SLG Creative Solutions, LLC

11/21/2025

Love to see clips of the stuff we help make out there!

10.1K likes, 38 comments. “Big chip energy ⚡️”

08/14/2025

Dialing in our newest addition to the fleet of machines. Introducing the Boss LS3655.

A 36x52" bed size with 150watts of power to cut and engrave all our acrylic needs.

05/15/2025

Here is a custom reception desk we made last month for a new salon opening up in our area! MDF painted outside with melamine cabinets and a laminate top.

This thing was HEAVY, so we recommended some changes from the engineered drawing to keep the weight down for the next delivery.

04/09/2025

We made 10 of these monster towers a few months ago for an event client of ours. They are 1/2" plywood towers that we laminated in mirrored aluminum, with an 18" return, so balloons or flowers can be put in from the top.

This ended up being a rush project, so we pulled a few all nighters to get it done for the deadline. They looked amazing, and I bet even better when they pull off the protective film!

04/08/2025

Since acrylic is our specialty, we ended up helping out our favorite property manager and fixing their portable tub! This was made in a fully enclosed custom trailer and is totally suspended. When the trailer is parked and the tub is filled with water, the suspension lowers the tub to the ground and it then can be used.

There was a small leak from some previous cracks that we repaired, as well as the water fill ledge that broke off. Now it can get back on the road and back in business!

03/24/2025

Things we make on a weekly basis!

No matter what you want to showcase, whatever size or shape it is, we can fabricate and product it for you! Here are some custom sized clear acrylic cylinder cases for the opening of a new store.

10/29/2021

Check out our latest installation project for a new dispensary opening up!

01/24/2021

We installed these privacy barriers this weekend at one of our clients local offices. They wanted their patient's to have a private area where they will be drawing blood, so we went with frosted P95 acrylic that will still allow sunlight through and provide the privacy they were looking for.

01/21/2021

Here is one of our finished units of this Spinning Floor Kiosk display for a client of ours. All materials supplied, just SLG's labor to cut and fabricate the finished product!

01/13/2021

Just about finished with a simple 3/4"thk clear acrylic 32"x32" table top for a local client. This when it's all clean up, this will POP in their office!

01/13/2021

We've been moving into our new facility this past month and have expanded upon our capabilities.

-5000+ more sqft
-New CNC Router
-New Vertical Panel Saw
-New Edge Ba**er