Rajyog Fire Services Pvt.Ltd.

Rajyog Fire Services Pvt.Ltd. Fire Hydrant Protection System is designed to fight fire of huge proportions, in all classes of risks.

23/07/2024
08/05/2021

Sprinkler Insulation Final Testing

https://youtu.be/r9n2cb6M-AsHospital engineering service provision for Fire Protection according to NABH1. Fire fighting...
28/01/2020

https://youtu.be/r9n2cb6M-As

Hospital engineering service provision for Fire Protection according to NABH

1. Fire fighting installation approval must be obtained
2. Location of control room should be easily accessible.
3. Control panel & manned, PA equipment should be connected with detection system or fire alarm system.
4. Pumps and pump room
5. 2 separate pumps i. e .Electric and diesel pump should be available
6. Provision of Forced ventilation should be there.
7. Arrangement of filling Fire tenders
8. 4 way fire inlet must be present in case of emergency
9. Proper access for Fire tender to fire tanks
10. Fire Drill should be performed
11. Yard Hydrants should be available
12. Ring main and yard hydrants should be as per strategic locations.
13. 2 way fire heads to charge the ring main
14. Landing Hydrant & Hose reels
15. Wet riser system must be installed
16. First aid Fire fighting appliances must be in working conditions
17. First aid equipment cabinets
18. Provision of Escape routes - escape stair
19. Sprinklers system - basement & bldg. above 15 M in height
20. Automatic Smoke detectors / heat detectors
21. Provision of Fire Alarm System & Fire extinguishers

General Recommendations:
1. Hospitals of high rise buildings are found to be utilising the cellars for generators and transformers, which is strictly prohibited.
2. Canteens, OP blocks, dormitories and pathological labs are not allowed in cellars.
3. Regular refresher training courses for the fire brigade personnel.
4. Recommendation for creating Rural Fire Services in areas which are not at present under any full time Fire Service cover.
5. Augmentation of Municipal Hydrant System.
6. Adoption of best practices from other city codes like Mumbai Delhi and Hyderabad by State Government for fire safety.
7. Clarifying position of CFO and Fire Protection Consultant in approval procedures.
8. Recommendation for establishment of Disaster Control Room for cities.
9. A passing reference to NBC rules like provision of fire doors, fire separating walls, fire exit & fire lifts should not be overlooked.

Fire safety Measures have 4 Parameters namely means of access through approach roads, open spaces, means of escapes like external Staircases & Fire fighting equipment. Thus provision of all these is necessary from safety point of view within hospital premises. An effective fire program calls for an understanding of the hospital fire plan & the active participation of every employee at all times. Also at least 1 well trained fire officer should be elected at every hospital. There is no better protection against fire than constant vigil to detect fire hazards, prompt action to eliminate in safe conditions & a high degree of preparedness to fight fire.

Everyone should remember that every big fire starts from small one therefore nothing should be considered insignificant within hospital premises. Some hospitals lack trained staff to handle such emergencies therefore frequent mock as well as evacuation drills must be taken. Panic & confusion are the greatest hazards of fire & they can be countered only by sufficient preparedness which should be avoided by means of hospital staff in case of fire emergency. Strong actions like putting board of ‘Fire Unsafe Building' in front of hospitals, which did not initiate fire safety measures like Fire Department (Hyderabad) should be implemented in other cities & states. The best form of protection from fire is its prevention.

Hospital engineering service provision for Fire Protection according to NABH 1. Fire fighting installation approval must be obtained 2. Location of control r...

26/01/2020
Happy Independence Day
15/08/2019

Happy Independence Day

SO HOW DOES IT WORK?Firetrace electrical fire suppression systems use the patented detection tubing which is installed t...
01/04/2019

SO HOW DOES IT WORK?
Firetrace electrical fire suppression systems use the patented detection tubing which is installed throughout the enclosure and connected to the cylinder valve. The tubing is then charged with nitrogen and this pressure is utilised to hold back the extinguishant in the cylinder.
Should a high temperature or fire occur then the pressurised tubing will burst and the extinguishant will be deployed directly from the burst hole onto the fire.
This effectively means the fire has formed the discharge nozzle so it is always exactly in the right location.
A switch is also added to the system and is held closed by the pressure. Should the tubing burst or the pressure be lost for any reason then the switch will open and this signal can be used to isolate the power and raise an alarm.

KEY FEATURES OF FIRETRACE
When choosing suppression systems to safeguard technical equipment, effectiveness and affordability both need to be borne in mind.
In terms of effectiveness, Firetrace® offers state-of-the-art protection. Our manufacturing process meets the ISO 9001:2015 standard, while recognition from leading insurance companies is another testament to our quality.
As well as sounding the alarm swiftly, our systems immediately spring into action to tackle any outbreak of fire. In the case of an older style detector attached to the ceiling, sensors only react to the smoke once it has started to spread from the original fire site. Our systems enable a faster response, minimising damage and disruption to your operations.
Testimonials from satisfied customers bear this out, telling how our equipment speedily found an electrical fire in their workplaces and put it out at source, with either no damage or very little.
At the same time as being highly effective, Firetrace® systems are designed to be affordable, avoiding the expense of complex electronic solutions. Also, where the need is to protect equipment which is already in use, retrofitting can be carried out simply, helping to keep down your costs.
In addition to being highly experienced manufacturers of suppression systems, we are expert designers and installers and offer full after-sales care

Rajyog Fire Services Pvt.Ltd.

Yogesh Asher
(M) +919821214434

(E) [email protected]

Fire Brigade  Inlet BreechingsThe water feed from the Fire Service pump is routed to the Riser system by means of an inl...
25/02/2019

Fire Brigade Inlet Breechings

The water feed from the Fire Service pump is routed to the Riser system by means of an inlet breeching which is installed at Fire Brigade level on the outside of a building.

Ideally the inlet breeching should be positioned as close as possible to the rising main in order to minimize pressure loss- a common problem when dealing with High Rise buildings.

It should be in an easily accessed location such as along a service road large enough for vehicular access and away from fallen debris or hazardous obstructions.

Rajyog Fire Services Pvt.Ltd
Yogesh Asher
9821214434

11/02/2019

Fire Strobes Deaf in Smoke Detectors and Fire Safety

Smoke alarms save lives. But those who are deaf or hard-of-hearing cannot depend on the sound of the regular alarm to alert them to a fire. ... The alarms for sleeping areas with strobe lights are required to be of a special high intensity that can wake a sleeping person.

Hi,friends .help me for Subscribers🔔. Thank you.

https://www.youtube.com/channel/UCgfvvKqdaCWPqF5SKxfZC0Q

https://youtu.be/OgT_FDz0ulcFEATURESSELF ACTIVATINGThe Fire Extinguisher Ball works automatically when in contact with f...
07/02/2019

https://youtu.be/OgT_FDz0ulc

FEATURES

SELF ACTIVATING
The Fire Extinguisher Ball works automatically when in contact with fire.
Install within 30cms over any fire hazard.

ALARM
When the ball explodes, the built-in alarm goes off releasing an approximately 138-decibel noise.

LIGHTWEIGHT
Weighing at 1.3 Kg Approx, it is suitable for anyone, Women, Children and Elderly people.

EASY TO USE
No training required. Just throw the ball with one hand into the fire.

SAFE
No need to get close to the fire.
The ball will not self-ignite when shaken or damaged.
The outward driving force from activation of the ball does not harm human or environment.
Non-toxic to the environment. Fire Extinguisher Ball is made from human and environmentally friendly materials.

FAST AND EFFECTIVE
It activates within 5-10 seconds after contacting the fire.
When used together with two or more balls, it can suppress a large fire.

TECHNICAL
SPECIFICATIONS
FIRE EXTINGUISHING BALL
Dimension : Sphere, Diameter 15cm

Gross Weight : 1.30 Kg Approx

Chemical Weight : 1.25 kg

Fire Extinguishing Agent : Non-Toxic Mono Ammonium Phosphate

FIRE TYPE
Fire Rating : 1A* , 5B* , C*

Container : Outer Layer of Pent Foam, about 11 mm thick shield by PVC film

Function : Flame Activated

07/02/2019

https://youtu.be/OgT_FDz0ulc

FEATURES

SELF ACTIVATING
The Fire Extinguisher Ball works automatically when in contact with fire.
Install within 30cms over any fire hazard.

ALARM
When the ball explodes, the built-in alarm goes off releasing an approximately 138-decibel noise.

LIGHTWEIGHT
Weighing at 1.3 Kg Approx, it is suitable for anyone, Women, Children and Elderly people.

EASY TO USE
No training required. Just throw the ball with one hand into the fire.

SAFE
No need to get close to the fire.
The ball will not self-ignite when shaken or damaged.
The outward driving force from activation of the ball does not harm human or environment.
Non-toxic to the environment. Fire Extinguisher Ball is made from human and environmentally friendly materials.

FAST AND EFFECTIVE
It activates within 5-10 seconds after contacting the fire.
When used together with two or more balls, it can suppress a large fire.

TECHNICAL
SPECIFICATIONS
FIRE EXTINGUISHING BALL
Dimension : Sphere, Diameter 15cm

Gross Weight : 1.30 Kg Approx

Chemical Weight : 1.25 kg

Fire Extinguishing Agent : Non-Toxic Mono Ammonium Phosphate

FIRE TYPE
Fire Rating : 1A* , 5B* , C*

Container : Outer Layer of Pent Foam, about 11 mm thick shield by PVC film

Function : Flame Activated

Rajyog Fire Services Pvt Ltd.

Yogesh Asher
+91-9821214434

rajyog fire Services Pvt. ltd.Foam compound Storage Tanks, made of Stainless Steel – SS304/SS316, storage capacity (as s...
04/02/2019

rajyog fire Services Pvt. ltd.Foam compound Storage Tanks, made of Stainless Steel – SS304/SS316, storage capacity (as specified by client), and shall incorporate regular design features such as expansion dome (for above 400 ltrs. capacity), sump at bottom of tank, vent valves, inlet and outlet connections, PV vent, etc. Level gauge (optional) can be provided.

Address

502-c Steel Chambers, Broach Street, 58, Devji Ratanshi Marg, Masjid
Mumbai
400009

Opening Hours

Monday 10am - 7:30pm
Tuesday 10am - 7:30pm
Wednesday 10am - 7:30pm
Thursday 10am - 7:30pm
8pm - 7:30pm
Friday 10am - 7:30pm
Saturday 10am - 7:30pm

Alerts

Be the first to know and let us send you an email when Rajyog Fire Services Pvt.Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rajyog Fire Services Pvt.Ltd.:

Share