Like we use battery in car, lorry, bus, truck, inverter, UPS, railway, telecommunication, and in so many other places, etc...
These batteries have some certain life of operation and after that it becomes dead. Why batteries become dead
Basically, the batteries are devices that translate chemical energy into electrical energy because of a reaction between the plates and the electrolyte during ch
arging and discharging it takes chemical reaction and causes sulfation on battery plate. As your battery gets older or remains in uncharged condition or if it sits unused for long duration, then the formation of lead sulfate crystals takes place. Over a period of time these lead sulfate crystals enlarge and build up to the point where they create an insulation barrier so dense that your battery will no longer accept or release energy. Battery life Booster electronic anti sulfation system will prevent this problem once and for all. Battery became dead. How does Battery life Booster works
Battery Life Booster generates specific tuned electric pulses and induces into the battery. These pulses attack and activate the sulfate molecules that adhere to lead plates inside, thus preventing those molecules from crystallizing and permanently attaching to the lead plates. In this way Battery Life Booster prevents permanents sulfation in the battery. The pulses are so effective, that they also dissolves already crystallized sulfate is in the old batteries. The sulfate is reactivated and bought back to the electrolyte as active material, rejuvenating the battery. How do you measure Battery Life Booster Efficiency
You can measure the Battery Life Booster efficiency yourself, by using a Hydrometer that measures the specific gravity of the electrolyte in the battery. First measure the acid concentration, and then mount the Battery Life Booster. Make sure that the measurements are done when the battery is fully charged, either by a battery charger. After a few days, measure the concentration again and compare. Note: A battery in good condition has specific gravity of approx 1.26 to 1.30. if the concentration is less than 1.24, the battery is sulfated and the capacity is reduced to around 50%. Benefits using Battery Life Booster
Sulfate is the most common cause of battery failure. It makes the battery last only a limited amount of time. The internal parts of battery are designed and produced to last much longer period of time. In other words, batteries could last much longer than they usually do. A clean battery, provided by the use of Battery Life Booster, gives the following benefits:
(1) A several extra years of operation. (2) Increased capacity that contributes to more cranking power. (3) Reduced production, transportation, and disposal of lead, which is an environmental unfriendly material. (4) It saves money for repeatedly purchasing of battery. Specification:
Battery voltage : 12v and 24v models for various applications available
Battery types : Suitable for any lead acid battery; like Open, ventilated, SLA, VRLA and gel batteries. Battery capacity : 0 - 400Ah. Current consumption : approx 200mA when in operation (approx 0.00001A in standby mode)
Operates at Voltage :> 12.5V (below this voltage, the unit shuts off and enters standby mode)
Pulse repetition frequency : 15000 Hz
Pulse strength : Approx 3A
Indication : LED indicates operational mode (off in standby mode)
Physical dimensions
(LxWxH) :90x51x25 mm
Weight : 100gm. USEFULL TIPS & NOTES ON Battery Life Booster
1. Battery Life Booster to be used on any lead acid batteries.
2. Choose proper voltage rating of Battery Life Booster for respective batteries. Under no circumstances should a lower rating of Battery Life Booster to be installed on higher rating battery. (eg: 12V Battery Life Booster on 24V battery).
3. LED lights glow when Battery Life Booster is working.
4. Battery Life Booster will keep cell plates in good condition.
5. Battery Life Booster does not increase power efficiency of cells beyond the respective rating of the cells.
6. Ensure Battery Life Booster is installed on the battery, even while external charging is carried out.
7. On installing Battery Life Booster, if the specific gravity level in each cell is not uniform and fluctuates, check the charging system and also make sure that there are no weak cells in the battery.
8. Under no circumstances, the battery gets discharged because of Battery Life Booster. Battery Life Booster is a micro load across the battery and consumes negligible current of approx. 200mA when in operation and 0.0001A in stand by mode.
9. Battery Life Booster is designed to break only the crystals of sulfate on the plates and under no circumstance cause damage to the good cell plates.
10. Batteries may fail due to many reasons even with Battery Life Booster installed. In such cases battery failure cannot be attributed to the Battery Life Booster e.g. an old heavily sulfated battery may fall when Battery Life Booster is installed due to brittle cell plates collapsing after the removal o sulfation.
11. Battery Life Booster doesn’t rejuvenate a dead battery cell which may internally damage.
12. Battery Life Booster is not an alternate to regular maintenance. Adulterated distilled water loosely connected terminals could lead to draining of batteries. Hence regular maintenance of batteries is a must.
13. If you plan to leave your automobile idle for long duration it is advisable to remove Battery Life Booster as a precautionary measure.
