ISME SDN BHD

ISME SDN BHD ISME SDN BHD (851110-W | 200901008131) is a group of instrumentation specialist with over 30 years of experience in field application.
(1)

ISME is the market leader in providing measuring instruments for process control applications, our products and services line spans consistency measurement, control and monitoring system, with advance technologies and solutions including i-Intelligent and i-System product range of control devices. With almost 30 years of involvement in instrumentation, we leverage our in-depth understanding of the

end-to end process and economics of manufacturing to help customers get the most out of their current operation while identifying lucrative new areas of growth. ISME instruments optimizes end performance through expert diagnosis, comprehensive process survey and troubleshooting. Propose the instruments with the right application development. With comprehensive after sales offering spans ongoing maintenance service contracts, spare parts kits and consumables, and renovations with upgrade of both technology and knowledge. What makes ISME different? Our commitment to you is to develop innovative solutions through comprehensive process knowledge and multidisciplinary approach to identify solutions. We take great pride in providing solutions that respond specifically to our customers’ real-life needs. “Your Problems → Our Solutions”

Monitoring industrial water/wastewater quality serves multiple purposes:📝 Regulatory compliance: Industries are required...
28/05/2026

Monitoring industrial water/wastewater quality serves multiple purposes:
📝 Regulatory compliance: Industries are required to treat and discharge wastewater according to standards set by the Department of Environment (DOE)
⚠️ Preventive measure: Substandard water can cause corrosion, scaling, and biological fouling in boilers, pipelines, and cooling towers
✅ Product quality: Contaminants can ruin product integrity and compromising safety in industries like pharmaceuticals, food processing, and electronic
💰 Cost saving: Optimized water quality management can reduce energy consumption, minimize chemical usage, and prevent unplanned production downtime

KF700 series electromagnetic flow meter can accurately measure the flow rate of liquid-solid two-phase fluids, such as s...
25/05/2026

KF700 series electromagnetic flow meter can accurately measure the flow rate of liquid-solid two-phase fluids, such as sewage, paper pulp, slurry and mineral slurry which has an electrical conductivity greater than 5 μS/cm.
☑ Whole welded structure
☑ Good sealing performance
☑ Zero-point stability
☑ Small power consumption
☑ Simple and reliable, no moving parts inside
☑ Virtually no pressure loss
☑ SPAN registered: FA & JA Series
☑ Interchangable remote kit (optional)
☑ Covered by I-SYSTEM 1+1 Warranty

Since 2013, we have worked closely with FLOWTECH as the authorized sole distributor in Malaysia. With ISME's I-SYSTEM 1+1 warranty, we aim to help our customers achieve better outcomes in their industrial processes.

Clamp-on ultrasonic flow meter uses the transit time principal to measure the difference between transit times of an ult...
21/05/2026

Clamp-on ultrasonic flow meter uses the transit time principal to measure the difference between transit times of an ultrasonic signals generated by a pair of transducers that are mounted directly onto the pipe. It is suitable for applications where non-intrusive measurement is required – ideal for large diameter pipeline, retrofit installations where pipe cutting and plant shutdown are not allowed.

Clamp-on ultrasonic flow meter is commonly used for applications like chilled and hot water for HVAC system (heating, ventilation, and air conditioning); energy management system; chemical processing; water and wastewater treatment, food and beverage processing etc.

21/05/2026

Precious cargo on the way 🚚

DST bypass flow meter operates on the differential pressure bypass method. 💧 PVC model: Swimming-pool water technology. ...
20/05/2026

DST bypass flow meter operates on the differential pressure bypass method.
💧 PVC model: Swimming-pool water technology.
💧 PP & PVDF Aggressive media, e.g. in water treatment.
💧 Other materials includes steel and stainless steel (DST ½ and DST V4A).

By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, these devices can be used as detectors.


At ISME Sdn Bhd, the digitalization of business operations through the implementation of an Enterprise Application Platf...
15/05/2026

At ISME Sdn Bhd, the digitalization of business operations through the implementation of an Enterprise Application Platform (EAP) is a key milestone.

The implementation of the EAP and the ISO 9001:2015 Quality Management System (QMS) framework in 2023 aims to demonstrates strong alignment with core principles of Quality Management. Through digitalization, I-SYSTEM process standardization, and continual operational improvement, our goal is to strengthen internal workflow efficiency and customer service reliability across engineering, instrumentation, automation, and after-sales support activities.

TGF460/600 thermal mass flow meter are designed for dry/clean air and Nitrogen applications, such as compressed air, ven...
14/05/2026

TGF460/600 thermal mass flow meter are designed for dry/clean air and Nitrogen applications, such as compressed air, venting air, aeration, process protection Nitrogen, combustion air, etc.

☑ High performance and wide rangeability: 100:1 turn-down ratio (capable of being extended) across 5 ranges, providing accurate measurements even at low flow velocities

☑ Rugged and intelligent design: Equipped with Bluetooth connectivity for configuration via the mobile App, offering self-diagnostics to simplify troubleshooting

☑ Easy online installation and maintenance: Insertion types allow for hot-tapping (installation/removal without stopping the flow), with no moving parts to minimize maintenance requirements

We completed a Factory Acceptance Test (FAT) for the main control panel, clarifier sub-panels and dosing panels of a wat...
04/05/2026

We completed a Factory Acceptance Test (FAT) for the main control panel, clarifier sub-panels and dosing panels of a water treatment plant (WTP) system, prior to shipment to the client’s site in Sarawak.

The master control panel (with PLC and HMI) functions as a centralised system for the WTP. The system is designed to acquire and monitor real-time data from key process, including influent raw water intake, chemical dosing, clarifier feed channels, ultrafiltration (UF) tank, chemical enhanced backwash (CEB) tank, chlorine reaction tank, and final treated water discharge to the distribution network. Acquired data is converted into trend graphs for easy visualization of performance of the system.

The clarifier sub-panels, installed at each train, provide localized control and monitoring of the sedimentation process, enabling efficient settling of suspended solids in the water. This process enhances sedimentation rates and improves solids removal efficiency.

Following the completion of FAT, we organised with our logistics partner to prepare for delivery. All panels and instruments were carefully packed with protective wrapping and secure mounting within custom-fabricated wooden crates. This precautionary step is to ensure that the panels and instruments are protected during long-distance transit and arrives on site in optimal condition for installation and commissioning.

Or***ce plate flow meter is a type of differential pressure flow meter that is commonly used in clean liquid, gas, and s...
29/04/2026

Or***ce plate flow meter is a type of differential pressure flow meter that is commonly used in clean liquid, gas, and stream mass flow measurement. Using Bernoulli's principle, the reduced area increases velocity and decreases pressure (vena contracta), where the flow rate is proportional to the square root of this differential pressure.


Industrial temperature transmitter measures temperature through sensors like Resistance Temperature Detector (RTD). An R...
24/04/2026

Industrial temperature transmitter measures temperature through sensors like Resistance Temperature Detector (RTD). An RTD measures temperature by correlating the electrical resistance of a material to temperature changes. It operates on a simple principle where the electrical resistance of the material increases linearly as the temperature rises. RTDs are widely used for precise temperature measurement in industrial and laboratory settings, especially in applications requiring high accuracy and long-term stability between -200°C and 850°C. They are commonly applied in applications such as HVAC systems, food processing, pharmaceuticals, chemical manufacturing, etc.

Address

8 & 10, Jalan PS 9, Prima Selayang
Kuala Lumpur
68100

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Telephone

+60361311388

Website

Alerts

Be the first to know and let us send you an email when ISME SDN BHD posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ISME SDN BHD:

Shortcuts

Share