Drywall Repair Pros LLC

Drywall Repair Pros LLC Tired of chasing down flaky handymen? We make maintenance stress-free for property managers who need things done right the first time.

Professional, responsive, and always on schedule- we're not your cousin's side hustle. We're your go-to problem solvers.

09/05/2026

Always seal raw drywall voids before throwing hot mud in them! 🛠️

Spraying a quick pass of oil-based KILZ blocks dust, seals raw gypsum, and keeps setting compound from flash-drying before it can bond.

⁠

09/05/2026

How to Fix an Uneven Horizontal Drywall Butt-Joint (Without Rehanging)

When you're dealing with a horizontal butt-joint, zero ceiling clearance, and a top panel that sits inset, standard taping isn't going to cut it. In this video, I’m walking through the exact jobsite process to level out the gap, hot-rod setting mud, and match a Southwest skip-trowel texture so clean the homeowner won't even know where the repair started.

WHAT WE COVER:
• Pre-filling deep structural gaps with 3M spray adhesive & mesh tape
• Hot-rodding joint compound for fast sets and smooth feathering
• Planing an inset sheet level with 6-inch ceiling clearance
• Hand-skipping horizontal Southwest trowel texture
• Pole sanding with 220-grit, oil priming, and paint blending

TIMESTAMPS:
00:00 - Assess the Repair & Frame Clearance
00:40 - Hot-Rodding Joint Compound
02:00 - Pre-Filling the Gap
03:00 - 3M Spray Adhesive & Mesh Tape Hack
04:15 - The Fill Coat (Handling Inset Drywall)
05:25 - The Skim Coat (Planing the Wall Flat)
06:45 - Southwest Skip-Trowel Texture Match
07:35 - Pole Sanding, Oil Primer & Paint Blend (Final Reveal)

🎵 MUSIC CREDITS:
Track: Meta Sound Collection Licensed Audio

09/01/2026

Here’s why I don’t wait for my skim coat to dry before texturing. Applying skip trowel wet-on-wet keeps the edges soft and prevents harsh ridges, making patch matching so much easier!

Follow for more real-world drywall and home repair tips!

08/29/2026

Applying the 20-minute hot mud fill coat on a 2x3 ft patch repair. 🛠️
The key to a strong fill coat is keeping a soft angle on your knife. You want to leave about 1/8" to 3/16" of material directly over the seam rather than scraping it thin. In tight quarters next to the air return, pulling a 6-inch knife sideways gives you complete control without leaving massive ridges.
Best part? Cleaning up high spots after 10–15 minutes while the hot mud is firm (but not fully hardened) makes your final skim coat paper-thin and effortless.
Do you scrape your fill coats tight, or do you leave build over your tape? Let me know below! 👇

08/27/2026

Using a Hamilton Beach kitchen hand mixer to whip up 20-minute Westpac hot mud for a small patch job. 🛠️
I get a lot of heat in the comments for using a kitchen mixer on drywall mud, but for small, single-pan repairs, it works insanely well. The contra-rotating dual paddles blend the powder and water twice as fast as a standard drill paddle, leaving zero dry pockets or lumps at the bottom of the pan.
Would you ever run a kitchen mixer in your mud pan, or are you strictly mixing by hand? Drop your thoughts below! 👇

08/23/2026

The fastest way to tape a small drywall repair without wasting time waiting for mud to dry. 🛠️
Instead of bedding paper tape in mud, a quick pass of 3M Super 77 spray adhesive locks mesh tape down rock-solid. Standard factory mesh glue easily fails over dusty drywall, but the spray glue creates an instant, heavy-duty bond—even bridging open gaps without needing a pre-fill first.
Do you stick to paper tape, or would you try spray and mesh on small patches? Let me know below! 👇

08/21/2026

Hanging board and prepping seams for a fast 2x3 ft drywall repair. 🛠️
Here’s why I use 3M Super 77 spray adhesive with mesh tape: mesh relies on a light factory glue that lifts easily if there's dust on the drywall. A quick pass of spray adhesive locks it down completely and bridges small open gaps without needing a pre-fill.
Do you use mesh tape on small patches, or are you strictly paper? Let me know below! 👇

08/20/2026

Fixing a 2x3 ft water-damaged drywall patch next to an air return in under 2.5 hours. ⏱️
Instead of spending all day waiting for mud to dry, here is how to lock into a smooth rhythm and complete a flawless repair with zero wasted steps.
The main time-saver? Spraying 3M Super 77 over mesh tape. It locks the tape down solid without relying on a wet bedding coat, saving 20 to 30 minutes right off the bat.
Watch the full walkthrough to see:
• Prepping open studs & locking down mesh with spray adhesive
• Mixing 20-minute Westpac quick-set mud with a double-paddle mixer
• Applying the fill coat & pulling tight over tight angles
• Skimming with all-purpose mud & matching a Southwest skip trowel texture
Total time from bare studs to a finished texture: 2.5 to 3 hours.
Would you try the spray-and-mesh setup on your next patch, or are you strictly paper tape? Drop your go-to patch method in the comments below! 👇

08/18/2026

Putting a viewer’s jobsite trick to the test! 🧪

Someone in the comments suggested applying a light coat of spray adhesive to lock mesh tape down flat before mudding—instead of embedding it in hot mix or fighting dry factory tack.

Here is how the test went and whether this hack actually creates a solid substrate or just messes up your mud bond.

What’s your go-to for mesh repairs—factory stick, hot mix embed, or something else? Drop your method below! 👇

08/17/2026

Don't force drywall over proud joist hangers or uneven ceiling framing.

If your framing isn't sitting on a completely flat plane, sinking drywall screws into it will bow the sheet, snap the core, or guarantee a cracked seam down the road.

Here’s how to shim out the low spots on the fly so your ceiling board stays completely flat before taping.

Address

1442 Flint Way
Chino Valley, AZ
86323

Opening Hours

Monday 8:30am - 4:30pm
Tuesday 8:30am - 4:30pm
Wednesday 8:30am - 4:30pm
Thursday 8:30am - 4:30pm
Friday 8:30am - 4:30pm

Telephone

+19285335622

Website

Alerts

Be the first to know and let us send you an email when Drywall Repair Pros LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Drywall Repair Pros LLC:

Shortcuts

Share

Category