Resco Plastics, Inc.

03/06/2026

Installation date documentation we'll see how long it takes for that bar to wear a groove into the plastic lumber or destroy the guides

02/25/2026

5 ft each direction per cycle, four cycles per board, approximately 120 boards per day

02/24/2026

Since they don't make it we had to

02/24/2026

Do-It-Yourself air clutch for motor

02/24/2026

So we share a yard with a trucking company and the scale in our plastics wash line runs 24/7 and I just noticed this morning our neighbors get pretty active well before we do I mean that was always obvious but now the sensors show it completely on accident. It also shows on how well completely saturated ground transfers the shock waves from the trucks rolling by

02/24/2026

Our plastic lumber is 100% recycled HDPE. wears well and is easy to machine. Also by a

02/23/2026

We've just reached 500 followers! Thank you for continuing support. We could never have made it without each one of you. 🙏🤗🎉
And that being said it's important for us all to remember that recycling is not a mission that is undertaken by one!
But each and every one of us count!

02/18/2026

As you can see Maxituf is some of the toughest stuff around wears well relatively inexpensive and we recycle it

02/12/2026

This gorgeous Boat is about to be outfitted with a new Maxituf plastic lumber deck. To be done at Giddings Boatworks in Charleston 👍💯Giddings Boatworks

F/V Majestik outbound at sunset. Loved the wispy colorful clouds behind them. The name on the boat fits the picture! Oregon Dungeness Crab Commission National Fisherman Discover Newport Oregon Newport, OR.

02/25/2025

Machining some Maxituf plastic lumber. Cuts like butter