Ultra Clean Technologies Corp.

Call Directions Website Contact the business

Ultra Clean Technologies Corp. We provide advanced contamination control solutions for hydraulic systems. Ultra Clean Technologies Corp.

From cleaning and sealing hoses to ensuring peak performance in industries like mining, oil & gas, construction, and agriculture, we help you keep operations running smoothly. was founded to provide the Fluid Power Industry a pro-active and reactive solution to contamination removal and control on mobile equipment and machinery. Since then, our products have been used in a variety of applications in diverse industries: from Chocolate Factories to race cars; Wineries and Toothpaste factories; Off-shore oil wells and even the military!

In an independent hose-cleanliness test, a 10-second air blow still left 52,827 particles 6 microns and larger per cc.Af...
10/20/2026

In an independent hose-cleanliness test, a 10-second air blow still left 52,827 particles 6 microns and larger per cc.

After Ultra Clean projectile cleaning?

511.

That’s over 99% fewer particles than the 10-second air blow in this test.

The takeaway is simple: blowing out a hose and cleaning the inner tube are not the same thing.

Contamination left behind after fabrication can travel with the replacement hose and enter the hydraulic system at installation. If compressed air is the last step in your process, it may be time to rethink what “clean” really means.

Cutting and crimping are not the last steps. Cleaning is.

See how Ultra Clean can help you build better contamination control into your hose fabrication process:
www.ultracleantech.com

McGill Hose & Coupling, Inc. says it “utilizes Ultra Clean Technologies on every hydraulic hose it fabricates” to help r...
10/20/2026

McGill Hose & Coupling, Inc. says it “utilizes Ultra Clean Technologies on every hydraulic hose it fabricates” to help remove foreign-object debris before it reaches hydraulic equipment. Their article explains how Ultra Clean projectile cleaning removes internal contamination from hose and tube assemblies as part of their fabrication process. McGill Hose and Coupling, Inc.

Established hose fabricators like McGill Hose understand that quality does not stop at cutting and crimping. By making Ultra Clean part of every hydraulic hose they fabricate, they are building contamination control into the process and delivering a higher standard to their customers. If cleaning is not part of your fabrication process, it may be time to ask what leading shops are doing differently.

See how McGill Hose uses Ultra Clean in its own operation:
https://www.mcgillhose.com/hydraulic-debris-can-reduce-the-life-of-your-equipment/

Friday Fact: The contamination you can’t see may be the contamination doing the most damage.Some electrohydraulic valve ...
10/16/2026

Friday Fact: The contamination you can’t see may be the contamination doing the most damage.

Some electrohydraulic valve clearances can be as small as 3–4 microns. Particles only a few microns in size can enter those tight clearances and contribute to sluggish operation, wear, and leakage in the hydraulic system.

That is why contamination control has to begin before installation. Clean the hose inner tube after fabrication, then keep it protected so microscopic debris does not become a hydraulic system problem later.

Small particles. Real consequences. Clean it. Seal it. Protect it.
Learn more at www.ultracleantech.com

Q&A: Can you wash and reuse an Ultra Clean projectile?No. Even when a used projectile looks clean after washing, it can ...
10/16/2026

Q&A: Can you wash and reuse an Ultra Clean projectile?

No. Even when a used projectile looks clean after washing, it can still retain microscopic contamination or moisture. Reusing it can introduce that contamination into the next hose inner tube and ultimately into the hydraulic system at installation.

A clean hose deserves a clean projectile. Use a fresh projectile for each cleaning cycle.
Learn more at www.ultracleantech.com

Wednesday Wisdom: Cleaning after cutting is important, but the process shouldn’t stop there. Crimping can create new met...
10/14/2026

Wednesday Wisdom: Cleaning after cutting is important, but the process shouldn’t stop there. Crimping can create new metal and plating debris that wasn't there when the hose was first cleaned. That means a hose that was clean after cutting may no longer be clean after crimping.
Cleaning again after crimping removes newly introduced contamination before installation, helping keep debris out of the hydraulic system.

Clean after cutting. Clean again after crimping.
Learn more at www.ultracleantech.com

Projectile size matters because the cleaning action depends on the fit.Ultra Clean projectiles are typically selected 20...
10/13/2026

Projectile size matters because the cleaning action depends on the fit.
Ultra Clean projectiles are typically selected 20–30% larger than the inner diameter of the hose, tube, or pipe being cleaned. That extra size allows the projectile to compress against the inner wall as it travels through, helping remove contamination left behind during fabrication.

Too small, and you may not get enough contact. The right size helps the projectile do the job it was designed to do.

Learn more at www.ultracleantech.com

1.2 seconds can make a big difference in the fabrication process.Ultra Clean’s Bench Mount Launcher is designed to keep ...
10/08/2026

1.2 seconds can make a big difference in the fabrication process.

Ultra Clean’s Bench Mount Launcher is designed to keep hose cleaning fast and convenient, so technicians can remove contamination without slowing production.
Positioned near the crimping machine, it helps make cleaning the inner tube a consistent step after cutting and crimping and before installation.
Keep production moving. Keep contamination out of the hydraulic system.

Learn more at www.ultracleantech.com
800.791.9111

Wednesday Wisdom: Don’t wait to clean the hose.Cutting can leave rubber dust and metal particles in the inner tube, and ...
10/07/2026

Wednesday Wisdom: Don’t wait to clean the hose.
Cutting can leave rubber dust and metal particles in the inner tube, and as the hose cools, that debris can become harder to remove.
Cleaning immediately after cutting helps remove contamination before it can remain in the hose and enter the hydraulic system at installation.

Clean it while the debris is fresh.

Learn more at www.ultracleantech.com

When contamination control becomes part of the standard, customers notice the difference.Brimfield Hardware Inc chose U...
10/07/2026

When contamination control becomes part of the standard, customers notice the difference.
Brimfield Hardware Inc chose Ultra Clean’s Clean Easy and Seal Easy systems to strengthen its hose fabrication process, remove contamination after cutting and crimping, and keep finished hose assemblies protected before installation.
That kind of process improvement helps deliver a cleaner, better-prepared hydraulic hose assembly and gives customers one more reason to trust the shop fabricating it.
We’re proud to see Ultra Clean products helping distributors raise the standard.

If you’re a hose distributor, make contamination control part of your standard too. Ask us how Clean Easy and Seal Easy can help improve your hose fabrication process and deliver cleaner, better-protected hydraulic hose assemblies to your customers.

www.ultracleantech.com
800.791.9111

Up to 80% of hydraulic system failures are attributed to contaminated oil.That makes one thing clear: what enters the hy...
10/05/2026

Up to 80% of hydraulic system failures are attributed to contaminated oil.
That makes one thing clear: what enters the hydraulic system with a replacement hose matters. Cutting and crimping can leave debris in the hose inner tube. If you don't remove that contamination before installation, it can enter the hydraulic system and contribute to wear, leaks, pressure loss, and downtime.

Ultra Clean Products removes that contamination before installation, so the replacement hose doesn't carry the problem into the hydraulic system.
Clean before installation. Protect the hydraulic system.

Learn more: 800.791.9111
www.ultracleantech.com

Address

1274 Highway 77
Bridgeton, NJ
08302

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+18007919111

Website

Alerts

Be the first to know and let us send you an email when Ultra Clean Technologies Corp. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Ultra Clean Technologies Corp.:

Shortcuts

Share