Solar Paths Inc.

Solar Paths Inc. Solar Inventions Solar Cars Solar Lens Cordes Lens We are a company founded by the co-inventor of the Cordes Lens.

We use these Cordes Lens' to create solar collectors which do not use the photovoltaics, instead a two phase steam to electricity generator is used which boosts efficiency over photovoltaics. The efficiency of our two phase steam to electricity generator is 44% when using evacuated tubes and 46% when using solar rotating boiler.

Although school is top priority for me as the founder of Solar Paths, Inc. to provide capital for the company I am seeki...
01/24/2018

Although school is top priority for me as the founder of Solar Paths, Inc. to provide capital for the company I am seeking capital through alternate sources now and am currently authoring a book to be released within 2 months. If the book does well, we expect to have a prototype of our stationary solar capture device made within 2 years and our mobile trailer solar capture device made within 4.

The two products which Solar Paths, Inc. is currently working on is a trailer which supplies electricity to a car by use...
01/17/2018

The two products which Solar Paths, Inc. is currently working on is a trailer which supplies electricity to a car by use of Fresnel lens which focuses solar energy on a molten salt generator which can also use vegetable oil as a burner source, and a non-mobile platform of the same variety with more lenses.

01/12/2018

A capital investor has been found and Solar Paths, Inc. will go forward with the first protoype of the TFFL (Thin Film Fresnel Lens) solar amplifier/generator. Estimated time to delivery is 8 months.

01/09/2018

The Thin Film Fresnel lens design is basically the same as the Fresnel lenses found in projection televisions, except the plastic is a bit thinner. The lens does not have to support itself fully as it has a frame, because of this you don't have to use as much plastic and thus can gain in light throughput. I will post a 3D image of the final product soon.

01/05/2018

Neil glued the plastic together, but it was too thick. The water did leak a bit, but balancing it to form a lens was impossible. If we did this on Pluto it would have worked a bit better in terms of aiming light. The plastic was so thick however that the grass under it died in 3 days. In the future, all water designs are out and an all plastic Fresnel lens is in. This lens is thinner than the Fresnel lenses found in Projection TVs.

01/05/2018

Solar Paths, Inc. is currently in sebatical and will re-emerge when school is finished in 1 year.

08/27/2017

Solar Paths Inc. will be up and running just as soon as I can get around $1500 together which is what the first lens will cost.

05/17/2017

Solar energy is where it's at. Converting solar energy into a useable energy source has failed mankind. Let's fix this.

04/18/2017

Solar Paths has undergone a change of plan. No longer are we going to implement a water and plastic design. Furthermore we are using a plastic only design and also using Fresnel lenses. Because the need for structural integrity at high dimensions for these lenses we will use a circular Fresnel design of 1 meter in diameter and use only plastic.

10/29/2016

Solar Paths inc. would like to wish everyone a safe and pleasant holidays however due to corporate sabotage we will have nothing new to add for quite some time with no CAM support, investors, employees or facility.

09/08/2016

We are out of operation as we have no place of business and we have no CAM support to make the new lens structure

Address

Batavia, IL
80205

Website

Alerts

Be the first to know and let us send you an email when Solar Paths Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Solar Paths Inc.:

Shortcuts

Share

Category