Brownline

Name: Brownline
Address: Duurzaamheidsring 180, Meerkerk, 4231EX, NL
Telephone: +31183353824
Price range: Not applicable

Innovation, precision and reliability. That is what we provide. That is who we are.

05/06/2026

Did you know... Brownline has the in-house technology to connect two long drills underground? Using our Radar technology, both drill heads meet with extreme precision. 🤝 This is essential for creating longer and more complex bore paths. For example, under rivers, highways, or residential areas.

Planning a long-distance drill? We would love to help you determine the best approach to realize challenging bore paths.

02/06/2026

𝗗𝗿𝗶𝗹𝗹𝗶𝗻𝗴 𝘂𝗻𝗱𝗲𝗿 𝗿𝗶𝘃𝗲𝗿𝘀 𝗮𝗻𝗱 𝘂𝗽 𝘀𝘁𝗲𝗲𝗽 𝘀𝗹𝗼𝗽𝗲𝘀: 𝗗𝗿𝗶𝗹𝗹𝗴𝘂𝗶𝗱𝗲 𝗚𝗦𝗧 𝗸𝗲𝗲𝗽𝘀 𝘁𝗵𝗲 𝗽𝗶𝗹𝗼𝘁 𝗯𝗼𝗿𝗲 𝗼𝗻 𝘁𝗿𝗮𝗰𝗸

This past winter, Brownline Canada surveyed seven HDD crossings with Double M Construction Group Ltd in Alberta. A new pipeline for produced water is being constructed here and the pipeline route included some very challenging sections. ⚠️

Very diverse soil conditions required alternating between a jetting assembly and mud motor on some of these crossings. The drill trajectories also included reverse vertical curves and there were large elevation differences between entry and exit. The largest difference was an exit point located 65 m (213 ft) above the entry point. 📐📈

Brownline Canada helped overcome these challenges by surveying the bores with the Drillguide Gyro Steering Tool. This high-tech solution was the key to drilling the pilot bores efficiently and with absolute accuracy. Read more about this project on our website: https://drillguide.com/projects/complex-hdd-crossings-accurately-drilling-up-steep-slopes

📌 Location: Greenview County, Alberta, Canada 🇨🇦
📏 Lengths: 7x 287-990 m / 941-3248 ft
⭕ Pipe: 6.6" steel, produced water
📋 Key challenges: river/creek crossings, elevation differences, varied soil conditions
🧭 Guidance: Drillguide Gyro Steering Tool & GPS track

29/05/2026

Ben jij technisch sterk en werk je graag met high-tech hardware? Word Service- & Assemblagetechnicus bij Brownline!

Als Service- & Assemblagetechnicus zorg jij ervoor dat onze tools optimaal functioneren. Jouw werkzaamheden bestaan onder andere uit:

⚙️ Nieuwbouw en assemblage van tools
🛠️ Service, onderhoud en reparaties van bestaande tools
📦 Verzending van tools over de hele wereld

Dus ben jij praktisch ingesteld, heb je een passie voor elektrotechniek en wil je werken met unieke systemen die de hele wereld over gaan? Solliciteer direct via https://joinourteam.drillguide.com/o/service-assemblagetechnicus-tools

26/05/2026

Precision is everything in our industry! But how accurate is the world’s most accurate steering tool? 🎯

The Drillguide Gyro Steering Tool features an azimuth accuracy of 0.04°. Suppose you're drilling a section of 1000 meters / 3300 ft. What would be the maximum left/right deviation? Let us know by reacting to this post! 👇 We will reveal the correct answer tomorrow...

👍 150 cm / 4.9 ft
❤️ 120 cm / 3.9 ft
😄 100 cm / 3.3 ft
😲 70 cm / 2.3 ft

19/05/2026

Throwback Tuesday: drilling an S-curve under busy streets in Switzerland with minimal space.

A year ago, we teamed up with Huber Leitungsbau for this complex HDD project in Switzerland. The goal was clear: minimize disruption to the urban environment. While daily life continued as normal above ground, the drill crossed four railway tracks and a pedestrian tunnel underground. Thanks to our advanced Drillguide Gyro Steering Tool, the new water pipeline was installed accurately and with minimal disruption beneath the center of Stäfa.

Want to know more? Read all about this project on our website: https://drillguide.com/projects/precision-drilling-in-switzerland-s-curve-under-busy-streets

📌 Location: Stäfa, Switzerland
📏 Length: 332 m / 1089 ft
📐 Angles: -17° entry, 15° exit
⤴️ Horizontal curve: 17° right + 12° left
📋 Key challenges: S-curve, high interference, narrow margins
🧭 Guidance: Drillguide Gyro Steering Tool & GPS track

12/05/2026

Afgelopen week was er weer onze “Meat in the Middle” (voorjaarsbarbecue) bij Brownline. Een mooi moment om even stil te staan bij wat ons verbindt: kwaliteit✅, samenwerking🤝en gezelligheid 😊. Buiten het dagelijkse werk om werd het teamgevoel weer eens extra zichtbaar.

Benieuwd hoe wij dit teamgevoel ook in ons werk doorvertalen? Volg Brownline en blijf op de hoogte van onze mensen, projecten en ontwikkelingen.

Onderdeel van ons team worden? Kijk dan op onze vacaturepagina https://joinourteam.drillguide.com/

08/05/2026

Our steering service is often associated with long and complex drilling projects. But did you know that we’re also the perfect partner for projects in the smaller segment? The Drillguide Wireless Steering Tool is the key for light drill rigs. Compact, accurate, and connected to the rig in no time.

⚙️ Suitable for light drill rigs
⚡ 100% wireless: fast and efficient drilling
🌳 Minimal impact on the surroundings

Want to learn more about the Drillguide WST? Check out the details 👉 https://drillguide.com/solutions/drillguide-wireless-steering-tool

05/05/2026

𝗗𝗿𝗶𝗹𝗹𝗶𝗻𝗴 𝗮𝗻 𝗦-𝗰𝘂𝗿𝘃𝗲 𝗯𝗲𝗹𝗼𝘄 𝗮 𝗿𝗶𝘃𝗲𝗿 𝘄𝗶𝘁𝗵 𝘁𝗵𝗲 𝗵𝗶𝗴𝗵𝗲𝘀𝘁 𝗮𝗰𝗰𝘂𝗿𝗮𝗰𝘆!

In January 2026, Brownline UK surveyed this HDD crossing, where LMR Drilling UK Ltd. installed a gas pipeline under the River Swale. Previously, gas was transported to the Isle of Sheppey by a pipeline built into a bridge. This pipeline was built in the 50s and is now being replaced.

The pilot bore was surveyed using the Drillguide Gyro Steering Tool. It is the ideal steering system for challenging river crossings such as this one. The Drillguide GST delivers the highest accuracy and works without requiring equipment on the surface above the drill line. This enabled reliable and extremely precise navigation while the drill head passed 17 m / 56 ft below the river. 🧭

Want to know more? Read all about this project on our website: https://drillguide.com/projects/drilling-an-s-curve-below-water-for-a-new-gas-pipeline-to-the-isle-of-sheppey

📌Location: Isle of Sheppey, United Kingdom 🇬🇧
📏Length: 577 m / 1893 ft
📐Angles: -14° entry, 14° exit
⤴️Horizontal curve: 9° right + 32° left
📋Key challenges: S-curve, river crossing
🧭Guidance: Drillguide Gyro Steering Tool & GPS track

01/05/2026

𝗗𝗶𝗱 𝘆𝗼𝘂 𝗸𝗻𝗼𝘄... HDD is much more environmentally friendly than traditional open-cut excavation for installing underground cables and pipes? 🌱

Because excavation is only required at the entry and exit points, ecosystem disruption is kept to an absolute minimum.

Innovative downhole equipment can be used to further minimize impact. The Drillguide Gyro Steering Tool offers the highest steering accuracy without requiring equipment on the surface above the bore. This allows for drilling at a safe depth beneath protected nature reserves with minimal effects on the environment.🌿 🌍 🌻

Planning a project in a sensitive natural area? We’d love to help you find the best way to make your project a success.

28/04/2026

🇬🇧 Numbers tell the tale, especially in the world of horizontal directional drilling. As drilling operations become increasingly complex, there is a growing need for advanced measurement tools that provide greater insight into the drilling process. The Weight-on-Bit is the solution.

The Weight-on-Bit is an additional module to the Drillguide Gyro Steering Tool that provides accurate measurements of the forces acting on the drill head downhole. The driller can use this information to determine the optimum push/pull and torque forces for the borehole. The result? An optimized and efficient drill process, better insight into risks, and reduced wear and tear on downhole tools.

Read more about the Weight-on-Bit 👉 https://drillguide.com/solutions/weight-on-bit

Adres

Duurzaamheidsring 180
Meerkerk
4231EX

Telefoon

+31183353824

Website

http://www.drillguide.com/

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer Brownline nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Contact

Stuur een bericht naar Brownline:

Snelkoppelingen

Wilt u dat uw bedrijf hét hoogst genoteerde Bedrijf in Meerkerk wordt?