HARI Solutions

Call Directions Contact the business

HARI Solutions Hari Appliance Official Service Center, Warranty Support & Services & Technical support page .

⚡📺 TV Energy‑Saver Hacks! Cut down your kuryente bill with these simple tricks:Turn off completely (wag standby mode)Ad...
07/09/2026

⚡📺 TV Energy‑Saver Hacks!
Cut down your kuryente bill with these simple tricks:

Turn off completely (wag standby mode)

Adjust brightness to “Eco” or “Energy Saving”

Use sleep timer para automatic off

Unplug when not in use

When should you perform a factory reset on your TV or device?After major system errors or glitches If apps crash often,...
26/08/2026

When should you perform a factory reset on your TV or device?

After major system errors or glitches
If apps crash often, menus freeze, or settings won’t load properly, a factory reset can clear corrupted data.

When performance slows down
Over time, cached files and updates can cause lag. Resetting restores speed and responsiveness.

Before selling or giving away your TV
It erases all accounts, passwords, and personal data — protecting your privacy.

After firmware updates gone wrong
If an update causes bugs or display issues, resetting can help restore stability.

When troubleshooting fails
If basic fixes (restarting, clearing cache, reinstalling apps) don’t work, a reset is your last resort.

After long-term use
Every few years, a reset helps refresh the system and clear hidden errors.

Remote Care TipsKeep your TV remote working smoothly with these simple reminders:Battery Care – Remove batteries if not ...
21/08/2026

Remote Care Tips
Keep your TV remote working smoothly with these simple reminders:

Battery Care – Remove batteries if not in use for a long time to prevent leaks.

Signal Check – Point the remote directly at the TV sensor; dust or objects can block the signal.

Quick Reset – If unresponsive, remove batteries for 10 seconds then reinsert.

Keep It Clean – Wipe with a soft cloth. Never spray cleaners directly.

Avoid Drops – Dropping remotes often causes sticky or unresponsive buttons.

Pairing Reminder – For smart TVs, hold the GUIDE or HOME button until the pairing prompt appears.

Dry Hands Only – Avoid using the remote when your hands are wet or moist — moisture can damage the circuit.

🖤 Wall‑mount Setup ✅ Saves space, perfect for small rooms✅ Sleek, modern look✅ Keeps TV safe from accidental bumps❌ Req...
15/08/2026

🖤 Wall‑mount Setup
✅ Saves space, perfect for small rooms
✅ Sleek, modern look
✅ Keeps TV safe from accidental bumps
❌ Requires proper installation (drilling, brackets)
❌ Harder to move or adjust position

📺 TV Stand Setup
✅ Easy to install, no drilling needed
✅ Flexible — you can move or reposition anytime
✅ Extra storage for consoles, speakers, or decor
❌ Takes up more floor space
❌ Higher risk of tipping if not sturdy

Got a new remote? Let’s register it on your WebOS Hub!01Point Remote at TV SensorMake sure the remote is aimed directly ...
12/08/2026

Got a new remote? Let’s register it on your WebOS Hub!

01
Point Remote at TV Sensor
Make sure the remote is aimed directly at the TV’s IR sensor.

Stand in front of the TV

Align the remote with the sensor

02
Press and Hold GUIDE
Hold down the GUIDE button until the registration prompt appears.

Press and hold firmly

Keep holding until you see the on‑screen message

03
Confirm Registration
Complete the pairing process by pressing OK when prompted.

Wait for the 'Registering new remote' prompt

Press OK to finalize

📺🌧️ REMINDER TO ALL! Heavy rain and flooding are everywhere — please keep your TVs safe!Avoid placing your unit near wi...
09/08/2026

📺🌧️ REMINDER TO ALL!
Heavy rain and flooding are everywhere — please keep your TVs safe!
Avoid placing your unit near windows, leaks, or damp areas.
💧 Liquid damage voids warranty!
Stay dry, stay safe, and protect your electronics this rainy season.

🧼 Step-by-Step Cleaning GuidePower off and unplugPrevents electrical damage and makes smudges easier to see.Let the scre...
06/08/2026

🧼 Step-by-Step Cleaning Guide
Power off and unplug

Prevents electrical damage and makes smudges easier to see.

Let the screen cool for 5–10 minutes before cleaning.

Dust with microfiber cloth

Gently wipe in vertical or circular motions.

Shake out the cloth regularly to avoid re-depositing dust.

Tackle smudges

Lightly dampen a microfiber cloth with distilled water.

For stubborn marks, mix distilled water with a drop of mild dish soap.

Wipe gently, then immediately dry with a second microfiber cloth.

Avoid harmful cleaners

Never use window cleaners, alcohol, ammonia, or paper towels.

These strip protective coatings and leave scratches or haze.

Clean the frame and vents

Use a microfiber cloth or electrostatic duster for the plastic frame.

Use canned air (held upright, 6–8 inches away) to clear dust from vents.

LED TVs can break down even if they’re not used for a long time because electronics age passively—time, humidity, and na...
04/08/2026

LED TVs can break down even if they’re not used for a long time because electronics age passively—time, humidity, and natural wear affect components whether powered on or not.

⚡ Main Reasons
Capacitor Drying
Electrolytic capacitors inside the power supply board lose their chemical properties over time. Even unused, they dry out and fail, often causing “no power” issues.

Moisture & Humidity
In tropical climates like the Philippines, humidity seeps into the TV housing. This corrodes circuits, clumps dust, and can cause condensation.

Dust Accumulation
Dust settles inside vents and boards. Combined with moisture, it creates conductive paths that damage components.

Thermal Stress
Day/night temperature changes expand and contract solder joints, eventually cracking them—even without active use.

Backlight Degradation
LED strips chemically degrade over time. This can cause “sound but no picture” problems when you finally turn the TV on.

🛡️ Prevention Tips
Store in a dry, ventilated room away from windows and kitchens.

Use silica gel packs or a dehumidifier to reduce moisture.

Cover with a dust-proof cloth but allow airflow.

Power on occasionally (every few weeks) to keep capacitors charged.

Avoid sudden temperature changes (like turning on AC in a humid room)

30/07/2026

Guide on How to Assemble Hari Mist Fan Pro

Why TVs internet often feel slowerAntennas: TVs usually have small, internal antennas compared to laptops or phones, so ...
25/07/2026

Why TVs internet often feel slower

Antennas: TVs usually have small, internal antennas compared to laptops or phones, so their signal strength is weaker.

Placement: TVs are often against walls or inside cabinets, which block Wi‑Fi signals.

Congestion: If your router is on 2.4 GHz, interference from neighbors, microwaves, or Bluetooth can slow things down.

🔧 What you can do

Move the router closer or reduce obstacles between router and TV.

Use 5 GHz Wi‑Fi if your TV supports it — less interference, faster speeds.

Consider wired Ethernet or a powerline adapter if possible — TVs stream much more smoothly when wired.

Add a Wi‑Fi extender/mesh node near the TV if moving the router isn’t practical.

Address

23 Hillside Centre Sumulong Highway Brgy. Mayamot
Antipolo
1870

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm
Sunday 8am - 5pm

Telephone

+639812425025

Website

Alerts

Be the first to know and let us send you an email when HARI Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to HARI Solutions:

Shortcuts

Share

Category