12/27/2022
https://dryfinish.wixsite.com/iso-finish/single-post/understanding-centrifugal-iso-finishing-technology
Why Centrifugal Iso-Finishing? Centrifugal Iso-Finishing is a high-speed and high-intensity mass finishing method in which abrasive or polishing materials are caused to interact with part edges and surfaces with ten times the surface pressure (10+ G’s) found in low energy finishing methods. What this means, in practical terms, is that it is possible to produce very refined surface finishes in abbreviated process cycle times that can obviate the need for over-lengthy processing that previously were the source of production bottlenecks. It also means that parts with complex and detailed geometries can be deburred with a minimum of manual intervention. This is because the higher surface pressures generated in the equipment makes it possible to utilize much smaller dimensioned media effectively. The smaller dimensions of these preformed media shapes make it possible to access areas that cannot be reached with more conventional sized media commonly used in lower energy positive-displacement or kinetic surface finishing methods.
For more information contact Dave Davidson at [email protected]. Ask about the free sample part processing program
For more information or a free sample part finishing trial contact me: Dave Davidson | Deburring/Surface Finishing Technologist [email protected] | dryfinish.wixsite.com/iso-finish With the continued advance of multi-axis machining and the increasing utilization of 3D metal printing...
