Prototek Rapid Prototyping

Casa
Italia
Valenza
Prototek Rapid Prototyping

Service professionale di stampa 3D, progettazione CAD e scansione 3D. Dal 2019, 𝗣𝗥𝗢𝗧𝗢𝗧𝗘𝗞 fa parte del Gruppo Trust Technology Services S.r.l.

Nata nel 2007, 𝗣𝗥𝗢𝗧𝗢𝗧𝗘𝗞 è un 𝗦𝗲𝗿𝘃𝗶𝗰𝗲 𝗱𝗶 𝗦𝘁𝗮𝗺𝗽𝗮 𝟯𝗗 che opera nel settore della Produzione mediante tecnologie additive, Prototipazione Rapida, Scansione 3D e Progettazione CAD.

𝗣𝗥𝗢𝗧𝗢𝗧𝗘𝗞 è un punto di riferimento per le Imprese che hanno necessità di produrre componenti personalizzati, piccole produzioni o produzioni in serie, sfruttando tutti i vantaggi della tecnologia di stampa 3D. (TTS), affer

mata Azienda nel settore dell’ITC.

𝗣𝗥𝗢𝗧𝗢𝗧𝗘𝗞 offre una 𝗰𝗼𝗻𝘀𝘂𝗹𝗲𝗻𝘇𝗮 𝗮𝘃𝗮𝗻𝘇𝗮𝘁𝗮 durante tutto il percorso produttivo, a cominciare dal disegno del modello fino alle rifiniture post produzione. Tale guida consente al Cliente di ottimizzare il progetto e renderlo molto più funzionale per l’𝗔𝗱𝗱𝗶𝘁𝗶𝘃𝗲 𝗠𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗶𝗻𝗴.

𝗣𝗥𝗢𝗧𝗢𝗧𝗘𝗞 offre una vasta gamma di soluzioni in settori differenti: Automotive, Aerospaziale, Oil & Gas, Industrial Design, Meccanico, Illuminotecnica, Gioielleria, Arte, Design, Hobbistica, Packaging. Gli elevati standard qualitativi e di riservatezza garantiti dal personale tecnico altamente specializzato, permettono alla Società di immettere sul mercato linee di prodotti innovativi, strategicamente vincenti e in tempi ridotti.

𝗧𝗲𝗰𝗻𝗼𝗹𝗼𝗴𝗶𝗲 𝘂𝘁𝗶𝗹𝗶𝘇𝘇𝗮𝘁𝗲:
MJF, LASER SINTERING,DLP, MJP, STEREOLITOGRAFIA, DLS, FFF.

𝗣𝗮𝗿𝘁𝗻𝗲𝗿𝘀:
SELLTEK, HP, DESKTOP METAL, CARBON.

𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗰𝗮𝘇𝗶𝗼𝗻𝗶:
HP Jet Fusion 3D Printers, ZBrush, RhinoCeros, Rhino PRO-J.

03/09/2026

No compromises on the trail.

just launched the new SLR XC range, built specifically for cross-country:

extended padding for long days out, a tapered rear for a fast return to the saddle after technical sections, and a shell shaped to work with full-suspension frames.

Available in Carbon, Elite, Advan rails and with 3D padding.

At the top of the range, the SLR XC 3D Carbon brings 3D printed padding to the trail for the first time, powered by DLS™ technology.

Selle Italia designed the surface. We worked together on the internal lattice, zone by zone

— more absorption where the trail hits hardest, more response where every watt counts.

Printed as one piece.
Reinforced edges.
No shortcuts.

Discover the new SLR XC — link in bio.

01/09/2026

Softness without compromise.
Meet EPU Pro 50, the latest addition to our Carbon DLS™ materials portfolio.

✔️ Single-part, dual-cure elastomer
✔️ 820% elongation at break
✔️ Shore 53A soft-touch feel
✔️ Up to 70% faster print speeds than previous Carbon elastomers.

Designed for applications that demand flexibility, durability and productivity:
from seals and gaskets to cushioning and high-elongation components.

Think EPU Pro 50 could fit your project? Get in touch:
📩 [email protected]

27/08/2026

When does .pl Multi Jet Fusion really create value?
Not every part is a good candidate for Additive manufacturing.

And not every application requires HP MJF.
The technology delivers the most value when it solves a real production challenge:

🔹Functional end-use parts
🔹Low to medium volumes without tooling investment
🔹Complex geometries beyond traditional manufacturing limits
🔹Faster design iterations
🔹Part consolidation opportunities
🔹Reduced lead times.

The key is not the technology itself.
It’s the fit between:
geometry, volume, and production strategy.

HP Multi Jet Fusion makes the difference when tooling costs, design constraints, or supply chain limitations become the bottleneck.

The question is not:
"Can we 3D print this part?"

It is:
"Does additive manufacturing make business sense for this application?"

We help companies evaluate the right applications from the early design stage.

Send your inquiry:
📧 [email protected]

25/08/2026

Seven Carbon systems. But that’s not the real milestone.
What truly matters is what those systems have enabled us to become.

For us, Carbon DLS™ was never about adding another 3D printing technology.
It was about building a scalable, reliable production capability.

Over the years, we've supported production across a wide range of industries:

Selle Italia — High-performance cycling saddles
Filippi Boats — Olympic rowing components
alexander wang 's Griphoria — Luxury fashion applications
BionIT Labs — Advanced prosthetic sealing systems
Industrial end-use components

Different industries. Different requirements.
One common challenge: transforming Additive manufacturing into a robust, repeatable production process.

Today, competitive advantage isn't defined by access to the latest machine.
It's built on the ability to integrate the right materials, design expertise, and process control into one consistent manufacturing workflow.

That's where Additive manufacturing delivers real business value.

📝 Full interview in the comments.

20/08/2026

What if a spare part didn't need to exist until it was actually needed?

For years, spare parts have been treated as a logistics problem.

More storage.
Better forecasting.
Larger production batches.
Bigger warehouses.

Additive manufacturing changes the equation.

After more than 20 years working with production-grade additive manufacturing, one conclusion remains consistent:

Inventory is often a design decision—not just a logistics one.

When a component can be produced on demand, physical stock becomes an option rather than a requirement.

Insight #13:
The digital file can be more valuable than the physical inventory.

18/08/2026

August is when supply chains are truly put to the test.

Traditional manufacturing slows down. Tooling lead times get longer, minimum order quantities remain fixed, and seasonal demand puts every constraint under pressure.

Additive manufacturing doesn't follow a summer schedule.

✔ No tooling delays.
✔ No minimum batch sizes.
✔ No moulds sitting idle in a supplier's warehouse.

When a critical component fails in the field, a validated replacement can be in production within 48–72 hours from receiving the file—using the right material and with full traceability.

That's what on-demand manufacturing looks like.

And when your engineering team comes back in September with new iterations to validate, we'll be ready.

Planning your next production challenge?
📧 Get in touch: [email protected]

13/08/2026

How much capital is sitting on your shelves right now? ⚙️
Spare parts that may never be used again.
Legacy components.

Obsolete stock from products you no longer manufacture.
Inventory is not just space — it’s frozen capital.

Additive manufacturing changes this structure.

With on-demand production, the digital file becomes your warehouse:

→ No minimum order quantities
→ No obsolete stock risk
→ No capital locked in physical inventory.

👉Swipe through to see how manufacturers are reducing inventory exposure with AM.

📧 Contact Prototek's team:

[email protected]

11/08/2026

You’re reading this in August — which means Q4 is already taking shape.

The components you’ll need for qualification, validation, and assembly don’t start in October.

They start now. In design.

Additive manufacturing changes this timing completely:

→ No tooling lead times
→ No minimum batch constraints
→ No inventory decisions before demand is known.

Use August to finalise geometry, lock materials, and run prototypes.

In September, production follows the design, not improvisation.

This is exactly what we delivered for Bonzano Art Group:

PA12 components produced via HP Multi Jet Fusion, ready for validation after the summer break.

The work you do now defines what you can actually deliver in Q4.

We’re back on August 24th. Briefs are open.

[email protected]

🔗 Case study: link in bio

06/08/2026

Choosing the right material can make or break an Additive manufacturing application.

Four materials. Four environments. One key decision.

In industrial 3D printing, material selection is not just a technical detail.

It impacts:

• Part performance
• Production reliability
• Qualification time

Because not all polymers behave the same.

The right choice depends on the application, operating conditions, and final requirements.

Swipe through to compare →
📌 Save this guide for your next AM project.

[email protected]

Indirizzo

Via Dell'Artigianato 45
Valenza
15048

Sito Web

https://prototek.it/preventivi/landing/

Notifiche

Lasciando la tua email puoi essere il primo a sapere quando Prototek Rapid Prototyping pubblica notizie e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.