Got Mold NC

Directions Website

Got Mold NC Got Mold NC. Identify. Remove. Prevent. Got Mold NC is your NC Certified Expert Analyst on The Crystal Coast for air quality assessments and mold treatment.

Before you approve “replace it all,” ask what the measurements show.Uneven cooling or persistent humidity can leave you ...
10/16/2026

Before you approve “replace it all,” ask what the measurements show.

Uneven cooling or persistent humidity can leave you considering an entirely new system. Documented testing adds evidence to that conversation.

Our Infiltration & Duct Leakage Testing measures leakage so you have actual results to discuss with your HVAC contractor.

At Got Mold NC, we connect those findings with property conditions and mold-testing results when relevant. That helps guide a more informed plan.

A major expense deserves a clear explanation. Start with testing you can put on the table!

🏢 Monday – Thursday: 9:00 AM – 5:00 PM
📍 Eastern NC • Ocracoke
✉️ [email protected]

You don’t need a stronger cleaner every time. Sometimes you need better information.If discoloration keeps returning aro...
10/14/2026

You don’t need a stronger cleaner every time. Sometimes you need better information.

If discoloration keeps returning around the shower, repeating the same cleaning routine leaves an important question unanswered: What are you actually treating?

Testing helps identify what is present in the sampled material. Got Mold NC analyzes the laboratory results alongside property conditions to guide what comes next.

We want your plan to address the concern with a clear reason behind it.

Before buying another bottle, let’s find out more.

🏢 Monday – Thursday: 9:00 AM – 5:00 PM
📍 Eastern NC • Ocracoke
✉️ [email protected]

Some of our most valued business relationships started with a simple introduction. We’re looking forward to a few more t...
10/13/2026

Some of our most valued business relationships started with a simple introduction. We’re looking forward to a few more this Thursday.

Got Mold NC is sponsoring the b**r and w**e for Business After Hours with the Carteret County Chamber and Friends of the NC Maritime Museum on October 15.

Meet us at the Harvey W. Smith Watercraft Center from 5:30–7:00 p.m. There will be charcuterie, door prizes and plenty to talk about in a waterfront space dedicated to Beaufort’s boatbuilding traditions!

That property question doesn’t have to stay on your “I’ll get to it” list.Got Mold NC is returning to Ocracoke October 2...
10/13/2026

That property question doesn’t have to stay on your “I’ll get to it” list.

Got Mold NC is returning to Ocracoke October 22–23, and we’re scheduling time with island property owners during our visit.

Maybe you have something specific you want to discuss. Maybe you’re unsure whether it warrants a closer look. Either way, you can start by telling us what’s on your mind. Our testing and building-science experience help us ask useful questions rather than jump to conclusions.

Contact us today to discuss your Ocracoke property and arrange a time. We’re already making the trip. Let’s connect while we’re there!

🏢 Monday – Thursday: 9:00 AM – 5:00 PM
📍 Eastern NC • Ocracoke
✉️ [email protected]

You changed the filter. The musty smell didn’t get the memo.A fresh filter is good maintenance. But an odor that keeps r...
10/11/2026

You changed the filter. The musty smell didn’t get the memo.

A fresh filter is good maintenance. But an odor that keeps returning deserves more than another replacement.

The buildup here does not prove mold is present. Air testing helps us investigate that concern with information beyond what we can see or smell.

Got Mold NC collects samples for an accredited third-party laboratory. We analyze the findings alongside conditions in the property to guide the next steps.

If the concern outlasts the filter change, let’s find out more!

🏢 Monday – Thursday: 9:00 AM – 5:00 PM
📍 Eastern NC • Ocracoke
✉️ [email protected]

Mold is rarely the first problem. It is the symptom. Leaks, trapped humidity, poor airflow, crawlspace moisture, and HVA...
10/10/2026

Mold is rarely the first problem. It is the symptom. Leaks, trapped humidity, poor airflow, crawlspace moisture, and HVAC contamination often create the conditions long before surface growth appears.

Got Mold NC helps property owners move past guessing with lab-backed testing, strategic solutions, and clear next steps.

🏢 Monday – Thursday: 9:00 AM – 5:00 PM
📍 Eastern NC • Ocracoke
✉️ [email protected]

Where you notice the problem and where the conditions started are not always the same conversation.Mold spores are micro...
10/09/2026

Where you notice the problem and where the conditions started are not always the same conversation.

Mold spores are microscopic. They move through indoor air, which means a property can have an environmental concern without giving you one obvious spot to point at. That is why we test!

Air quality testing gives us scientific data about what was identified and how much was detected. Then we match those findings against the building itself; HVAC, airflow, moisture, materials, humidity, and the systems connecting one part of the property to another.

🏢 Monday – Thursday: 9:00 AM – 5:00 PM
📍 Eastern NC • Ocracoke
✉️ [email protected]

You don’t need to diagnose the cabinet before contacting us. “That doesn’t look right” is enough to start a conversation...
10/08/2026

You don’t need to diagnose the cabinet before contacting us. “That doesn’t look right” is enough to start a conversation.

The staining and spotting here warrant questions. A photograph cannot confirm what the material is or explain how the condition developed.

We help turn that uncertainty into a practical next step. Surface testing can help identify sampled material. A property assessment can investigate moisture and contributing conditions.

Tell us what you’ve noticed and whether anything has changed. We’ll help you choose the service that fits the concern!

🏢 Monday – Thursday: 9:00 AM – 5:00 PM
📍 Eastern NC • Ocracoke
✉️ [email protected]

Address

412 Front Street
Beaufort, NC
28516

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm

Website

, ,

Alerts

Be the first to know and let us send you an email when Got Mold NC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category