CCFireTester Taiwan

29/06/2023

Changing FST951-Notifier head on 10M height-Demo of Detector Removal Tool-CCFireTester-CC03

19/04/2023

21/03/2023

Is it worth risking the safety of you or your staff to climb to a high place or bear the cost of renting a scissor lift?
Replacing a detector head is just a "one pole thing."
However, detector removal tools are usually easy for removing the cover but difficult for reinstalling it.

Therefore, we spent six months redesigning a new version that solves this problem and improved it with 3 key features below:
1. Turning both sides tightens the tool's claws. You wouldn't have to stuck in and push up the tool just to have enough friction to twist off/in the detector head, resulting in the T-bar ceiling being lifted up.
2. Fall-resistant function by viscosity-adjustable sticky pad which can avoid the detector from falling off while operating, safe and helpful especially when the detector is on a high space.
3. Smaller volume blocks the target less, aiming with a clearer view.

With continuously improving, we aim to provide a good detector removal tool that brings you the following benefits:

COSTS LESS
- Less scissor lift or scaffold renting for just to replace a detector head.
SAFER
- No one has to take the risk to reach a detector head at a high place by hand.
FASTER & EASIER
- Make your fire alarm inspection into a "one pole thing".

We are CCFireTester from Taiwan, specialized in fire alarm inspection tools R&D. If you are interested in our products, please don’t hesitate to contact us or learn more from the link：CCFireTester.com/products/Detector-Removal-Tool

PS. We don't send many ads, so in case you couldn't find us but might need our products in the future, please consider following our fan page or sending us a message to keep a record.

18/01/2023

Make your FIRE INSPECTION EASIER！
Any other detector or situation you want me to show you?

17/01/2023

Want video of grabbing other detectors?
Comment/DM us and we'll show you.

23/12/2022

New Detector Removal Tool LAUNCHED!

Thank you for your patience and giving us sufficient time for researching and developing. We are excited to share our new tool today.

Click the link and take a look at our precious work!
https://bit.ly/3GbMwg0

21/12/2022

Brand new Detector Removal Tool Coming Soon!
New Design Preview No.3: Sticks with threads.

To make sure the sticks are available for universal use. We used to use magnet pads to adjust the grabbing height, in order to match the thickness of most detector covers and not to bump into the base.

The new version shows up with the sticks with threads. You are able to adjust the grabbing height according to detector covers’ thickness.
Here’s the benefits. Come take a look!
1. Bye to the magnet pads which might slip while replacing.
2. Can adjust to any height, detector cover stays on the tool steadily.
3. Screw nut provided, no worries of losing the sticks.
4. Available for larger and thicker detectors, available for most detectors.
5. Available for huge light bulb changes.

This is the last Preview. Get Ready for our LAUNCH announcement!
See you again soon!

20/12/2022

Brand new Detector Removal Tool Coming Soon!
New Design Preview No.2🤩: Adjustable round part for free angle

The detector removal tool is designed for no climbing. It is crucial to us that it can be used for most detectors, no matter what sizes of them or where they are installed.

Before our Tool can be used in free-angle after removing the plastic part. The new version is even better! Can’t wait to share what the round part can do!
1. Screw the part in or out to control the Tool’s bendable angle.
2. Round part unable to remove, no worries for losing components.

We invite you to take a look at this sweet design after the official launch. Stay tuned for our next highlight preview on the way!

19/12/2022

Brand new Detector Removal Tool Coming Soon!
New Design Preview No.1🤩: The special-made fall-resistant pad.

We used to have the magnet-cotton pad to provide friction and protect the detectors while grabbing. For the new version, we changed it into a special-made sticky pad.

Come check why it’s a brilliant innovation!
1. Non-slip. Detectors won’t fall off when removing.
2. Customized size. Stick right on the Tool. No worries of losing the magnets as before.
3. 2mm thick. The just-right thickness provides a great grabbing experience.
4. Make your own sticky rate. Really sticky after washing, and put some tissue on the top for less friction.

The introduction will stop here today. More new design preview behind!
Welcome to follow our page. Can’t wait to see you again😍

24/11/2022

Happy Thanksgiving! We are sharing our two good news!

First, a 4-20ft Extension Pole is now available. We made the volume smaller for a lower delivery fee and better carrying experience but did not compromise on any of its practicality.

Second, we will have a new version of the Detector Removal Tool out in the near future. The first version is currently out of stock as it is our best selling product.

Standing with you, we are proud to be a member in the fire safety industry. As we hope to make all your work done easier and faster but also safer, we always made all efforts in designing better equipment.

Wishing you and your loved ones a joyous holiday!