Makkah Tarpal House

09/09/2025

03/10/2024

Legend 33 Tent ICRC/IFRC Standard (Fire Retardant Optional)

ICRC/IFRC standard Multi-purpose tent which can be used for schooling, office, clinic, health centre, storage or temporary shelter purposes & can be attached to one another to make a longer structure

Separate ground sheet for use in tent is available as option in case main tent is used for living conditions / clinics

For hot climates shade net with frame is also available as option

For increase protection from heat, cold, wind, dust, and insects an Inner tent with sewed in bath tub type ground sheet is available as an option

Suitable for 15-30 persons

Dimensions
Total size
6 m x 5.62 m

Ridge height
3.00 m

Side wall height
2.10 m

Total size
5.70 m x 5.33 m

Ridge height
2.80 m

Side wall height
1.95 m

Materials
Outer tent
Roof, wall fabric: Poly- Cotton blended fiber yarns, 310 gsm - 315 gsm, 320 gsm in finished state for the walls.

Mud flaps
PVC coated fabric polyester 1100 dtex, PVC coated 2 sides 540 gsm

All PE parts
Base fabric: Woven high density polyethylene (HDPE) black fibres Coating: White low density polyethylene (LDPE) on both sides Tear strength: Minimum 100 N Tensile strength: Minimum 500 N, 15%-25% elongation in warp and wef

Ground sheet
190 gsm Polyethylene (HDPE), white, sewn in bathtub (±10%)

03/10/2024

Coverage Kitchen
Fit-for-purpose shelter kit consisting of two 4x6 m plastic sheets, two 24 m long ropes and instructions leaflet

Designed for those living in humanitarian settlements set up in the aftermath of natural disasters and humanitarian crises

Durable plastic sheeting made from woven high-density polyethylene (HDPE) black fibres fabric, laminated on both sides with low-density polyethylene (LDPE) coating

Pre-punched reinforcement bands for easy attachment, such as ropes and nails

Designed intending to minimise the impact on the environment

Fire retardant, UV stabilized, water, rot and soil resistant

Long outdoor use life in all climates

Fast and easy set up

Dimensions
Plastic sheeting
Width
4 m ±1%

Length
6 m minimum

Weight
190g/m² ±20 g under ISO 3801 (equivalent to 170g/m² minimum to 210g/m² maximum)

Additional weight of band (10%)
Total weight with band from 187 g/m² minimum and 231 g/m² maximum

Rope specifications
Diameter
6 mm

Length
2 x 24 m

Weight
320 g

Color
Black

Packaging
Rope coiled to minimize size and height of overall shelter bale

Instructions leaflet
Material
Materials Printed onto A4 size, Taffeta paper

Content
1-page assembly guide sheet with pictorial instructions

Plastic sheeting detailed specifications
Material
Woven high-density polyethylene (HDPE) black fibbers fabric laminated on both sides with white low density polyethylene (LDPE) coating

Reinforcement bands
Woven black HDPE fibers fabric and coated with grey LDPE on the outside

Tear strength
Minimum 100N under ISO 4674-1B 2003, with a test piece of 200x200mm as described in ISO 4674 annex B, in plain sheet

Tensile strength
Minimum 500N and 15% to 35% elongation in warp and weft in plain sheet under ISO 1421-1

UV resistance
The tarpaulin tensile strength under ISO 1421-1 after 1500 hours UV under ASTM G53/94 (UVB 313 nm peak) must be: Minimum 80% of the original value of the actual product, AND not less than 475N. To be tested in the plain sheet

03/10/2024

Reinforced Plastic Tarpaulin UNHCR/UNICEF Standard

Reinforced plastic tarpaulin in 4m x 5m sheet or 4 x 50 m roll developed by international research project and designed for long outdoor use in all climates

Made of woven high density black polyethylene (HDPE) fibers, warp x weft, laminated on both sides with low density polyethylene (LDPE) coating

Highly recommended for family shelter protection

190 gsm ±20 g/m² woven Polyethylene (HDPE) inner black fibers, warp x weft, laminated on both sides with LDPE coating

Denier
Min 1000

Tensile strength
Min 600N both directions warp and weft (BS 2576, 50mm grab test or equivalent)

Tear strength
Min 100N both directions (BS 4303 wing tear or equivalent) or under ISO 4674 (A2)

UV resistance
e Max 5% loss of original tensile strength under ISO 1421 after 1500 hours UV under ASTM G53/94 (UVB 313nm peak)

Welding
Only 1 is allowed, lengthwise. Min resistance 80% of original tarpaulin tensile strength in the weft under ISO 1421 plus additional procedure

Eyelets
Aluminum reinforcement eyelets or equivalent on 4 sheet sides of single sheets at 100cm (±5 cm) Centre to Centre, providing very strong fixation points

Size / sheet
4 x 5 m ±1%

Size / roll
4 x 50 m ±1%

03/10/2024

Viva Family Frame Tent ICRC/IFRC Standard

Materials Outer tent Polyester and cotton blended fibres yarns. Cotton: 40% (±10), polyester: 60% (±10). Weight: 350g/m² (±15%), Color: Natural white, not dyed

Inner tent
Polyester and cotton blended fibres yarns. Cotton: 40% (±10), polyester: 60% (±10). Weight: 130g/m² (±10%), Color: Dyed sand or cream

All PE parts
Base fabric: Woven, high-density polyethylene black fibres, fabric laminated on both sides with low-density polyethylene coating. Weight: 180g/m² (±5%), Tensile strength: Warp and weft 650N minimum, Tear strength: Warp 100N minimum, weft 100N minimum

Ground sheet
Woven polyethylene fabric, coated on both sides with low-density polyethylene. Weight: 180g/m² (±5%)

Tent parts
Inner tent
The inner tent is square in shape and is hanging inside the outer tent structure and is hooked to the frame

Chimney
A chimney reinforcement with non-perforated opening is placed at the side wall corresponding the chimney reinforcement of the outer fold. This is made of heat resistant fabric (minimum 900°C)

Partition
One inner partition made of the same material as the inner tent. The partition runs from one side wall to the opposite side wall, in order to divide the inner tent in two equal parts

Ventilators
The inner tent has 2 triangular vents at each gabble top, made of mosquito net and reinforced with 20 mm webbings

Dimensions
Centre height
2.4 m

Width
4.15 m

Ridge length
4 m

Side wall height
1.50 m

Door height
1.6 m

Centre base length
5.2 m

Front doors (width and height)
Size
1.5 x 1.5 m

Door flaps
1.5 x 1.6 m

Upper part
1.5 x 1.08 m (made of canvas)

Inner part
1.5 x 0.52 m (made of woven PE)

Rear doors (width and height)
Size
1.0 x 2.1 m

Door flaps
1.0 x 2.1 m

Upper part
1.0 x 1.58 m (made of canvas)

Inner part
1.0 x 0.52 m (made of woven PE)

Waterproof, rotproof and UV-stabilised

Easy to set up and to erect in fewer surface

The symmetric flaps offer the possibility to join two tents together lengthwise to create larger units

Fit for emergency situations, in all climates

Suitable for family of 5 people

03/10/2024

Family Tent ICRC/IFRC Standard

Key Features Waterproof, rotproof, UV-stabilised
16 m2 main floor area plus two 3.5 m2 vestibules
Large windows (360 cm wide and 60 cm long)
Minimum living area in hot and temperate climates
Suitable for family of 5 people

Dimensions
Total living area
23 m²

Main floor
16 m²

Two vestibule areas
3.5 m² x 2 = 7 m²

Centre height
2.20 m

Width
4.00 m

Ridge length
4.00 m

Side wall height
1.25 m

Centre base length
6.60 m

Total size
1.30 m x 1.40 m

Door flaps
1.40 m x 1.60 m

Upper part
1.40 m x 0.90 m (PC)

Lower part
1.40 m x 0.70 m (PE)

Materials
Outer tent
Roof: 380 gsm polycotton, natural white (±10%); Wall: 250 gsm polycotton, natural white (±10%)

Inner tent
160 gsm Polycotton, dyed sand or cream

All PE parts
Base fabric: Woven high density polyethylene (HDPE) black fibres; Coating: White low density polyethylene (LDPE) on both sides; Tear strength: Minimum 100 N; Tensile strength: Minimum 500 N, 15%-25% elongation in warp and weft

Ground sheet
190 gsm polyethylene (HDPE), white, sewn in bathtub (±10%)

03/10/2024

Viva Family Tent UNHCR Standard

Waterproof, rotproof & UV-stabilised
16 m2 main floor area plus two 3.5 m2 vestibules for a total area of 23 m2, double-fly with ground sheet
Complies to recommended minimum living area in hot and temperate climates (3.5 m2 per person), providing extra space for cold climates
Suitable for family of 5 people

Total living area
23 m²

Main floor
16 m²

Two vestibule areas
3.5 m² x 2 = 7 m²

Centre height
2.20 m

Width
4.00 m

Ridge length
4.00 m

Side wall height
1.25 m

Centre base length
6.60 m

Total size
1.30 m x 1.40 m

Door flaps
1.40 m x 1.60 m

Upper part
1.40 m x 0.90 m (PC)

Lower part
1.40 m x 0.70 m (PE)

Outer tent
Roof: 380 gsm polycotton, natural white; ±10;%; Wall: 250 gsm polycotton, natural white ±10%

Inner tent
160 gsm polycotton, natural white

Mud flaps
180 gsm polyethylene (HDPE), black, ±5;%

Ground sheet
180 gsm polyethylene (HDPE), black, sewn in bathtub ±5;%

25/08/2024

Urgent Appeal: Support Flood Relief for Bangladesh 🇵🇰🇧🇩

Salam everyone,

I'm reaching out personally because my friend in Bangladesh is leading relief efforts for the severe floods currently impacting over 3 million people there. As someone who cares deeply and is committed to helping, I'm raising funds from Pakistan 💚 to support this vital cause.

Even a small contribution of just 100 rupees can make a significant difference. Your support will provide crucial aid, including:

- Food: Non-perishable items and ready-to-eat meals
- Clean Water: Bottled water and purification tablets
- Clothing: Basic garments and blankets
- Medical Assistance: First aid kits and essential medicines

This situation is extremely critical. If you're interested in contributing, please leave a comment below or send me a direct message for bank account or EasyPaisa details.

Let's come together as friends and neighbors to show our support As sunnah Foundation . Your generosity can truly make a difference in the lives of those in need.

Contribute now and make a meaningful impact!

Please re-share so we can reach as many helping hands as possible.

Thank you for your kindness and support. 🙏

17/08/2024

Deluxe Family Tent

Materials Outer roof is made of 350 gram per m² polyester cotton blended fabric. Waterproof, UV resistant and rotproof

Wall
Outer wall is made of 200 gram per m² polyester cotton blended fabric. Waterproof, UV resistant and rotproof

Inner lining of roof and wall
Made of 130 gsm polycotton blended fabric - natural or yellow dyed

Windows
Two windows Each window has mosquito net protection (ventilation) and closing facility with wall fabric

Door
The tent has 2 doors

Side poles
4 powder-coated Ms steel poles on each side

Centre pole
1 powder-coated Ms steel centre pole

Dimensions
Total size
4 x 4 m

Main floor
16 m²

Centre height
2.85 m

Wall height
1.8 m

Windows
0.6 x 0.6 m

Door
1.8 x 1.5 m

Key Features
Waterproof, UV resistant and rotproof.

Two-fold, square-centre pole type tent offering an excellent option for shelter situations for regions like Middle East that prefer high-walled tents.

Adaptable to all weather conditions and can accommodate small to medium-sized families.

All materials used are in line with ICRC/IFRC family ridge tent specifications.