SRG Inc.

SRG Inc. Consultation & Onsite Service For Fire Service Support and Fire Training Centers Including Live Burn SRG U.S.

offers services for live burn buildings and planned maintenance. We specialize in the calibration, repair, and refurbishment of the sensors and instrumentation used in live burn training facilities. Burn buildings are constructed to withstand the stress created by repeated live burns, but they need ongoing maintenance and inspection. Over time this stress causes the potential for compromise in the

building and the temperature monitoring system. Our employees are highly skilled and will arrive with a fully equipped bucket truck prepared to repair, test and calibrate the entire TMS. By managing these buildings it helps to reduce the burden of maintaining compliance with the NFPA, federal, and state requirements for live training facilities. Please contact us today for a quote on burn building services and planned maintenance.

At today's training center, really enlightening information
07/28/2022

At today's training center, really enlightening information

Lowering a blower motor on a fuel conversion from class B to A. Thanks to our super skilled crew member Andrew.
04/18/2021

Lowering a blower motor on a fuel conversion from class B to A. Thanks to our super skilled crew member Andrew.

We have a large amount of random molding out of our NC location that we need to sell. Anyone Interested or know someone ...
04/18/2021

We have a large amount of random molding out of our NC location that we need to sell. Anyone Interested or know someone that is? A lot of this material is 16 feet in length.

03/14/2021

Live Fire Class B Prop Testing and Programming on the Eastern Shore

03/12/2021
Sometimes reaching a blower for service requires a little extra effort. Here is one of our team keeping it safe.
02/19/2021

Sometimes reaching a blower for service requires a little extra effort. Here is one of our team keeping it safe.

Here is a severely corroded fastener removed from a piece of 304 SS flashing in a burn building. Heat greatly accelerate...
01/30/2021

Here is a severely corroded fastener removed from a piece of 304 SS flashing in a burn building. Heat greatly accelerates the oxidation process, well defined by Arrhenius. This fastener was only in place for about seven years but has lost about 70% of its physical diameter. What's going on in your building?

Sometimes the sensor wires have to go underground!
01/18/2021

Sometimes the sensor wires have to go underground!

Helping out one of our channel partners with Helium recovery system decommissioning.
12/11/2020

Helping out one of our channel partners with Helium recovery system decommissioning.

This picture shows the effect of cost driven engineering. One circuit board with a heavy conformal coating makes the rel...
10/18/2020

This picture shows the effect of cost driven engineering. One circuit board with a heavy conformal coating makes the relay's get too hot. This failure could have been very serious.

See how much we love thermocouples. We wired this up last week. One of the patch panels for a 72 channel system.
07/13/2020

See how much we love thermocouples. We wired this up last week. One of the patch panels for a 72 channel system.

Address

311 Court St
Danville, VA
24541

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+14344293088

Website

Alerts

Be the first to know and let us send you an email when SRG Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category