Kustom Karr

07/29/2019

New chrome grill for the 51 Chevy.

07/27/2019

Sorry it’s been so long but here’s a few more pictures of the 1965 Ford F 100.

04/29/2019

This is the 1965 F-100 . Put some expandable foam in between the roof brace and the top of the cab made a big difference really firmed that sheet metal up on the top. Made a big difference when blocking out the roof.

And the floorboards had quite a bit of pitting in them luckily just underneath where the floor mats would be. The rest of the cab rust wise was excellent. Dennis Carpenter makes a patch panel for the floor so I took out the bad areas and replaced only what I had to.

04/29/2019

This is a 1968 Firebird Original Paint way too much time in the sun. Normally would not polish this because there is no clearcoat but since it gets to stay in the garage most of it’s life from now on I decided to try and save the paint. It’s not perfect it has thin areas but it was thin already but it brought a lot of the color and a little bit of reflection back to the paint. And the fact that it’s 51 years old, it still looks pretty good.

04/28/2019

Hello everyone sorry it takes me so long to get photos on here this was a while ago but all the bodywork is done and everything is into primer. This is the first coat DP 90 epoxy primer and then follow that up with couple coats of K 38 catalyzed primer. Working on assembling the chassis now will add some more photos later.

04/08/2019

Good morning there was a question about the adjustable body cart. Here’s the information that you need. Plus free shipping it has been a great cart. very easy to move around or load in the trailer 8 inch wheels works great.

04/07/2019

Hello everyone sorry that it has been so long since I have posted anything on my page. Here’s a few photos of the 1965 Ford F100.

We decided to install a NV 4500 five speed transmission. Advance adapters makes a very nice kit to adapt this to the original bell housing. So we can use all the original bell housing and clutch pedal assembly etc. this will make A big difference cruising down the highway. Much easier on the engine.

We will also be adding Power steering and air-conditioning. And Billet specialties serpentine belt kit for the FE 390. Very nice kit got everything in anodized black and going to run natural finish on all the accessories not polished. And original air cleaner and gold valve covers.

10/14/2017

I just got the frame suspension parts core support fender wells battery tray back from the powder coater everything looks amazing. Special thanks to BILL at Ajax Sand Blasting and powder coating in Van Nuys California.

10/14/2017

10/09/2017

Hello everyone I got the Engine back to the shop and On close inspection it is even better than I had hoped for. The oil pan The timing chain cover all the Pulleys and brackets were sandblasted and powder coated. And Tom purchased a Factory style hardware kit for the Engine with all new bolts everything is CAD plated and all the pieces were painted separate and assembled looks amazing. Special thanks to Tom at FE specialties in Auburn California. If you go on Facebook FE specialties you can see a lot of other amazing things Tom has done. And also there should be a video of this 390 running when Tom was breaking it in and setting everything up just perfect.

10/08/2017

This is my 2005 Road King. I enjoy polishing it as much as I do riding it. I guess that is part of the job description :-)

10/08/2017

Hello everyone this is a 1963 SS convertible Impalla we did the color sand and rub on this several years ago beautiful car still looks great it's a local bishop car.