Sesco B.V., Veldkersweg 34, Rotterdam (2026)

02/09/2026

⚡ 𝗖𝗿𝗶𝘁𝗶𝗰𝗮𝗹 𝗜𝗻𝗳𝗿𝗮𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲: 𝗘𝗻𝗴𝗶𝗻𝗲 𝗛𝗲𝗮𝘁𝗶𝗻𝗴 𝗳𝗼𝗿 𝗕𝗮𝗰𝗸𝘂𝗽 𝗣𝗼𝘄𝗲𝗿 𝗦𝘆𝘀𝘁𝗲𝗺𝘀

Backup power is only valuable if the generator starts when it is needed.

For standby generators supporting hospitals, data centers, telecommunications, transportation, utilities, and other critical infrastructure, engine readiness is essential. In cold or low-temperature conditions, engine heating ensures the prime mover is maintained at a suitable temperature for reliable startup.

🌡️ 𝗪𝗵𝘆 𝗶𝘀 𝗲𝗻𝗴𝗶𝗻𝗲 𝗵𝗲𝗮𝘁𝗶𝗻𝗴 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁?

📌 𝗥𝗲𝗱𝘂𝗰𝗲𝘀 𝘀𝘁𝗮𝗿𝘁𝘂𝗽 𝘀𝘁𝗿𝗲𝘀𝘀: Warmer engine oil flows more readily, helping minimize the resistance and mechanical stress associated with starting a cold engine.

📌 𝗦𝘂𝗽𝗽𝗼𝗿𝘁𝘀 𝗳𝗮𝘀𝘁𝗲𝗿 𝗽𝗼𝘄𝗲𝗿 𝗮𝘃𝗮𝗶𝗹𝗮𝗯𝗶𝗹𝗶𝘁𝘆: Keeping the engine warm lets the generator reach operating conditions more quickly when emergency power is required.

📌 𝗛𝗲𝗹𝗽𝘀 𝗺𝗮𝗶𝗻𝘁𝗮𝗶𝗻 𝘀𝘁𝗮𝗻𝗱𝗯𝘆 𝗿𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀: For systems that may sit unused for extended periods, engine heating helps keep the generator prepared for an immediate start.

The right heating solution depends on the application. Engine size, coolant capacity, ambient conditions, voltage, installation configuration, and operating requirements should all be considered when selecting an engine heater.

For critical infrastructure, engine heating is not simply an accessory; it is an important part of generator readiness and system reliability.

At SESCO Industry, we offer engine heating solutions in various capacities and configurations. Browse our collection of engine coolant heaters here: https://sescoindustry.com/category/engine-and-battery-heaters/engine-coolant-heaters/

📩 Need help in identifying the right engine heating solution for your backup power application? Reach out to our team: https://sescoindustry.com/contact-page/

20/08/2026

𝗨𝗻𝗱𝗲𝗿𝘀𝘁𝗮𝗻𝗱𝗶𝗻𝗴 𝗛𝗮𝘇𝗮𝗿𝗱𝗼𝘂𝘀 𝗔𝗿𝗲𝗮 𝗜𝗱𝗲𝗻𝘁𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻: 𝗭𝗼𝗻𝗲𝘀 𝗮𝗻𝗱 𝗧𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲 𝗖𝗹𝗮𝘀𝘀𝗲𝘀
When selecting equipment for hazardous areas, markings such as Zone 1 or Zone 2 as well T4 or T6 are more than technical designations. They help determine whether equipment is suitable for the environment in which it will operate.

📌 𝗪𝗵𝗮𝘁 𝗱𝗼𝗲𝘀 𝘁𝗵𝗲 𝘇𝗼𝗻𝗲 𝘁𝗲𝗹𝗹 𝘂𝘀?
For flammable gas and v***r environments:

✅ 𝗭𝗼𝗻𝗲 𝟬: An explosive atmosphere is continuously present, exists for extended periods, or occurs frequently, typically for more than 1,000 hours per year.
✅ 𝗭𝗼𝗻𝗲 𝟭: An explosive atmosphere is likely to occur occasionally under normal operating conditions, typically for more than 10 but less than 1,000 hours per year.
✅ 𝗭𝗼𝗻𝗲 𝟮: An explosive atmosphere is not expected during normal operation but may occur briefly if conditions arise, typically for less than 10 hours per year. However, it is still sufficiently likely to require controls over potential ignition sources.

📌 𝗪𝗵𝗮𝘁 𝗱𝗼𝗲𝘀 𝘁𝗵𝗲 𝗧𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲 𝗖𝗹𝗮𝘀𝘀 𝘁𝗲𝗹𝗹 𝘂𝘀?
The T-classification relates to the maximum surface temperature that equipment can reach:

✅ T1: 450°C
✅ T2: 300°C
✅ T3: 200°C
✅ T4: 135°C
✅ T5: 100°C
✅ T6: 85°C

💡 𝗧𝗵𝗲 𝗵𝗶𝗴𝗵𝗲𝗿 𝘁𝗵𝗲 𝘁𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲 𝗰𝗹𝗮𝘀𝘀 (𝗧-𝗰𝗹𝗮𝘀𝘀), 𝘁𝗵𝗲 𝗹𝗼𝘄𝗲𝗿 𝘁𝗵𝗲 𝗰𝗼𝗿𝗿𝗲𝘀𝗽𝗼𝗻𝗱𝗶𝗻𝗴 𝗺𝗮𝘅𝗶𝗺𝘂𝗺 𝗽𝗲𝗿𝗺𝗶𝘀𝘀𝗶𝗯𝗹𝗲 𝘀𝘂𝗿𝗳𝗮𝗰𝗲 𝘁𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲.
This distinction is important: the zone identifies the likelihood and duration of an explosive atmosphere, while the temperature class addresses the equipment's surface-temperature limitation.

Both factors need to be considered alongside other requirements such as gas group, protection concept, equipment protection level, and the specific conditions of the installation.

At SESCO Industry, we understand that selecting equipment for hazardous environments requires more than matching a product to an application. It requires understanding the technical requirements of the installation.

📩 Need help identifying the right hazardous-area equipment for your application? Get in touch with SESCO Industry: https://sescoindustry.com/contact-page/

29/07/2026

Powering the Oil & Gas Industry: SESCO's Complete Product Solutions

SESCO Industries delivers a comprehensive portfolio of high-performance products engineered to meet the demanding needs of the oil and gas industry. Preparation and precaution is crucial in the oil and gas industries, and SESCO is always there to support you. Check out our offered products highlights!

ATEX Certified Solutions

❓ATEX Certification proves that equipment has pass strict tests prove it is safe to use in explosive atmosphere spaces, such as areas with flammable gasses or liquids such as oil. Follows European Union rules that ensure tools or machines don't make sparks or get too hot, thus, potentially starting fires.

✅Product highlight: 2325M23-SD2DKD-24VDC, This ATEX-certified, 316 stainless steel Midland 67 Series 2/3-way solenoid valve provides high-integrity pilot control in corrosive offshore environments.

PeterPaul Explosion Proof Solenoid Valves

❓Classified as heavy-duty, stainless steel fluid control devices built for secure use in hazardous locations with flammable gases, oil, or combustible dust, that prevents explosions.

✅Product highlight: E828D23DCCM, a PeterPaul normally closed explosion proof 1″ NPT, 2way, 24VDC solenoid valve that is CSA certified for use in hazardous locations.

Explosion proof and hazardous location Heaters

❓SESCO Industries offers ATEX and IECEx-certified explosion-proof heaters for hazardous environments, including air, immersion, enclosure, engine, and process heating solutions.

✅Product highlight: Hotstart E01011E-101A-00: 1kW, 120V single-phase hazardous-location immersion heater for reliable l**e oil, hydraulic fluid, and diesel fuel preheating in explosive environments.Hazardous-location immersion heater delivering reliable fluid preheating for engines, ensuring safe starts and reduced wear in demanding environments.

Explosion Proof Starters

❓Specialized electrical motor device house in a heavy-duty, flameproof enclosure to securely contain internal sparks and prevent them from igniting external flammable gasses, oil or dust.

✅Product highlight: 5-ST1P6A (24VDC, 10HP), being a CSA certified product, having 12-teeth, CW rotation, 1.825” pinion O.D. and SAE3 mount, 5-ST1P6A minimizes risk of explosions.

🔗Explore the full range of products on our website: https://sescoindustry.com/

13/05/2026

👀 Thief Hatches do not fail overnight. Performance drifts over time, and that is where risk develops.

In tank operations, most hatch issues are not caused by sudden failure, but by gradual deviations that impact performance:

✅Set pressure no longer matches actual conditions
✅Seals no longer provide the required tightness
✅Manual operation introduces variability
✅Replacement is postponed beyond recommended intervals

This results in product loss, operational inefficiencies and increased maintenance pressure.

Across systems from Emerson Enardo, LaMOT, Jayco and Blaylock Tank Protection, the pattern remains consistent. Performance degradation is gradual, but the impact is measurable.

At Sesco Industry, the focus is on ensuring availability of the correct hatch solutions when required, supporting continuity in storage and tank operations.

Review your installation before peak demand increases:
http://sescoindustry.com/category/v***r-control/tank-gauging-products/

15/04/2026

⚡ Efficient Heating Solutions That Keep Operations Running ⚡

Maintaining the right temperature isn’t just about comfort; it’s critical for operational efficiency, equipment protection, and workplace safety. SESCO’s electric heating systems are engineered to deliver consistent, energy-efficient performance you can depend on, even in the most demanding conditions.

When performance, safety, and efficiency matter, SESCO delivers dependable electric heating solutions built for demanding industrial and commercial environments.

🔥 Featured Products

⚡ Turret Heater – 1500W / 440V / 1 Phase (12994A)
✔️ Compact yet powerful, this unit provides efficient, targeted heating—perfect for maintaining consistent temperatures in controlled spaces.

⚡ Horizontal Fan Forced Electric Unit Heater – 12.5 kW / 480V / 3 Phase (P3PUH12CA1)
✔️ Designed for indoor commercial and industrial applications, this high-performance heater ensures reliable heat distribution with an airflow of 800 CFM.
✔️ Circular copper-clad steel sheath heating element with brazed steel fins for efficient heat transfer.
✔️ Built-in 24V transformer allows low-voltage remote thermostat control.
✔️ Chrome-plated wire fan guard with close spacing enhances operator safety.
✔️ Applications: Manufacturing facilities, warehouses, and any large indoor commercial or industrial space requiring consistent, powerful heating.

⚡ Hotstart Immersion Heater – 1kW / 120V (E01011W-158A-00)
✔️ Engineered for consistent fluid heating, this immersion heater maintains optimal temperatures with dependable performance at 27°C operating conditions.
✔️ Heats l**e oil, hydraulic fluid, water, antifreeze, asphalt, petroleum, and other critical fluids.
✔️ Fixed-setting thermostat with optional adjustable ranges for precise temperature management.
✔️ Weathertight models are CSA C/US certified, with CE-compliant options. NEMA 4 ingress protection prevents water and dust intrusion.
✔️ Applications: Engine preheating, fluid temperature maintenance, hydraulic system protection, cold-weather startup solutions.

From compact heaters to heavy-duty industrial units, SESCO provides solutions that combine durability, safety, and efficiency—keeping your operations running smoothly.

📩 Get in touch with us to request soluition for your special demand: https://sescoindustry.com/contact-page/

01/04/2026

⚙️ Reliable Spring Starters for Demanding Environments

In critical operations, engine starting systems must be dependable, efficient, and independent of external power. Amongst spring starters suppliers, SESCO is partnering with Cqstart—a brand established in 2008, recognized for engineering solutions designed to perform in the harshest environments. From compact engines to large industrial systems, explore the full range:

⚙️ 7 Series Spring Starter for Diesel Engine (Under 2L)
✔ Lightweight at just 11 kg, perfect for compact diesel engines in tight spaces
✔ Ideal for offshore platforms
✔ Waterproof and salt spray resistant
✔ High/low temperature adaptability
✔ Applicable for: Mini diesel engines under 2L

⚙️ 5 Series Mechanical Spring Starter (1–4L)
✔ A versatile solution for marine and industrial applications
✔ Waterproof, fireproof, oilproof, anti-corrosion, and salt spray-resistant
✔ Durable baking finish for extended service life
✔ Applicable for: Cummins 4B, Weichai WP4, Deutz BF3L913, Yuchai YCD4

⚙️ 1 Series Diesel Engine Mechanical Spring Starter (4–7L)
✔ Designed for remote and harsh environments like oil fields and marine use
✔ No external power supply required
✔ Withstands extreme temperatures and corrosion
✔ Applicable for: CAT C4.4, Perkins 1104, Cummins 6B, Weichai WP6, Yuchai YC4F

⚙️ 2 Series Diesel Engine Spring Starter (7-10L)
✔ Reliable and eco-friendly for mid-sized diesel engines
✔ No batteries required
✔ Resistant to humidity and salt spray
✔ Applicable for: Cummins 6C, Cummins QSB7, John Deere 6068, Weichai WP10, Deutz BF6M1015, MWM TBD234 V6/V8

⚙️ 4 Series Spring Starter (10–13L)
✔ Efficient and low maintenance for heavy-duty applications
✔ Maintenance-free grease
✔ Quick 30-second operation
✔ Applicable for: Weichai WP12, Weichai WD618, Deutz BF6M1015, MWM TBD234 V12, Hechai TBD234 V12

⚙️ 3 Series Spring Starter Motor (13-16L)
✔ Built for large engines and industrial pump systems
✔ Excellent anti-vibration performance
✔ High and low temperature resistance
✔ Applicable for: Cummins NT855, Scania DI13, Yuchai YC6T, Deutz BF8M1015, Deutz F12L413

⚙️ 6 Series Spring Starter (16–30L)
✔ Suitable for emergency generators and pump sets in large facilities
✔ Strong starting torque under heavy load
✔ Excellent anti-corrosion protection
✔ Applicable for: Cummins K19, Vman D30, Deutz BF12M1015, Wudong WD287, Daewoo DW27PV12

Whatever your project requirements, SESCO can supply a wide range of spring starters to match your specific engine and operational needs—ensuring the right fit for every application. Contact us today for a personalized quote: https://sescoindustry.com/contact-page/

Sesco B.V.

02/09/2026

20/08/2026

29/07/2026

13/05/2026

15/04/2026

01/04/2026

Adres

Telefoon

Website

Meldingen

Contact

Snelkoppelingen

Delen

Type

Verzoek om vermelding te verwijderen