Lots Of Projects

Name: Lots Of Projects
Address: Flowery Branch, GA, 30542, US
Telephone: +17323093170

Call Directions Website Contact the business

Learn how to engineer your life! Follow along with our projects and learn how to save time and money by building your own.

10/14/2026

Solving another problem for a famous local musician.

This time the solution was a simple brake job.

Learn more about how I identify and solve problems with my engineering background. Link in bio

09/30/2026

Sometimes my projects are as simple as removing stumps with my Jeep winch.

Not every project needs custom designs or fancy computer software.

sometimes rolling up the sleeves and getting a good sweat in is all thats needed.

Learn how I solve all the problems in my life with the link in my bio

09/24/2026

I custom designed and 3D printed these organizers for my toolbox. they snap together with dovetails and magnets and keep my pliers neatly organized.

I teach people how to create custom solutions just like this - link in bio

09/23/2026

New YouTube video out now showing the complete setup process of a new 3D printer.

Learn with a complete beginner through the entire process. From unboxing to first print, see a new user experience 3D printing for the first time.

Get insight from me while I watched what mistakes a beginner would make.

Send this to that friend that has always wanted to start 3d printing.

06/30/2026

You guys asked for it, so here it is. This is the Door Upgrade Kit for the old style XJ Cherokee hinge from 1984-1996.

The kit is in final stages of testing and will be available soon.

Send me a DM if you want to be added to the waitlist

02/16/2026

I designed a custom logo for a friend's new Jeep build.

He wanted to combine the legacy Dauntless engine with the legendary LS engine platform.

He sent me a picture of his idea and I turned it into reality.

I found images of both logos online and overlaid them in my CAD software.

From here it was just tracing and combining digitally instead of on paper.

This software was able to output everything needed to cut vinyl and to 3D print.

02/14/2026

Designing a wall calendar frame to track my projects.

This project started with a cheap calendar that wouldn't sit flat on the wall. It was shipped like a poster, rolled up in a tube.

It wanted to keep that shape... really bad.

So I glued it to a piece of wood and created a frame out of trim.

the wood warped over time and caused some problems.

I would use a plati board if I had to do it again

procrastination

01/09/2026

Today my expensive CAD mouse mysteriously stopped working. After a closer inspection, the cable was cut where I had it zip tied.

I have never attempted to repair a USB device with wires this small. But hey, it cant be any more broken right? This means FREE learning and tinkering experience.

I stripped back the main wire housing carefully with a razor blade. With the sleeve removed, I was able to assess the damage. It looked like 3 wires were cut completely and 2 other were knicked in the process.

At first I attempted to solder them but my soldering iron was too big and put out too much heat. I pivoted to using soldered but connectors. With these, a heat gun can be used to control how much heat is introduced.

After some painstaking work with these tiny tiny wires, I was able to get everything connected.

Finger crossed I plugged it back in and......

IT WORKED!!!!!!

This fix took me 20 minutes total from problem to complete solution and saved me $300.

Link to space mouse pro: https://amzn.to/4aO00hG

A little bit of know-how and the courage to try goes a long way. I was worried that the aluminum foil looking EMF shielding would be critical for operation, but it seems not.

Now I just need to clean it up with some strategic electrical tape and hope this repair lasts for years to come.

01/08/2026

Day 8 of my Designs is this microphone clip.

This design went from an idea in my head to a product in my hand in less than an hour.

3D modeling and 3D printing are the perfect combination to solve simple problems like this. Any other solution would easily cost $10-$20.

If you want to learn 3D printing, 3D modeling and Engineering concepts, check out my Skool community. You can find the link in my bio. See you there.

01/04/2026

The skip feature on Bambu Labs 3D printers can save hours of time.

Are you scared to fill your bed with copies of objects because youre worried one will fail? If one fails on a traditional Printer, it will drag the excess plastic into the next object and destroy it. This has a dominoe affect that will ruin the entire print.

This 3D printer is able to skip an object directly from its touch screen. After skipping, it removes the rest of the model from the gcode and will act like it was never there.

Come join my Skool community for free and share your knowledge or learn from other like minded individuals.

skool.com
lotsofprojects.com

Address

Flowery Branch, GA
30542

Telephone

+17323093170

Website

http://lotsofprojects.com/, http://linktr.ee/lotsofprojects

Alerts

Be the first to know and let us send you an email when Lots Of Projects posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Lots Of Projects:

Want your business to be the top-listed business in Flowery Branch?