Pro-Logic Technologies Limited Nairobi 0723763173 / 0101763173

  • Home
  • Kenya
  • Nairobi
  • Pro-Logic Technologies Limited Nairobi 0723763173 / 0101763173
Directions Website Contact the business

Pro-Logic Technologies Limited Nairobi 0723763173 / 0101763173 We provide electric power solutions like solar installation, power backup setup and management, Power generator installation, repair, maintenance and service.

We Repair Electric Home & Office Appliances too.

10/10/2026

KENWOOD RECEIVER REPAIR IN NAIROBI – 0723763173 | PRO-LOGIC TECHNOLOGIES LIMITED

Is your Kenwood receiver not powering on, producing no sound, displaying PROTECT, or experiencing audio distortion? Pro-Logic Technologies Limited provides professional Kenwood receiver repair and audio amplifier troubleshooting services in Nairobi, Kenya.

We diagnose and repair a wide range of Kenwood audio equipment, including home theatre receivers, AV receivers, stereo amplifiers, and other compatible sound systems.

KENWOOD RECEIVER FAULTS WE REPAIR

We handle Kenwood receivers that fail to power on, remain in standby mode, display protection errors, produce no sound, have one channel that is not working, experience low audio output, produce crackling or distorted sound, overheat, or shut down unexpectedly.

Our diagnostic process covers power supply circuits, standby power sections, amplifier output stages, speaker protection circuits, audio processing boards, relay circuits, damaged connectors, and other faulty electronic components.

KENWOOD RECEIVER POWER SUPPLY REPAIR

A Kenwood receiver that does not start may have a faulty power supply, damaged fuse, defective standby circuit, or failed electronic components. We inspect the power supply and identify the cause before recommending the appropriate repair.

KENWOOD AMPLIFIER AND NO-SOUND REPAIR

If your receiver switches on but produces no sound, the fault may involve the amplifier section, speaker relay, input circuitry, audio processing, or speaker connections. Proper testing helps identify the actual cause instead of replacing components unnecessarily.

KENWOOD RECEIVER PROTECTION MODE REPAIR

When a receiver displays PROTECT or shuts down shortly after switching on, possible causes include shorted output transistors, speaker wiring problems, excessive DC voltage at the outputs, or internal circuit faults. We troubleshoot the protection system and investigate the underlying problem.

KENWOOD HOME THEATRE AND STEREO RECEIVER REPAIR IN NAIROBI

Whether you use your Kenwood receiver for home entertainment, music playback, a home theatre system, or a stereo setup, professional diagnosis can help restore reliable operation

06/10/2026

TELEVISION REPAIR NEAR AMBASSADOR NAIROBI C*D – CALL 0723763173

Looking for reliable television repair near Ambassador Nairobi C*D? Pro-Logic Technologies Limited provides professional TV diagnostics and repair services for customers around Ambassador, Kenyatta Avenue, City Hall, Tom Mboya Street, Moi Avenue, River Road, Luthuli Avenue, Ronald Ngala Street, OTC and the wider Nairobi C*D.

Our main workshop is located at Luthuli Avenue, Kangari Building, 3rd Floor KA7, making it convenient for customers bringing televisions from Ambassador and other parts of Nairobi C*D.

We repair different types of television faults, including TVs that fail to power on, TVs with sound but no picture, TVs with picture but no sound, dark screens, blinking standby lights, distorted displays, horizontal or vertical lines, half-screen display, flashing pictures, HDMI problems, USB faults, Smart TV problems and televisions that keep restarting.

Our technicians work on popular television brands including Samsung, LG, Sony, TCL, Hisense, Skyworth, Vitron, Vision Plus, Sayona, Von, JVC and other LED, LCD, Smart TV, QLED and OLED models.

Common repairs include LED backlight replacement, power supply board repair, main board and motherboard repair, T-Con board repair, firmware-related troubleshooting, audio circuit repair, HDMI port repair, power circuit faults and other electronic board-level problems.

If your television has developed a fault, proper diagnosis is important before replacing expensive components. We first assess the television to establish whether the problem is related to the power supply, main board, backlight system, display circuitry, audio section or another component.

Customers around Ambassador, C*D, City Market, Kenyatta Avenue, Moi Avenue, Kimathi Street, Tom Mboya Street, River Road, Luthuli Avenue, OTC, Ronald Ngala and surrounding areas can bring their televisions to our workshop for assessment and repair.

We also assist customers who need TV spare parts, including selected power boards, main boards, LED backlight strips and other television components, subject to model and availability.

For customers who cannot easily transport a large television,

04/10/2026

TV SCREEN REPAIR IN MURANG’A – CALL 0723763173

Do you have a TV with a cracked screen, broken display, lines across the picture, dark patches, half display, flickering images, or sound without picture? Professional TV screen diagnosis and repair services are available in Murang’a County.

We handle screen-related faults on Samsung, LG, Sony, TCL, Hisense, Skyworth, Vitron, Von, Vision Plus and other television brands.

TV SCREEN PROBLEMS WE HANDLE

We diagnose and repair televisions experiencing:

Cracked or damaged screens

Vertical lines

Horizontal lines

Half-screen display

Black screen

White screen

Flickering picture

Dark patches

Backlight problems

No picture but sound is available

Distorted images

Colour display problems

Intermittent picture

Display disappearing after the TV warms up

T-Con and display connection faults

LED backlight failure

Panel-related faults

A TV that has sound but no picture does not always mean the screen panel is damaged. The fault may be located in the LED backlight system, T-Con board, main board, power supply or display connections. Proper testing is therefore important before purchasing a replacement screen.

TV SCREEN REPLACEMENT IN MURANG’A

Where the television panel is physically cracked or internally damaged beyond economical repair, we can assess the TV for screen/panel replacement. The replacement must match the television's exact model and panel specifications.

We also handle related television services including motherboard repair, power board repair, T-Con repair, LED backlight replacement, TV diagnostics and wall mounting.

SERVICE AREAS IN MURANG’A COUNTY

Our TV repair services cover Murang’a Town, Maragua, Kenol, Makuyu, Kigumo, Kandara, Kahuro, Gatanga and surrounding areas.

For TV screen diagnosis, repair or replacement assistance, contact:

Pro-Logic Technologies Limited
Luthuli Avenue, Kangari Building, 3rd Floor KA7, Nairobi
0723763173
[email protected]

Bring or arrange assessment of your TV before spending money on unnecessary parts. A proper diagnosis helps determine whether the problem is the screen panel, backlight, T-Con, motherboard, power supply or another dis

INDUSTRIAL SMPS REPAIR SERVICES IN NAIROBI, KENYA | 0723763173Pro-Logic Technologies Limited provides professional indus...
04/10/2026

INDUSTRIAL SMPS REPAIR SERVICES IN NAIROBI, KENYA | 0723763173

Pro-Logic Technologies Limited provides professional industrial SMPS repair, testing, troubleshooting, component-level repair and power supply replacement services for industrial electronic equipment in Nairobi and across Kenya.

Industrial switch-mode power supplies are critical to automation systems, control panels, machinery, instrumentation, communication equipment and production systems. When an industrial SMPS fails, the resulting loss of DC power can stop an entire machine or production process.

We diagnose faults involving industrial power supply boards, switching circuits, MOSFETs, IGBTs, rectifiers, capacitors, transformers, inductors, PWM controllers, feedback circuits, protection circuits and output stages.

INDUSTRIAL SMPS FAULTS WE HANDLE

We can diagnose suitable industrial power supplies experiencing:

Complete power failure

No DC output

Low output voltage

High output voltage

Unstable output voltage

Intermittent power

Repeated restarting

Overheating

Blown input fuse

Short circuit

Overcurrent protection

Overvoltage protection

No-load startup problems

Excessive ripple

Switching problems

Failed MOSFETs

Failed rectifiers

Damaged capacitors

Burnt resistors

Faulty PWM controllers

Optocoupler and feedback faults

Damaged PCB tracks

Connector and solder-joint faults

INDUSTRIAL POWER SUPPLY COMPONENT REPAIR

Industrial SMPS repair may involve testing and replacing individual components rather than replacing the entire board.

Components commonly investigated include:

Power MOSFETs, IGBTs, bridge rectifiers, fast-recovery diodes, Schottky diodes, electrolytic capacitors, film capacitors, resistors, fusible resistors, thermistors, MOVs, PWM controller ICs, optocouplers, voltage-reference devices, transformers, inductors and protection components.

The correct component specifications must be established before replacement.

INDUSTRIAL SMPS FOR AUTOMATION SYSTEMS

Industrial automation systems depend heavily on stable DC power.

SMPS units may supply:

PLC systems

HMI systems

Sensors

Relays

Contactors

Control circuits

Industrial communication equipment

Instrumenta

TV LED BACKLIGHT REPLACEMENT IN KISUMU – 0723763173Is your television turning on but displaying a dark screen, dim pictu...
02/10/2026

TV LED BACKLIGHT REPLACEMENT IN KISUMU – 0723763173

Is your television turning on but displaying a dark screen, dim picture, black patches, or uneven brightness? The LED backlight strips could be faulty.

We offer TV LED backlight replacement in Kisumu for various screen sizes and television brands. We diagnose the TV first, identify the correct LED strip set, and replace damaged backlights carefully to restore proper screen illumination.

OUR BACKLIGHT SERVICES

LED backlight strip replacement

Complete backlight set replacement

Backlight testing and diagnosis

Dark-screen repair

Flickering backlight diagnosis

Dim-screen repair

LED driver and power-supply diagnosis

TV panel opening and backlight installation

Backlight strips for different TV models and sizes

Brands serviced include Samsung, LG, Sony, Hisense, TCL, JVC, Vitron, Skyworth, Vision Plus, Amtec and other LED televisions, subject to model and parts availability.

TV BACKLIGHTS AVAILABLE IN DIFFERENT SIZES

The LED strips shown are replacement components for different television models. Proper matching is important because strips can differ in length, LED arrangement, voltage, connector type and mounting position.

For a correct replacement, provide the TV model number or a clear photograph of the TV's identification sticker.

TV BACKLIGHT REPLACEMENT KISUMU

We serve customers around Kisumu C*D, Milimani, Mamboleo, Manyatta, Nyalenda, Kondele, Migosi, Nyamasaria, Lolwe, Airport area, Ahero and surrounding areas.

📞 0723763173
📧 [email protected]
🌐 prologictechnologies.co.ke

PRO-LOGIC TECHNOLOGIES LIMITED – TV BACKLIGHT REPLACEMENT AND TELEVISION REPAIR SERVICES IN KISUMU.

TVRepairKenya BacklightReplacement LEDTVRepair SamsungTVRepair LGTVRepair HisenseTVRepair TCLTVRepair

01/10/2026

📺 TELEVISION BACKLIGHT REPLACEMENT IN LAVINGTON 0723763173/0713254375

Is your TV on but the screen is dark, dim, or showing sound without a clear picture? 🔧💡

You may have a faulty LED backlight system. We diagnose and replace damaged backlight strips and check the TV after repair.

✅ Samsung
✅ LG
✅ Sony
✅ Hisense
✅ TCL
✅ Vitron
✅ Skyworth
✅ Other LED & Smart TVs

📍 Lavington & surrounding Nairobi areas
🏢 Workshop: Luthuli Avenue, Kangari Building, 3rd Floor, KA7
📞 0723763173
📧 [email protected]

Need your TV back to a bright, clear picture? Contact us for backlight diagnosis and replacement.

LEDTVRepair SmartTVRepair SamsungTVRepair LGTVRepair SonyTVRepair TelevisionRepair TVTechnician NairobiRepairs

Fundi Radio SIM – Mobile Phone & Radio Repair Services 0723763173Fundi Radio SIM provides mobile phone and radio repair ...
30/09/2026

Fundi Radio SIM – Mobile Phone & Radio Repair Services 0723763173

Fundi Radio SIM provides mobile phone and radio repair services for customers looking for reliable diagnosis, component-level repair, replacement of faulty parts and restoration of damaged electronic devices.

Whether a phone has stopped charging, a radio has no sound, a device has power problems, or an electronic board requires troubleshooting, professional diagnosis is important before replacing expensive components.

MOBILE PHONE REPAIR SERVICES

Fundi Radio SIM can handle various mobile phone repair requirements, including:

Charging port repair and replacement

Battery replacement

Phone not powering on

Phone restarting continuously

No charging

Slow charging

Charging-port damage

Broken screens

Touchscreen problems

Display problems

Broken buttons

Microphone faults

Speaker replacement

Earpiece repair

Loudspeaker problems

Camera faults

Flashlight problems

Vibration problems

SIM-card detection problems

Network-related faults

Wi-Fi problems

Bluetooth problems

Water-damaged phones

Short-circuit diagnosis

Motherboard troubleshooting

Power-management faults

Software-related problems

PHONE MOTHERBOARD REPAIR

Modern smartphones contain highly integrated circuit boards with small surface-mount components.

A phone motherboard can develop faults because of:

Physical impact

Liquid damage

Electrical surges

Poor-quality chargers

Corrosion

Overheating

Short circuits

Component failure

Previous repair attempts

Component-level diagnosis can sometimes identify the specific circuit responsible for the fault instead of replacing the entire motherboard.

CHARGING PORT REPAIR

A damaged charging port can cause symptoms such as:

Phone not charging

Charging only at a particular angle

Intermittent charging

Loose charging connection

Computer not detecting the phone

Slow or unstable charging

The port, charging circuit and surrounding components should be inspected before replacement.

PHONE SCREEN REPAIR

Screen damage is one of the most common smartphone problems.

Fundi Radio SIM can handle issues involving:

Cracked screens

Broken displays

Black screens

Touchscreen failure

Display lines

Flickering

Partial display

No touch response

The correct replacement depends on the specific phone model and display assembly.

RADIO REPAIR SERVICES

Fundi Radio SIM also provides repair services for radios and audio equipment.

Radio faults may include:

Radio has no power

Radio powers on but has no sound

Weak sound

Distorted sound

No FM reception

Poor tuning

Intermittent operation

Broken volume control

Faulty switches

Speaker problems

Amplifier faults

Power-supply problems

Transformer faults

Capacitor failure

Resistor failure

Transistor failure

Integrated-circuit failure

PCB damage

Loose connections

Burnt components

RADIO POWER SUPPLY REPAIR

When a radio refuses to turn on, the problem may originate from the power supply rather than the main audio circuit.

Diagnosis can include checking:

AC input

DC supply

Fuse

Transformer

Rectifier

Diodes

Capacitors

Voltage regulators

Power transistors

PCB tracks

Switches

Replacing components without testing can lead to unnecessary repairs, so systematic diagnosis is important.

RADIO AMPLIFIER REPAIR

If a radio powers on but produces distorted or weak sound, the amplifier section may require inspection.

Possible causes include:

Failed amplifier IC

Damaged transistor

Faulty capacitor

Speaker damage

Incorrect supply voltage

Broken PCB connection

Overheating

Shorted components

The amplifier section can be tested to identify the defective stage.

RADIO SPEAKER REPAIR

A faulty speaker may produce:

No sound

Crackling

Distortion

Low volume

Intermittent sound

The speaker should be tested separately from the amplifier to determine whether the problem is mechanical or electronic.

MOBILE PHONE SOFTWARE SERVICES

Some phone problems are software-related rather than hardware-related.

Possible services include diagnosis of:

Boot loops

System crashes

Stuck-on-logo problems

Software corruption

Application crashes

Factory-reset requirements

System configuration problems

Software repair should be performed carefully because improper procedures can result in data loss or additional device problems.

WATER-DAMAGED PHONE REPAIR

Liquid damage requires prompt attention.

Water or other liquids can cause:

Corrosion

Short circuits

Charging faults

Display problems

Audio faults

Camera problems

Network problems

Complete power failure

A liquid-damaged phone should be inspected rather than repeatedly connected to a charger.

The motherboard may require cleaning, microscopic inspection and electrical testing.

PHONE NETWORK AND SIM PROBLEMS

Fundi Radio SIM can diagnose hardware-related problems involving:

SIM not detected

Network unavailable

Weak signal

SIM tray damage

Antenna connection faults

Network circuit problems

However, network problems can also originate from the mobile operator, account configuration or software, so proper diagnosis is necessary.

WHY PROFESSIONAL PHONE AND RADIO REPAIR MATTERS

Electronic devices contain delicate components that can easily be damaged during careless repair.

Professional troubleshooting focuses on identifying the actual cause of failure.

Instead of immediately replacing the entire device, technicians can investigate whether the problem is caused by a particular component, connection, power circuit or board section.

Fundi Radio SIM – Mobile Phone and Radio Repair

For mobile phone repair, radio repair, electronic troubleshooting, charging faults, audio faults, power problems, motherboard diagnosis and component replacement, Fundi Radio SIM provides a repair-focused service for customers who need their electronic equipment inspected and restored.

Bring the faulty device for diagnosis so the actual problem can be identified before repair work begins.

STEAM BATH BENEFITS 0723763173A steam bath provides a warm, highly humid environment that many people use for relaxation...
30/09/2026

STEAM BATH BENEFITS 0723763173

A steam bath provides a warm, highly humid environment that many people use for relaxation, wellness and post-exercise recovery. Some potential benefits include:

1. RELAXATION AND STRESS REDUCTION

The warmth and humidity can create a calming environment and help you unwind after work, exercise or a busy day.

2. MUSCLE RELAXATION

Heat can temporarily relax tight muscles and make the body feel less stiff, which is one reason steam rooms are popular in gyms and wellness centres.

3. TEMPORARY RELIEF FROM NASAL CONGESTION

Humid air may help loosen mucus and make a blocked nose feel more comfortable. It does not, however, cure infections.

4. INCREASED SKIN BLOOD FLOW

Heat causes blood vessels near the skin to widen, increasing circulation to the skin and producing a warm, flushed feeling.

5. SWEATING

Steam rooms promote sweating, which is part of the body's normal temperature-regulation process.

6. SKIN FEELS SOFTER

The humid environment can temporarily increase moisture at the skin surface, making the skin feel softer.

7. POST-WORKOUT RELAXATION

A short steam session can be incorporated into a broader recovery routine after exercise, provided the person has cooled down and rehydrated.

8. WELLNESS AND SELF-CARE

Steam baths can form part of a personal wellness routine alongside exercise, adequate sleep, hydration and relaxation.

9. SPA AND HOTEL WELLNESS

For hotels, spas, gyms and wellness centres, steam rooms provide an additional facility that can complement massage, swimming, fitness and other recreational services.

IMPORTANT SAFETY POINT

Steam baths do not burn significant amounts of body fat or “detox” the body. Any immediate weight reduction after heavy sweating is primarily water loss. Excessive heat exposure can also cause dehydration, dizziness or overheating.

Drink enough fluids, avoid prolonged sessions and leave the steam room if you feel dizzy, weak, nauseated or unwell. People with certain heart, blood-pressure or other medical conditions should consult a healthcare professional before using high-heat facilities.

30/09/2026

BOREHOLE DRILLING IN MUHORONI, KISUMU COUNTY 0723763173

Looking for professional borehole drilling services in Muhoroni? Pro-Logic Technologies Limited, together with Hydrosol Drilling Solution, provides borehole drilling and complete groundwater development services for homes, farms, institutions, businesses and commercial projects.

Our borehole solutions can include site assessment, borehole drilling, casing, borehole development, test pumping, water-quality testing, submersible pump installation, solar pumping systems, water tanks, water towers and piping.

We serve Muhoroni and surrounding areas including Koru, Chemelil, Miwani, Tamu, Awasi, Masogo and Songhor, subject to site accessibility and project requirements.

Whether you need water for domestic use, irrigation, livestock, commercial operations or an institution, we can help plan the borehole project from drilling through to water delivery.

PRO-LOGIC TECHNOLOGIES LIMITED + HYDROSOL DRILLING SOLUTION

BOREHOLE DRILLING • PUMP INSTALLATION • SOLAR WATER PUMPING • WATER TANKS • WATER TOWERS • PIPING

WaterDrilling HydrosolDrilling SolarBorehole WaterSolutions BoreholeDrillingKenya

SONY MHC-GNX70 HI-FI SYSTEM REPAIR IN NAIROBI – 0723763173Sony MHC-GNX70 Hi-Fi system repair services are available for ...
30/09/2026

SONY MHC-GNX70 HI-FI SYSTEM REPAIR IN NAIROBI – 0723763173

Sony MHC-GNX70 Hi-Fi system repair services are available for customers experiencing sound, power, CD, display, amplifier, control, or other electronic faults. The Sony system shown in the image is a powerful home audio unit with a 240W × 2 RMS amplifier section and multiple audio functions.

Our technicians handle detailed diagnosis and repair of Sony Hi-Fi systems rather than simply replacing parts without identifying the actual fault.

SONY HI-FI PROBLEMS WE REPAIR

We can diagnose and repair Sony music systems with problems such as:

Hi-Fi completely dead

Unit powers on but has no sound

One channel working while the other is silent

Very low volume

Distorted or noisy sound

Amplifier protection mode

System switching off unexpectedly

Blown amplifier components

Faulty power supply section

Damaged capacitors, resistors, transistors or ICs

CD mechanism not reading discs

CD tray or loading problems

MP3 playback faults

Radio/tuner problems

Display faults

Buttons not responding

Volume control problems

Input selection problems

Speaker output faults

PCB and control-board faults

Intermittent operation

SONY MHC-GNX70 AMPLIFIER REPAIR

The amplifier section is one of the most important parts of a high-power Sony Hi-Fi. When the system has power but produces distorted audio, weak output, no sound, or enters protection mode, the amplifier and associated circuits should be tested carefully.

A proper repair may involve checking the power rails, output stage, protection circuit, driver components, speaker connections, and PCB tracks.

CD AND MP3 SYSTEM REPAIR

If your Sony Hi-Fi refuses to read CDs, struggles to load discs, skips tracks, or fails to play MP3 media, the optical mechanism and control electronics can be inspected.

POWER SUPPLY AND PCB REPAIR

Sony Hi-Fi systems can develop faults in their power supply and electronic boards due to component failure, electrical surges, aging components, or other circuit problems. Board-level diagnosis can help identify the defective section before repair.

SONY HOME AUDIO REPAIR IN NAIROBI

We handle Sony Hi-Fi and home audio repair services in Nairo

Address

Nairobi
00602

Alerts

Be the first to know and let us send you an email when Pro-Logic Technologies Limited Nairobi 0723763173 / 0101763173 posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Pro-Logic Technologies Limited Nairobi 0723763173 / 0101763173:

Shortcuts

Share