ETABS Expert Tutor

07/24/2026

Master High-Rise Structural Design: From Core to Crown
" Stop pushing buttons in ETABS. Learn how to engineer complex stepped towers, hybrid steel-concrete interfaces, and lateral load paths like a Senior Project Engineer.

Are you ready to transition from basic frame modeling to mastering complex, real-world tall buildings?
Designing high-rise structures requires much more than drawing beams and columns—it demands a deep understanding of load redistribution across setbacks, core wall behavior, and hybrid steel-concrete connections.
In this hands-on, project-based masterclass, you will analyze, design, and optimize a multi-story stepped tower featuring a central shear core and an expressive top steel roof truss. You won't just learn how to run the software; you’ll learn why the structure behaves the way it does—and how to make critical engineering decisions when real-world constraints hit your desk.

🎯 What You Will Learn
Master Complex ETABS Modeling: Build confidence in modeling 3D mixed-material structures with setbacks and sloped roof trusses.
Diagnose Structural Irregularities: Identify and resolve soft stories, torsional stiffness imbalances, and stress concentrations at setback levels.
Bridge Hand Calcs with FEA: Use fundamental structural mechanics equations to check software results and verify load paths.
Handle Wind & Seismic Loads: Apply code-compliant lateral loads to high-rise geometry and interpret story drift outputs.
Think Like a Lead Engineer: Solve real-world architectural and mechanical constraints using strategic structural detailing instead of over-designing members.
💡 Why You Should Join This Course
100% Project-Based Learning: Every concept taught directly applies to a realistic high-rise tower project you can showcase in your portfolio.
Strategic Problem-Solving Approach: Learn how to create "problems within problems" to develop deep critical thinking skills rather than basic software usage.
Direct Industry Insight: Taught by experienced structural project management professionals who understand real-world site constraints, code enforcement, and structural optimization.
Practical Workflow Focus: Gain reusable verification spreadsheets, modeling checklists, and hand-calculation reference sheets designed for daily professional use.

HOW TO REGISTER & JOIN (3 EASY STEPS):
STEP 1: Secure Your Seat
Click the payment link below to complete registration:
https://lnkd.in/gUYDzbmr

STEP 2: Access the Event Page
https://lnkd.in/gfqg_NxN
Hit "Attend" on this LinkedIn Event page to sync the date/time with your personal calendar.

STEP 3: Get Your Live Zoom Link
Upon payment confirmation, your unique Zoom access link and passcode will be sent directly to your email.

🎟️ Limited Seats Available | Live Interactive Modeling & Real-World Engineering Scenarios.

11/21/2025

Bridging the Gap: From ETABS Output to Confident Code Design

Fellow engineers,

We spend days mastering ETABS to get the "right" forces. But then comes the real question: "Now what?"

How do you translate those moments and shears into code-compliant, safe, and efficient designs? This is where the black box of software ends, and the true art of engineering begins.

This exact challenge is why I created 'The Intuitive ACI Series.' My mission is to reverse-engineer the engineering soul of the ACI code.

I don't just give you rules; I give you the physical why. I've built powerful frameworks like "The Magnetism of Steel" and "The Point of Nonsense" to make complex concepts like the φ-factor feel obvious.

If you use ETABS and want to move from being a 'modeler' to a true 'designer,' this is your next essential step.

In this module, 'Flexure Decoded,' you will unlock:

📐 Louay's Equation: The direct geometric link between strain (ε_t) and φ. Eliminate lookup tables forever.

🧲 The Magnetism of Steel: Visualize why simply adding more rebar can jeopardize your ductility and safety.

🎯 The h/4 Rule: An instant, intuitive check to guarantee a ductile section.

⚠️ The Point of Nonsense: Identify where a "stronger" design becomes a dangerously weaker one.

This is for you if: You're preparing for the PE/SE exams or are a practicing engineer ready to replace rote memorization with genuine, unshakable understanding.

Join our founding cohort. Let's get back to the physics.

🟩Live Session: November 26, 7:00 PM ET
🟥 Secure Your Spot Here (Seats are intentionally limited):
https://bit.ly/TheStructuralExpert-Event1-FlexureDecoded

P.S. I explore the intersection of deep design and practical project management on my YouTube channel. Subscribe for more insights:
https://bit.ly/TheStructuralExpert-YouTube

This is the deep, intuitive understanding that software manuals don't provide.

| | |

07/04/2024

🌟 Supporting Engineering Education! 🌟
Help Us Enhance "The Structural Expert" YouTube Channel!

Hello, ETASB Expert Touter community!

I'm thrilled to share an important initiative from "The Structural Expert"! We're on a mission to enhance our educational content and provide even more valuable insights into civil engineering, FE Civil and PE exams, structural design software, and more.

How Your Support Makes a Difference:
With your help, we aim to acquire essential equipment like a Vibe 75 Smart Whiteboard, a professional camera, and a high-quality microphone. These tools will enable us to:
• Create clearer and more engaging lessons that cater to diverse learning styles.
• Empower aspiring engineers to grasp complex concepts with ease.
• Enhance the overall educational experience and ensure our content is accessible and impactful.

What "The Structural Expert" Can Bring to You:
• Expertise: Benefit from insights and knowledge shared by an experienced instructor with a background in structural design, construction project management, and teaching PMP and CCM certifications.
• Innovative Teaching: Learn differently with our unique approach that focuses on practical applications and learning from mistakes.
• Quality Content: Access comprehensive resources that cover a wide range of topics in civil engineering and structural design, helping you excel in your studies and career.

How You Can Help:
• Donate any amount to our GoFundMe campaign: https://bit.ly/TheStructuralExpert
• Share this post with your friends and network to spread the word!

Every contribution, big or small, makes a profound impact on our ability to provide top-tier education in civil engineering. Your support means the world to us and directly shapes the future of engineering education.

As the founder and instructor of 'The Structural Expert,' I'm deeply passionate about engineering education. This fundraiser is close to my heart because your contribution will help us reach more aspiring engineers and equip them with the knowledge they need to succeed.

Thank you for being part of our journey and supporting the future of engineering education!

Louay Awad, PMP, CCM
Founder, The Structural Expert

Hello everyone! Welcome to "The Structural Expert," where we'… Louay Awad needs your support for "Transform Engineering Education: Fund Interactive Learning"

12/05/2023

🏗️ Exciting News! 🏆

Thrilled to share the latest achievements in my construction project journey! 🌟

I've earned the Construction Manager in Training (CMIT) certificate, a milestone that wouldn't have been possible without the invaluable guidance and support of Don Laford. 🙌

Don has been an incredible mentor, sharing his expertise and wisdom every step of the way. His encouragement and insights played a pivotal role in my success in obtaining the Construction Manager (CM) certificate. 🎓

A heartfelt thank you to Don Laford for being a guiding light in my construction career.

Here's to more milestones and successes ahead!

Construction Project Management Achievements
https://www.credly.com/users/louay-awad

🚀

09/23/2022

Post #09

What is the P value to make the entire concrete under compression?


engineer

09/22/2022

Post #08

Considering the outcomes of Posts 07 and 06

Which of the following scenarios is the best and why?

09/21/2022

Post #07

For the scenario below,

If P= 860 KN, what is the stress value?


engineer

09/20/2022

Post #06

In the previous post, For P=860 KN, we had calculated the stress values.

Is it acceptable to choose any compression force value?
or the force has limits.

What’s P (Min) and P (Max) value?

09/19/2022

Post #05

If P=860 KN , What is the stress value?

09/18/2022

Post #04

What is the As (Required) to withstand the internal stress?
What’s the force in reinforcement steel?

Later, you'll need this force to compare with the post-tension force. (Note this) *