Sami Ullah Muhammad - Safety Practitioner

22/05/2018

Emotional intelligence (EI), is the capability of individuals to recognize their own emotions and those of others, discern between different feelings and label them appropriately, use emotional information to guide thinking and behavior, and manage and/or adjust emotions to adapt to environments or achieve one's goal(s)

Studies have shown that people with high EI have greater mental health, job performance, and leadership skills although no causal relationships have been shown and such findings are likely to be attributable to general intelligence and specific personality traits rather than emotional intelligence as a construct

10/05/2018

IOSH networking seminar Saudi Arabia Nice one to learn health and safety updated information....!

04/03/2018

ALARP vs ALARP vs SFAIRP

ALARP stands for "as low as reasonably practicable", and is a term often used in the regulation and management of safety-critical and safety-involved systems. The ALARP principle is that the residual risk shall be reduced as far as reasonably practicable. In UK and NZ Health and Safety law, it is equivalent to SFAIRP (So Far As Is Reasonably Practicable).

02/02/2018

Have you done Arc flash risk assessment of your facility

OSHA's electrical standards are designed to protect employees exposed to dangers such as electric shock, electrocution, fires, and explosions.


Did you ensure the safe working environment?
Are you in compliance with OSHA and NFPA 70E?
Have you ever done the risk assessment of electric shock and arc flash?
Are you aware of hazard-prone severity in your plant at the event of arc flash?
Are you aware of the PPE levels to be taken against arc flash?
The most hazardous situations are when someone is working on or near energized equipment, the equipment doors may be open, working close to electrical components, conductors, and connections.
By performing this analysis, you will know the standard protective measures and precautions/preventions to be followed against arc flash for the safety of employees

27/01/2018

Regulations in OSHA 29CFR 1910 Subparts, part of OSHA's General Industry regulations, discuss electrical safety. These regulations state that "Safety related work practices shall be employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts." In general, employers have a number of responsibilities under this regulation:

Creation and documentation of a facility electrical safety plan with defined responsibilities
Documented training in electrical and arc-flash safety, for both electrical workers and any other workers who might be affected
Identification and analysis of arc flash hazards
Provision of adequate personal protection equipment
Placement of warning labels on equipment
Provision of proper tools for safe electrical work
Verification, through annual inspections, that individual employees are complying with established safe work practices

25/12/2017

Quaid-e-Azam Baba-i-Qaum Muhammad Ali Jinnah

17/12/2017

Certified Safety Professionals (CSP)

Program Overview:

Are persons who perform at least 50% of professional level safety duties, including making worksite assessments to determine risks, assessing potential hazards and controls, evaluating risks and hazard control measures, investigating incidents, maintaining and evaluating incident and loss records, and preparing emergency response plans.

CSP Candidates:

Will have a minimum of a bachelor’s degree in any field or an associate in safety, health, or the environment.

Will have 4 years of safety experience where safety is at least 50%, preventative, professional level with breadth and depth of safety duties.

Will have a BCSP-Approved Credential:

Associate Safety Professional (ASP)

Chartered Member of the Institution of Occupational Safety and Health (CMIOSH)*

NEBOSH National or International Diploma in Occupational Health and Safety*

Must pass the CSP examination.

more information can be found on website

https://www.bcsp.org/CSP

13/12/2017

Continuing professional development is important because it ensures you continue to be competent in your profession. It is an ongoing process and continues throughout a professional's career,

CPD stands for Continuing Professional Development. It refers to the process of tracking and documenting the skills, knowledge and experience that you gain both formally and informally as you work, beyond any initial training. It's a record of what you experience, learn and then apply

06/12/2017

Tip of the Day: Calculating Fall Clearance Distance:

Using a Shock-Absorbing Lanyard and D-Ring Anchorage Connector

• First, add the length of the shock-absorbing lanyard (6 ft.) to the maximum elongation of the shock absorber during deceleration (3-1/2 ft.) to the average height of a worker (6 ft.).

• Then, add a safety factor of 3 ft. to allow for the possibility of an improperly fit harness, a taller than average worker and/or a miscalculation of distance.

• The total, 18-1/2 ft. is the suggested safe fall clearance distance for this example.

† NOTE: Should the shock-absorbing lanyard be used in conjunction with a cross-arm anchorage connector or other, the additional length of the anchorage connector must be taken into consideration

05/12/2017

https://www.facebook.com/BoardofCertifiedSafetyProfessionals/posts/1754732094597862

Are you studying for your certification? Have you achieved certification? Where are you in the Certification Process?

7 Steps to Safety Certification:
https://www.bcsp.org/SH-E-Practice/7-Steps-to-Safety-Certification

05/12/2017

Safe Driving Tip of the Day!

Tire rotation is the practice of moving the wheels and tires of an automobile from one position to another, to ensure even tire wear. Even tire wear is desirable to extend the useful life of a set of tires. The weight on the front and rear axles differs which causes uneven wear.