21/10/2021
ITEM FOR SALE
Handmade Flora Engraved D2 steel Gladiator Sword/Acrylic sheet with Brass Spacer, in lay Brass on Rose wood,Brass Pommel
About this item
ITEM DETAILS: OVER ALL LENGTH IS 28.7 inches long HANDLE LENGTH IS 9.1 inches long BLADE LENGTH IS 19.6 inches long
HANDLE WHITE ACRYLIC SHEET WITH BRASS SPACERS AND INLAYS BRASS ON ROSE WOOD AND BRASS POMMEL
COVER LEATHER SHEET
This Awesome custom made MASSIVE GLADIATOR SWORD BLADE KNIFE has a nice D2 STEEL BLADE
BLADE HARDNESS 58-60 HRC Which Holds The Sharp Edge For Long Time.
D2 Tool Steel is a high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the steel. D2 provides an effective combination of wear resistance and toughness.
D2 holds an edge very well. When needed, use a Diamond Wet Stone or better to re-sharpen the blade at 18-20-degrees. When done using the knife, wash it is soap and water, dry completely, coat in gun oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade if stored improperly.
Questions: if you have any question feel free to send us message we aim to answer all questions within 24 hours. FeedbacK: If you are not satisfied with our service please contact us before leaving any negative or natural feedback. We will resolve all issues as quickly as possible.
We are not responsible for any injuries associated with the use of our tools. Our products are intended for legal use only by responsible buyers. Therefore, we will not sell our products to under the age of 18.
Our Tools are very sharp so open and use them very carefully We are not responsible for any injuries associated with the use of our tools Tips to Care knife 1. NEVER STORE YOUR KNIFE FOR LONG TIME IN LEATHER SHEATH. 2. LEATHER CAN ABSORB WATER, WHICH WILL RUST THE KNIFE. 3. ALWAYS CLEAN THE BLADE AFTER USING WITH OIL OR WAX
