QHSE Conseil

QHSE Conseil Consultancy, Management, Audit and Training in Quality, Occupational Health & Safety and Environment. Implementing QHSE Management Systems for companies.

29/12/2024

Choking emergencies made simple: 3 secrets every parent should know.

Infant vs toddler choking first aid.

For infants 0-12 months old:
1. Place them at 45 degree angle.
2. Use a chair as support your arm if they are over 15lbs/7kg.
3. Give five back blows right between the shoulder blades.
If they are still choking support their head and flop them over.
5. Give five chest thrusts just below the ni**le line on the Lower third of the sternum.

For toddlers over 12 months old
1. Get on a knee at their level.
2. Lean them forward with your less dominant hand.
3. Give five back blows between the shoulder blades with the heel of your hand.
If they are still choking:
4. Make a fist, and give five inward and upward a abdominal thrusts in a "J like" motion.

21/04/2024

What is a HMS Helideck Monitoring System?🚁🚁🚁

Offshore helicopter operations are carried out in hostile environments. The Helideck Monitoring System HMS is designed to measure helideck motion during helicopter pre-landing and on-deck operations to improve flight and passenger safety in these conditions. The system monitors the helideck's acceleration, heave velocity, inclination, roll, and pitch together with meteorological data in real-time.

The HMS needs to be fully compliant with the prevailing Web access recommendations and guidelines issued by the Civil Aviation Authorities. The HMS needs to be compliant with the CAP 437 from September 2018 and accompanying Helideck Certification Agency (HCA) document revision 9b. This implies that the helideck must be equipped with repeater lights connected to the HMS system to indicate to the pilot whether the on-deck or pre-landing conditions are within the landing limits or not.

The HMS will calculate and present the Motion Severity Index (MSI) and Wind Severity Index (WSI) data together with significant heave rate (SHR), inclination, roll, and pitch of the helideck in real-time. The system will precisely monitor vessel motion and accelerations at the helideck center. These data are transferred to the HMS Processing Unit that processes helideck motion data together with MSI and WSI figures to determine whether the helicopter operation is safe or not.

Both onboard and onshore personnel can monitor helideck movements and meteorological data in real-time and see the same operational picture in order to increase operational awareness. Cyber security is an integral part of the system. With the cloud-based service, storage of helideck data for periods exceeding a month is included.

💡Did you know that ShoreConnection International's CAA certified helideck monitoring system HMS-900 not only provides compliance with all international helideck safety regulations, but also has an eco-friendly twist:

-it minimizes unnecessary helicopter flights. 🌍
-companies save resources on fuel costs, maintenance, and operational downtime. 💰
-it significantly reduces carbon emissions and contributes to a greener future. 🌱

Its reliability and compliance lead to sustained operational efficiency with both economic and environmental benefits. 📈

Sources: KONGSBERG HMS 300 Helideck Monitoring System.
Video credits: ShoreConnection International's HMS-900

ARE YOU AN INSPECTION BODY OR A CONFORMITY ASSESSMENT BODY?QHSE Conseil WILL BE PLEASED TO PROVIDE ASSISTANCE AND CONSUL...
03/03/2024

ARE YOU AN INSPECTION BODY OR A CONFORMITY ASSESSMENT BODY?

QHSE Conseil WILL BE PLEASED TO PROVIDE ASSISTANCE AND CONSULTANCY TOWARDS GAINING STATE ACCREDITATION IN ACCORDANCE WITH THE ISO INTERNATIONAL STANDARD :

ISO/IEC 17020:2012 Conformity Assessment - Requirements for the Operation of Various Types of Bodies Performing Inspection.

We will be pleased to assist you in ensuring the compliance of your Inspection Body Management System with the listed below Standard Sections requirements:
4. General Requirements
5. Structural Requirements
6. Resource Rquirements
7. Process Requirements
8. Management System Requirements

We take into consideration both International Best Practices and Local requirements in the implementation process!

For more information, please do not hesitate to contact us and we will be pleased to answer all your questions and to assist you towards the compliance with the Standard and the obtention of the State Accreditation.

hashtag hashtag hashtag hashtag hashtag hashtag hashtag hashtag hashtag hashtag hashtag

ISO/IEC 17025 : 2017 General Requirements for the Competence of Testing and calibration laboratories.ISO/IEC 17025, Gene...
05/02/2024

ISO/IEC 17025 : 2017 General Requirements for the Competence of Testing and calibration laboratories.

ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories, is the international reference for testing and calibration laboratories wanting to demonstrate their capacity to deliver reliable results.

Who is ISO/IEC 17025 for ?
ISO/IEC 17025 is useful for any organization that performs testing, sampling or calibration and wants reliable results. This includes all types of laboratories, whether they be owned and operated by government, industry or, in fact, any other organization. The standard is also useful to universities, research centres, governments, regulators, inspection bodies, product certification organizations and other conformity assessment bodies with the need to do testing, sampling or calibration.

What benefits will it bring to my business or organization?
ISO/IEC 17025 enables laboratories to demonstrate that they operate competently and generate valid results, thereby promoting confidence in their work both nationally and around the world. It also helps facilitate cooperation between laboratories and other bodies by generating wider acceptance of results between countries. Test reports and certificates can be accepted from one country to another without the need for further testing, which, in turn, improves international trade.

The new ISO/IEC 17025:2017 Structure chapters:
1. Scope
2. Normative references
3. Terms and definitions
4. General requirements
5. Structural requirements
6. Resource requirements
7. Process requirements
8. Management system requirements
orgorg

27/08/2023

Donning and Doffing FPE Fire Protection Equipment and SCBA.

Credits: Tad Buckingham.

19/08/2023

Experience Wind Power Offshore in 360°

Get on board and enjoy a 360° flight to an offshore wind power plant. Learn about wind turbines with Direct Drive technology and service solutions such as the SOV - the Service Operation Vessel - that Siemens provides to keep offshore wind turbines running efficiently. That's how Siemens’ transforms offshore wind into an asset.

Source: siemens.com

08/05/2023

طريقة اطفاء ابار النفط و الغاز المشتعلة.
Oil and gas burning well extinguishing technique.

06/05/2023

For some oil and gas workers, travelling offshore is the norm.

But many others have never had the opportunity to work offshore, or even travelled in a helicopter before.

With this amazing video footage from Neptune Energy, now you can experience a trip offshore for yourself!

Video credits: Lee Boulter, offshore production supervisor Neptune Energy UK.

©Neptune Energy

What are the must-have certifications for an oil & gas worker?With the increasing levels of competition in the oil and g...
03/05/2023

What are the must-have certifications for an oil & gas worker?

With the increasing levels of competition in the oil and gas industry, and let's not forget its high-consequence environment, it is becoming increasingly important for workers to stand out from the crowd.

Professional training experience alone might not be enough to show a worker's ability to not just work efficiently in this high-risk environment but also adhere to industry standards and regulations.

Hence, being certified plays a very key role.

Professional certifications are important for career development and add credibility to your expertise. While continuing education and certification programs require an investment of time and resources, they also help provide recognition for your specialized knowledge or skill set.

What are the must-have certifications for an oil & gas worker? Read more to find out https://getmanup.co/blog/certifications-you-must-have-as-an-oil-and-gas-professional

Source and credits: Manup.

03/05/2023

Workforce Solution that Simplifies the Processes By Which Energy Companies Source and Manage Skilled Professionals

Hydrogen Sulphide in the Oil & Gas Industry: Impacts, Traits & Protection.Hydrogen Sulphide (H2S) is a highly toxic gas ...
30/04/2023

Hydrogen Sulphide in the Oil & Gas Industry: Impacts, Traits & Protection.

Hydrogen Sulphide (H2S) is a highly toxic gas that is one of the most commonly occurring substances in the oil and gas industry.

From industrial processing of natural gas, to desulphurization of crude oil, to storage and transport, H2S can arise suddenly in lethal concentrations that are undetectable to the human nose. Employees can stay safe by understanding the effects of H2S at rising exposure levels and tips for proper measurement and protection.

The Impacts of H2S Exposure on the Body.
What Happens as H2S Levels Rise?
H2S Exposure Protection Tips.

©Drager

. عيد مبارك و تقبل الله منا و منكم.QHSE Conseil wishes you Eid Mubarak and May ALLAH THE MOST MERCIFUL Accept from us an...
21/04/2023

. عيد مبارك و تقبل الله منا و منكم.
QHSE Conseil wishes you Eid Mubarak and May ALLAH THE MOST MERCIFUL Accept from us and you and Shower all of us with Forgiveness and Blessings !

Address

CYBER-PARC DJERBA 7 Boulevard De L'Environnement/Houmt Souk 4180 DJERBA/
Djerba

Alerts

Be the first to know and let us send you an email when QHSE Conseil posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to QHSE Conseil:

Share