Safintra Roofing India Ltd

17/12/2017

Safintra’s Solar project with non-pierce Clamps on Saflok 700 roof system

Project: M/s New Era Fabrics Ltd, Patalganga Dist. Raigad (MH).
Roof profile: Saflok 700
Clamps: Non-pierce Aluminium alloy clamps
Area: 30,000 SM approx.
Project executed: 2016-17

Safintra Roofing India Limited is proud to announce one of their landmark project with non-pierce aluminium clamps for solar installation over concealed fix roof system Saflok 700.

Saflok 700 is a leak-proof roof solution offering continuous non-punctured roof sheets with double lock concealed clip system.
For such non-pierce roof system designing screw-less accessory for solar assembly greatly proved to be a boon to both sheeting as well as solar industry.
These clamps are well tested to qualify parameters required for any roof-top applications.

Safintra’s non-pierce aluminium alloy clamps are specifically designed for solar installation by avoiding piercing on premium roof structures and enhancing roof aesthetics & longevity.

Client is thrilled to share with us, the overall performance of their concealed roof system coupled with Safintra’s non-pierce clamps for solar application.

Such acknowledgements will definitely encourage us for venturing many more such type of roof-top applications like Life-line systems, Walkways, Piperack/Cable trays, Lightning arrestors, Hoardings, HVAC panels..

Please contact Safintra Technical team for more details.

Safintra Roofing India Limited
B : +91-22 27402574 | Fx: +91-22 27402575
Email: [email protected] | Website: www.safintra.in
Works: Plot-A/1 MIDC- Taloja | Raigad, Maharashtra- 410208 | India.

05/12/2017

31/10/2017

20/10/2017

Happy Diwali from Safintra India team !!

25/04/2017

SAFINTRA ROOFING’s article ‘Seamless Cover’ in Construction World Magazine - See more at: http://safintra.in/article/195/SAFINTRA-ROOFING%E2%80%99s-article-%E2%80%98Seamless-Cover%E2%80%99--in-Construction-World-Magazine .Oy5l733g.dpuf

30/03/2017

Safintra Clamps for Solar Panels, Metal Roofs Have Natural Symbiosis -

Solar panels present a natural symbiosis with metal. The seams between roofing panels are a good place to anchor photovoltaic panels, without the necessity of punching holes in the roof. Further, the life expectancy of a photovoltaic system is 20 to 25 years. A conventional roof at some point would have to be torn out underneath it, but with metal, the PV system will wear out before the roof has to be replaced.



With metal, you`re solar-ready, even if the building owner isn`t ready to put a solar system on. If you think you want a solar array in the next 5 to 10 years, put a metal roof on, because it will still outlast the solar array.



Another green advantage is recycling — many metal roof and wall panels are made from a large percentage of recycled content and can be recycled at the end of their useful lives. It is not like asphalt shingle that, when its time is up, it winds up in a landfill. Aluminium panels typically contain 60 to 85 percent recycled content, copper about 45 percent, and steel at least 25 percent. The metal has an inherent value which provides the incentive to recycle.



Metal is the ideal substrate for rainwater harvesting; it is designed to shed water, and the surface is inert, so no oil or other pollutants will leach out, making the water suitable for outdoor sprinkling.



Facility managers may appreciate the technical benefits of a metal building envelope, but aesthetics can add architectural drama to any building. A pitched metal roof can dramatically change the aesthetics of a building built 20 or 30 years ago.



Safintra Roofing (India) Limited introduces Clamps for solar compatible roof system. To purchase this product, Contact us on +91 9892413410 or email [email protected]. Visit us on http://safintra.in/

- See more at: http://safintra.in/article/190/Safintra-Clamps-for-Solar-Panels,-Metal-Roofs-Have-Natural-Symbiosis .fNiaTxFp.dpuf

24/03/2017

Safintra Metal Roofing and Wall Cladding Offer Energy Efficiency Possibilities
Metal offers fascinating possibilities for energy efficiency. Metal sheets with insulation beneath can be installed on roofs or walls, and in recent years have been in applications where new building codes are calling for R-values.



Higher energy costs and more stringent regulations have prompted engineers to explore a lot of options for cooling air with a metal building envelope. An interesting development worth noting is phase-changing material that absorbs heat during the day and releases it during the night time to help even out and balance a building`s temperature.



On A Cool Metal Roof – Solar Refractive Index (SRI):-



If building owners do not want to harvest heat, they can select a reflective metal roof. More than half of the sun`s energy is infrared, which is responsible for heat. Infrared-reflecting pigments in even dark colours of paint can reduce the amount of heat that a roof or wall would otherwise absorb.



Metal roofing does not really `create` heat, in fact many metal roof products exhibit excellent reflective properties, and many are listed with Energy Star. These cool roofs reflect a high percentage of the sun`s energy, resulting in a cooler surface temperature, and less heat that is transmitted into the building.



Safintra Roofing India specialises in bespoke roofing solutions, customised to suit customer’s requirement. For details, call us on +91 9892413410 and +91 22 2740 2574 or email [email protected]

24/03/2017

Safintra’s Metal Retrofitting Roofing Offers Long-Term Savings Potential
Building owners who hesitate at the cost of a new metal roof or wall system ought to think hard about the long-term saving potential.

Although upfront costs could be usually higher than other roofing systems; a metal retrofit can last longer, depending on the substrate. That compares favourably with the typical conventional roof.

Retrofitting metal roofing has been around for many years, is being used on existing buildings and its capability is known, but it has gained popularity only in the last decade. One does not even have to tear off the existing roof in many cases.

It can still be difficult to get building owners to buy into the idea of life-cycle cost, although the overall economic benefits go beyond simple replacement expenses. In addition to long life, metal offers many design possibilities, can contribute to energy efficiency and needs very little maintenance.

Government projects prefer metal roofs because of their life-cycle costs. They do not sell their buildings and are in them for a very long time.

Commercial building owners, are sometimes more reluctant to make the investment, but many have found that they can retrofit a sloped metal roof over the old flat one, add insulation, save money on maintenance, and use painted metal roof as an aesthetic element to the building.

For metal roofing, call us on +91 9892413410 and +91 22 2740 2574 or email [email protected]

02/02/2017

Hotel BLURAY uses Trimflute Roofing Sheet by Safintra Roofing India -
Continuing in its tradition of excellence, Sanfintra Roofing India provided roofing material for a hotel project i.e HOTEL BLURAY at Belgaum, Karnataka through our trader, Sumangal Traders.

Project Details:

Project: HOTEL BLURAY at Belgaum, Karnataka

Profile: Trimflute 1015 in Lagoon Blue

Channel partner: Sumangal Traders

Year: 2016



Project description:

The client wanted durability and also a trendy looking roofing and cladding system. Trimflute is used as roofing as well as a cladding profile in this project. It is a subtle square fluted screw-fix profile sheet. It is roll-formed with 6 trapezoidal ribs at 203 mm, centres with a net cover of 1015 mm. The rib height is 26.5 mm and can be fixed in accordance with Safintra Roofing India’s recommendations. It can be factory cranked, curve and bull nosed to a wild range of radii.


Features & Advantages of Trimflute:

The long flute gives Trimflute its strength with long spanning capabilities & ensures excellent drainage characteristics.
Durability – The subtle square fluted steel cladding will last for a long time, and it can withstand the effects of weather and time much better than other provisions on the market. It even offers the full benefits of the latest methods for modelling wind pressures, so its tensile strength allows you the liberty to experiment with roofing designs. Its impressive durability can save a lot of money because one can avoid the frequent turnover of materials.
The trendy look of Trimflute gives strength as well as adds to the aesthetics of this project. It is available in an attractive range of colours – and will look nice and attractive for an incredibly long time. It offers the dual advantage of beauty and durability.
Easy to install and repair – Safintra Roofing India provides instructions and step by step guidance on how to personally go about installation and repair of metal roof systems.
It is compatible with lead, copper, bare steel and green or chemically treated timbers, providing a structurally superior roofing system.
Maintenance is a breeze – All you really need to do is wash the external surfaces every now and then, and you can avoid corrosion and fraying. This is a great advantage if you are often busy and don’t really have the time to climb up your roof for washing.


Project Information:

Sector: Hotel industry| Product Use: Trimflute 1015 PPGL |Colour of Top sheet: Lagoon Blue| Location: Belgaum, Karnataka | Year: 2016

- See more at: http://safintra.in/article/185/Hotel-BLURAY-uses-Trimflute-Roofing-Sheet-by-Safintra-Roofing-India- .d4EcE46O.dpuf

18/01/2017

Wonderfully designed Office building with Safzip 400 roof system at Thrissur for M/s Matrubhumi Printing & Publishing Company

Material : 0.5mm PPGL (Colour – White)

Area : 700 m2 approx.

Architect : Mr. Kamal Malik

Channel Partner : Epopsi strumat



The client required a self-supported concealed halter seam roofing system for which Safintra’s Safzip 400 is the best offered solution. This perfect solution has limitless design potential, ultimate product quality, innovation material combination & harmonious integration of shape, colours & surface.



Safzip 400 incorporates the latest state of the art production technology & is an advanced roofing system globally which makes it a Sustainable building solution.

- See more at: http://safintra.in/article/183/Wonderfully-designed-Office-building-with-Safzip-400-roof-system-at-Thrissur-for-M/s-Matrubhumi-Printing-&-Publishing-Company- .E7O5yDIq.dpuf

02/01/2017

Seasons greetings from Safintra

" Wishing you a Happy New Year 2017 ! "

06/12/2016

Advertisement published under PEB & Roofing category in Building & Construction Update, October 2016 edition. - See more at: http://safintra.in/article/173/Advertisement-published-under-PEB-&-Roofing-category-in-Building-&-Construction-Update,-October-2016-edition. .4JIiN95t.dpuf