputable professional in your area, you can search online directories, such as Yelp or Angie's List, or use search engines to look for TV wall mounting services near you. Be sure to read reviews and check the credentials of any potential service providers to ensure they have the necessary experience and equipment to properly mount your TV.

When choosing a service provider, it's important to consider factors such as their pricing, availability, and customer service. You may also want to ask for references or examples of their previous work to ensure they have a track record of successfully mounting TVs and concealing cables.

Overall, hiring a professional to mount your TV can save you time and ensure that the job is done correctly, so it's worth investing in a reliable and experienced service provider.

20/02/2023

Microwave ovens are a convenient and efficient way to cook or reheat food. However, like any other appliance, they can experience problems. Here are some common microwave oven problems and their fixes:

Microwave oven not working: If your microwave oven is not working, check if it's properly plugged in and the outlet is working. If the outlet is working, try unplugging the microwave and plugging it back in after a few minutes. This may reset the microwave and solve the problem. If the problem persists, it could be a faulty fuse or a problem with the door switch. In such cases, it's best to call a professional.

Microwave runs but doesn't heat: If your microwave is running but not heating, the problem could be a faulty magnetron, high voltage diode, or capacitor. These components are responsible for generating heat in the microwave. If any of these components are faulty, the microwave will run but not heat. In such cases, it's best to call a professional.

Sparks inside the microwave: Sparks inside the microwave could be caused by a number of things, such as metal objects, aluminum foil, or dishes with metallic paint. Remove any metal objects or dishes and try again. If the problem persists, there could be a problem with the waveguide cover or the magnetron. In such cases, it's best to call a professional.

Microwave makes strange noises: If your microwave is making strange noises, it could be a problem with the turntable or the drive motor. The turntable should be properly seated on the spindle, and the drive motor should be working properly. If the problem persists, it could be a problem with the fan or the magnetron. In such cases, it's best to call a professional.

Microwave door not closing properly: If your microwave door is not closing properly, it could be a problem with the door switch or the latch. The door switch should be properly aligned, and the latch should be working properly. If the problem persists, it could be a problem with the hinges or the door seal. In such cases, it's best to call a professional.

Remember, microwave ovens use high voltage and can be dangerous to work on without the proper knowledge and tools. ..

20/02/2023

Checking a magnetron with a neon bulb can be a simple way to determine whether the magnetron is functioning or not. Here are the steps to follow:

Turn off the power supply to the microwave oven and unplug it from the electrical outlet.

Remove the outer cover of the microwave oven to expose the magnetron. The magnetron is a cylindrical component located near the center of the oven.

Find the wire that runs from the magnetron to the high voltage diode. This wire is usually a thick, red cable.

Disconnect the wire from the high voltage diode and attach it to one end of the neon bulb. Attach the other end of the bulb to the metal chassis of the microwave oven.

Plug the microwave oven back into the electrical outlet and turn it on. If the neon bulb glows brightly, it means that the magnetron is functioning properly. If the bulb does not light up or only glows dimly, it may indicate a problem with the magnetron.

Turn off the power supply to the microwave oven and unplug it from the electrical outlet. Reconnect the wire to the high voltage diode and reassemble the outer cover of the microwave oven.

Note that working with high voltage components can be dangerous and should only be done by qualified technicians. If you are not familiar with electrical work, it is best to leave this task to a professional

18/02/2023

Many modern televisions are equipped with LED lights that flash to indicate various errors or issues with the TV. These blinking lights are often referred to as error codes and can help you diagnose and troubleshoot problems with your TV.

Unfortunately, the specific error codes and their meanings can vary depending on the make and model of your television. To find the error code information for your specific TV, you will need to refer to the user manual or contact the manufacturer's customer support.

18/02/2023

you're having trouble installing the Android TV Data Saver. Here are some general steps you can try:

Make sure that your Android TV device is connected to the internet.
Go to the Google Play Store on your Android TV.
Search for "Android TV Data Saver" in the search bar.
Select the app and click "Install".
Follow the prompts to complete the installation process.
If you are still unable to install the app, you can try these additional troubleshooting steps:

Restart your Android TV device.
Clear the cache and data of the Google Play Store app.
Check if there are any updates available for your Android TV device and install them if necessary.
Try installing the app from a different internet connection or a different device.
Contact the app developer or the manufacturer of your Android TV device for further assistance.
I hope this helps you to install the Android TV Data Saver. If you have any further questions or issues, please feel free to ask.

18/02/2023

If you are experiencing a "playback error" while using YouTube TV, there are several steps you can take to try to fix the issue:

Check your internet connection: Make sure you have a stable internet connection and that your device is connected to the internet. You can try restarting your router or modem to see if that helps.

Close and reopen the YouTube TV app: Sometimes simply closing and reopening the app can help to resolve playback errors.

Clear the app cache and data: If the problem persists, try clearing the cache and data for the YouTube TV app. This will reset the app to its default settings and may fix any issues that are causing playback errors.

Update the app: Make sure you have the latest version of the YouTube TV app installed. You can check for updates in the Google Play Store or the App Store.

Restart your device: If none of the above steps work, try restarting your device to see if that resolves the issue.

If the problem still persists please Messages

Soman Company

24/02/2023

24/02/2023

24/02/2023

23/02/2023

21/02/2023

21/02/2023

21/02/2023

20/02/2023

20/02/2023

18/02/2023

18/02/2023

18/02/2023

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category