Fan Repair&Restore

Fan Repair&Restore This is just a sideline I do. I repair fans only and I restore depending on its situation and model.

Tecnogas TDF-16TLDR*4 leaf fan blade*Multi angle neck*Radio sw and mw pick up*Built in LCD digital clock*Night lampA vin...
05/03/2025

Tecnogas TDF-16TLDR
*4 leaf fan blade
*Multi angle neck
*Radio sw and mw pick up
*Built in LCD digital clock
*Night lamp

A vintage fan i bought at Jan 27 2023. This is actually a favorite of mine because of the brand and the many specs it includes, but I haven't finished restoring. Now I'll be showing the process of turning this crusty fan back to it working condition.

Hitachi A.C. 16" Desk FanMy 1st vintage restorationIssue1. Filthy Unit2. Unserviced motor3. Missing oscillation K**b4. M...
19/04/2021

Hitachi A.C. 16" Desk Fan
My 1st vintage restoration

Issue
1. Filthy Unit
2. Unserviced motor
3. Missing oscillation K**b
4. Misaligned grill ribs
5. Misangled blade
6. Stuck switch button
7. Plug in bad shape

Solution
1. Unit cleaned and spray coated
2. Motor assy cleaned
3. Added an oscillation k**b
4. Alligned grill ribs and blade
5. Greased switch
6. Changed whole plug

Standard NSJ-16 PBIssue1. Stuck up motor2. Defective gearbox3. Damaged switchbox set4. Damaged neck5. Discolored base6. ...
11/04/2021

Standard NSJ-16 PB

Issue
1. Stuck up motor
2. Defective gearbox
3. Damaged switchbox set
4. Damaged neck
5. Discolored base
6. Defective blade
7. Damaged guard ring
8. Damaged back motor cover

Solution
1. Fully serviced motor assy
2. Changed gearbox gears
3. Full set switchbox and neck replacement
4. Back motor cover replacement
5. All discolored parts replaced except timer k**b

Tip #1Before, I tried trusting rewinded motors specially when they don't have fuses. So this happens when a motor gets s...
24/03/2021

Tip #1
Before, I tried trusting rewinded motors specially when they don't have fuses. So this happens when a motor gets stucked up without any fuse. It can burn your whole fan unit. Always remember to replace thermal fuse when a fan gets repair because it got stuck. Don't redirect the fuse line to the power line because the next time it gets stuck, the motor is still functioning which can melt your fan unit because theres no fuse to cut off the power when it reaches the certain hotness or degree where it shouldn't😉

Standard SDB-9 TIIssue1. Broken rear grill2. Rusted shafting3. Stucked gearbox4. Rusted buttonsSolution1. Fully serviced...
21/01/2021

Standard SDB-9 TI

Issue
1. Broken rear grill
2. Rusted shafting
3. Stucked gearbox
4. Rusted buttons

Solution
1. Fully serviced motor assy
2. Changed gearbox
3. Front and rear grill changed
4. Buttons greased and serviced

My FanStandard Orbit FanMotor still originalIssue:1. Burned wireSolution1. Wire replacement2. Fully serviced unit
04/12/2020

My Fan
Standard Orbit Fan
Motor still original

Issue:
1. Burned wire

Solution
1. Wire replacement
2. Fully serviced unit

Standard STD-16Issue1. No Oscillation k**b amd switch holder2. Corroded bushing and shafting3. Overgreased gearbox4. Bus...
03/12/2020

Standard STD-16

Issue
1. No Oscillation k**b amd switch holder
2. Corroded bushing and shafting
3. Overgreased gearbox
4. Busted thermal fuse

Solution
1. Replaced; bushing, shafting, capacitor, and thermal fuse.
2. Gearbox degreased.
3. Fully serviced motor housing.
3. Added switch holder and oscillation k**b

3D CHV-12Issue:1. Damaged stator and ventilation fan.Solution:1. Replacement both stator and ventilation fan.2. Fully se...
02/12/2020

3D CHV-12

Issue:
1. Damaged stator and ventilation fan.

Solution:
1. Replacement both stator and ventilation fan.
2. Fully serviced motor housing and gearbox.
3. Had to remove leftover paint of blade.

02/12/2020

Hello. Dito ko popost lahat ng repaired and serviced fans ko☺️

Address

Cubao

Website

Alerts

Be the first to know and let us send you an email when Fan Repair&Restore posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share