Druk 3D w Przemyśle

30/11/2019

05/11/2019

By combining an off-the-shelf motor and blade with a custom circular saw housing, Siemens Gas & Power division was able to save both time and money while repairing gas turbines in the field.

Read the full case study here: http://bit.ly/2UbqikB

They were able to save over $8,000 and 35 weeks from one custom circular saw.

“Not only can we make necessary custom tooling, but also parts we haven’t been able to produce with traditional methods of manufacturing." — Sam Dicpetris, Engineer, Siemens Gas & Power

04/11/2019

03/11/2019

31/10/2019

After Lean Machine CNC Machining purchased a Markforged Mark Two , two of their R&D engineers developed a custom vise/soft jaw combination.

They combined over two dozen continuous carbon fiber reinforced parts with off-the-shelf components to build this durable workholding. 💪Check out their case study to learn more:
http://bit.ly/2MX1hrQ

22/10/2019

A metal 3D printing timelapse of stainless steel being 3D printed on the Markforged Metal X 3D printer. Based on our 4th generation composite 3D printing tec...

22/06/2019

Our metal filaments combine the simplicity and safety of FFF printing with the superior properties of advanced metals, bringing metal to your benchtop.

Request your free metal sample part today: http://bit.ly/2IVFY6d

17/06/2019

With Markforged technology, Haddington Dynamics developed a complete robot arm kit from 800 parts down to 70.

Read their story: https://markforged.com/blog/3d-printed-robot-arm/?mfa=facebook

“NASA came out to build a Dexter with us, and told us we should really consider a Markforged printer,” said Dexter inventor Kent Gilson. “Within about three weeks of receiving our [Markforged printers], we had completely redesigned the robot with the carbon fiber layup and saved all kinds of volume.”