Eryn The Mixer Fixer

Eryn The Mixer Fixer I fix and restore modern and vintage KitchenAids in the greater Cleveland Ohio area.

Two 8 Qt commercials and a Pro 5 plus, all fixed today.
12/12/2025

Two 8 Qt commercials and a Pro 5 plus, all fixed today.

Don’t forget to get that broken KitchenAid fixed before the holidays! Even catastrophic fails like this - the gearcase c...
09/12/2025

Don’t forget to get that broken KitchenAid fixed before the holidays! Even catastrophic fails like this - the gearcase crecked and everything in it ground up- can be cheaper to repair than buying a new one!

A K5A with a new cord and replaced speed lever, and an Ultra Power that just needed regreasing.I use a couple of rubber ...
09/01/2025

A K5A with a new cord and replaced speed lever, and an Ultra Power that just needed regreasing.
I use a couple of rubber cylinder straps screwed to a piece of wood as a cradle so I don’t scratch the tops.

Finished two today. The Professional 6 had failed catastrophically and has had a near complete insides-replacement/trans...
08/10/2025

Finished two today. The Professional 6 had failed catastrophically and has had a near complete insides-replacement/transplant. They are ready to go home and make some cookies!

A KSM90 that needed a new cord, new feet, and new grease.
06/09/2025

A KSM90 that needed a new cord, new feet, and new grease.

05/25/2025

Regreased and fixed most of the issues with this classic early 1980s cream K45SS (still Hobart). It fought me every step of the way - I had to use a heat gun to loosen several screws!
The customer wanted to keep costs down so it does still have a little chug from worn bearings.

I finally finished restoring the ancient K5A (white). I've got two modern mixers to repair, and then I can start on rest...
05/10/2025

I finally finished restoring the ancient K5A (white). I've got two modern mixers to repair, and then I can start on restoring this (insert adjective based on how you feel about avocado green appliances) avocado green K45A in beautiful condition. I usually get modern attachment hub covers for my clients because it is so hard to pry off the old kind.

And just cleared my backlog finally with this extremely well-loved professional 600
03/09/2025

And just cleared my backlog finally with this extremely well-loved professional 600

Just finished a restoration of this K45SS early solid state from the 1980s. I love the red trim band.
03/09/2025

Just finished a restoration of this K45SS early solid state from the 1980s. I love the red trim band.

When I replace or clean a worm gear in a tower assembly, I use my late father’s bench vise while I hammer out the pin.
03/02/2025

When I replace or clean a worm gear in a tower assembly, I use my late father’s bench vise while I hammer out the pin.

Address

Cleveland Heights, OH
44121

Website

Alerts

Be the first to know and let us send you an email when Eryn The Mixer Fixer posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share