Berg Compliance Solutions, LLC

Call Directions Website Contact the business

Berg Compliance Solutions, LLC No guesswork. No overwhelm. No surprises. We believe safety is more than a requirement.

We help Texas manufacturers achieve guaranteed environmental, health and safety — while turning safety into a competitive advantage that wins contracts, attracts talent, and keeps production running without disruptions. Berg Compliance Solutions has been helping Texas manufacturers eliminate the burden of OSHA, EPA, and TCEQ compliance — and transform safety into a true competitive advantage since 2003. Founded by industry veteran Russell Carr, our mission is to protect people, strengthen operations, and help manufacturers grow without the fear of fines, shutdowns, or failed customer audits. With decades of hands-on experience in hazardous industries, regulatory inspections, and real-world manufacturing environments, we know exactly what it takes to build a safe, compliant, and resilient operation. Through our Factory-Safe™ partnership program and Safety-Trac™ technology, we become your dedicated Environmental, Health and Safety department — developing your programs, training your people, managing inspections, and hazardous waste management, guaranteeing full compliance within 12 months. It’s a driver of better performance, stronger contracts, higher quality, and long-term operational resilience. Whether you’re facing rapid growth, struggling with turnover, preparing for audits, or simply want peace of mind, Berg Compliance Solutions is here to protect your workforce, your reputation, and your bottom line — so you can focus on building a thriving manufacturing business. Contact us today to get started: https://bes-corp.com/book-free-consultation/

Most manufacturers see safety as a line item to minimize.We see it as a competitive edge.Our founder, Russell Carr, lear...
10/06/2026

Most manufacturers see safety as a line item to minimize.

We see it as a competitive edge.

Our founder, Russell Carr, learned that the hard way. Before starting this company, he owned an energy services business that got a surprise OSHA inspection. It failed. He wrote a check to the U.S. Department of Treasury and felt embarrassed, not angry — embarrassed that he hadn't kept up, and ashamed that he'd put his own employees at risk without knowing it.

That experience is why we started Berg Compliance Solutions in 2013. We help small and mid-sized Texas manufacturers and general contractors build real OSHA and EPA compliance programs, not a 200-page binder that sits on a shelf, but a system that actually gets used.

Here's what we've seen over and over: safety done right isn't a cost center. It wins contracts that require a documented program. It helps attract and keep good employees. It brings insurance costs down instead of up.

Cost center, or competitive advantage? We'd genuinely like to know where you land.

05/12/2026

Is your facility ready for an OSHA inspection, or do you just hope it is?

There's a difference. And most manufacturers don't find out which one until an inspector is already at the door.

Here are the 4 steps every manufacturer should be working on right now:

1. Inspect your own facility. Identify and correct physical health and safety hazards proactively, before someone else does it for you.

2. Confirm your safety program is complete and current. It needs to cover all general industry OSHA standards. If you haven't reviewed it recently, that's worth knowing.

3. Get your safety documents and records in one place. When an inspector asks, you need to be able to hand things over immediately, not scramble.

4. Develop a formal plan for managing the inspection process. Write it down. Know who does what. Don't leave it to chance.

Preparation is manageable. What's not manageable is finding out you weren't prepared after the fact.

Want to know where your facility actually stands? Our free OSHA Inspection Readiness Assessment takes about 5 minutes and gives you a clear picture of your compliance gaps.

https://bergcompliancesolutions.outgrow.us/osha-inspection-readiness-and-compliance-risk-calculator

OSHA compliance isn't hard for small manufacturers because they don't care about safety.It's hard because the deck is st...
05/11/2026

OSHA compliance isn't hard for small manufacturers because they don't care about safety.

It's hard because the deck is stacked against them from the start.

Limited budgets. No dedicated safety staff. Regulations that span thousands of pages and change regularly. Production deadlines that don't stop for training days. And no one internally who knows enough to flag what's actually missing.

We've worked with small manufacturers since 2003 and we've seen these same struggles play out over and over again. The companies that get hit hardest by OSHA citations are usually the ones trying their best with the resources they have.

The good news is that understanding why compliance is hard is the first step toward actually fixing it.

We broke down the 10 most common reasons here: https://bes-corp.com/10-reasons-why-osha-compliance-is-so-difficult-for-small-manufacturers/

Most manufacturers believe they're reasonably prepared for a surprise OSHA inspection.There's a manual on the shelf. Som...
05/05/2026

Most manufacturers believe they're reasonably prepared for a surprise OSHA inspection.

There's a manual on the shelf. Someone on staff is handling safety. Training has been completed. The box, as far as leadership is concerned, has been checked.

But that confidence often falls apart the moment an inspector walks through the door.

The four mistakes we see most often aren't about negligence. They're about assumptions that sound reasonable and don't hold up under OSHA's actual requirements. A safety responsibility stacked onto someone already wearing five hats. An insurance carrier mistaken for a compliance program. A manual that nobody's actually using. Generic training that doesn't come close to what OSHA requires.

Any one of these can turn a routine inspection into a very expensive day.

Read more here: https://bes-corp.com/what-most-manufacturers-get-wrong-about-osha-inspection-readiness/

A plant manager walks in with a thick safety binder and tells the OSHA inspector, "We've got it covered. Operations hand...
04/30/2026

A plant manager walks in with a thick safety binder and tells the OSHA inspector, "We've got it covered. Operations handles all that."

Three weeks later, OSHA shows up unannounced. The penalty runs over $80,000.

It wasn't an operations failure. It was a leadership failure.

Our latest article breaks down why this keeps happening, and what OSHA inspectors are actually looking for when they walk in.

https://bes-corp.com/why-safety-compliance-is-a-leadership-decision-not-an-operations-one/

Have you seen this play out in your facility?

Hiring a full-time safety manager sounds like the answer.But there's a lot more to that decision than most manufacturers...
04/30/2026

Hiring a full-time safety manager sounds like the answer.

But there's a lot more to that decision than most manufacturers realize.

Before you make that move, there are five key factors worth thinking through carefully:

- Do your operations and headcount actually warrant a full-time hire?
- Can you afford it? (The salary range may surprise you.)
- Are you set up to properly vet and select the right person?
- Can you actually evaluate whether they're doing the job once they're in the door?
- Are you prepared to fully support them? Because without that, even the right person won't last.

The truth is, a lot of companies hire a safety manager before they're ready and don't find out until something goes wrong.

We break down all five factors in detail here:

https://bes-corp.com/should-you-hire-a-full-time-safety-manager/

There's a question that shows up in almost every RFP a manufacturer responds to.It's not about price. It's not about lea...
04/29/2026

There's a question that shows up in almost every RFP a manufacturer responds to.

It's not about price. It's not about lead time.

It's about safety.

Customers and prime contractors want to know what your safety record looks like before they decide whether you even make the short list. Incident rates, OSHA records, written programs, training documentation. It's all part of the evaluation now.

And here's what we've seen after working with manufacturers for over 30 years. The ones who have a real safety program in place, documented and actually being followed, move through that part of the process without breaking a sweat. The ones who don't are scrambling to pull something together at the last minute. Or worse, they get screened out before they ever get a shot at the work.

The truth is, safety compliance used to feel like a cost center. Something you had to do. Now it's showing up directly in the sales process. The manufacturers who figured that out are using it to win business their competitors can't touch.

A solid safety program protects your people. It keeps you in line with OSHA and EPA requirements. And it opens doors that stay closed for companies who haven't done the work.

Is your safety program working for your business, or just sitting on a shelf?

Today is World Day for Safety and Health at Work.For us, it's every day.Every worker deserves to go home safe. Full stop...
04/28/2026

Today is World Day for Safety and Health at Work.

For us, it's every day.

Every worker deserves to go home safe. Full stop.

To the manufacturers who take that seriously... we see you. Keep going.

Address

11615 Angus Road
Austin, TX
78759

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

(512) 457-0374

Website

Alerts

Be the first to know and let us send you an email when Berg Compliance Solutions, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Berg Compliance Solutions, LLC:

Shortcuts

Sponsored

Share