reefer van , refrigerator and Aircon maintenance

30/05/2026

if it takes a long time to get the temperature.
always check the return air temperature and supply air temperature.
ex.
RA -12
SA -26
SP -25
need to do manual defrost first
disclaimer
this is only for those who don't know the operation of the re**er

**ersdaily

30/05/2026

Before loading cargo

1. Pre-cool the cargo: Ensure your products are loaded at the exact desired temperature, as the re**er is designed to maintain temperature rather than pull it down from ambient levels.

2. Respect the load line: Pack cargo evenly and do not load goods above the red line marked inside the container. Blocking the airflow causes freezing.

30/05/2026

Repair connection wire to prevent electrical explosion.. using a splicing kit.

**erlife

30/05/2026

**er

30/05/2026

Did you know

Re**er containers are painted white primarily to reflect sunlight and minimize heat absorption. This passive temperature control helps reduce the workload on the container's built-in cooling system, ultimately lowering energy consumption and protecting temperature-sensitive cargo

30/05/2026

Cycle inside the re**er container
Conditioned air is blown from the refrigeration unit into the floor, travels upwards around the cargo, and returns to the ceiling unit for cooling.


**ers4re**ers

24/05/2026

24/05/2026

Auto configuration command..

The purpose of auto configuration is to automatically detect and update the controller's hardware and sensor settings.
This ensures the microprocessor perfectly recognizes all installed components (like sensors or modules) and enables the unit to function safely and efficiently


**ers4re**ers
**ersdaily
**erMadness
**er

24/05/2026

re install male plug in re**er.
if water gets into the connection it can cause an explosion

**ersdaily

**erMadness
**ers4re**ers

24/05/2026

I got over 10 reactions on one of my posts last week! Thanks everyone for your support! 🎉