TOMI Environmental Solutions, Inc.

09/03/2026

Cleaning and disinfection are no longer one step. Under EU GMP Annex 1, they are two separate, independently validated procedures.

Integrating an automated decontamination system into a GMP cleanroom isn't just a technology choice; it's an infrastructure and compliance decision. It has to match your room's physical layout, your electrical and HVAC infrastructure, and your validated compliance requirements all at once.

In our latest post, we break down:

→ What actually counts as validated decontamination (vs. manual cleaning)
→ How iHP and VH2O2 technologies compare on dwell time, residue risk, and material compatibility
→ Portable, fixed, and hybrid configurations for single-room vs. multi-suite facilities
→ A 7-step framework for integrating decontamination into a new build or existing layout

If your facility is evaluating decontamination integration or defending one during an audit, this is worth the read.

Read more: https://buff.ly/LRKx73i

09/01/2026

Bio-decontamination validation isn't just about the surfaces you can see.

Biological indicators are placed at the hardest-to-reach, worst-case points in a space to confirm SteraMist's iHP technology reaches every point in the room. Shadowed areas. Seams. Casters. Hinges. If it's hard to reach, it's part of the validation.

Validated result: a 6-log (99.9999%) reduction, confirmed at the most challenging locations, not just the easiest ones.

Learn more about SteraMist support services, validation, and qualification packages: https://www.steramist.com/service/support-qualifications/

08/25/2026

A clean-looking surface isn't the same as a disinfected one, and that gap can be costly. Cleaning removes visible dirt and dust. Disinfecting kills the bacteria, viruses, and pathogens left behind. Skip either step, and you are only doing half the job.

The stakes are real: healthcare-associated infections affect roughly 1 in 38 hospital patients each day, costing U.S. hospitals $28–$45 billion annually. And manual cleaning alone cannot reach every seam, hinge, cord, or crevice where pathogens hide.

That is where no-touch disinfection comes in. SteraMist's ionized hydrogen peroxide (iHP) technology reaches the spots manual methods miss, helping healthcare, food safety, and life sciences facilities close the gap between "looks clean" and "is safe."

Read the full breakdown of cleaning vs. disinfecting 👉 https://buff.ly/BFIooTf

08/21/2026

Back-to-school means more than new backpacks and freshly sharpened pencils; it means classrooms, nurseries, and shared spaces filling up fast with germs right alongside the kids.

SteraMist's iHP technology delivers fast, effective decontamination for education and childcare environments, reaching toys, soft surfaces, and hard-to-clean corners without harsh chemical residues or extended downtime. Real spaces. Real results.✨

Ready to give classrooms and nurseries a healthier start to the school year? Reach out to learn how SteraMist fits into your facility's cleaning protocol 👉 https://buff.ly/MaJD9al

08/18/2026

Annex 1 Section 5.5 raised the bar on aseptic processing; both direct and indirect product contact parts now fall under stricter compliance requirements, closing a gap many facilities previously addressed with less rigorous methods. But contact-part compliance is only half the picture.

The surrounding environment, isolators, RABS, and pass-throughs also need a validated, repeatable decontamination cycle to control bioburden between runs. SteraMist iHP technology delivers a validated high log reduction to support your overall Contamination Control Strategy.

We broke down what Annex 1 actually requires, where the compliance gaps typically show up, and how manufacturers are closing them.

Read the full breakdown: https://buff.ly/2lBGbaq

GMP Annex 1 Section 5.5 requires sterilization of direct and indirect product contact parts in aseptic processing. Learn how SteraMist iHP supports compliance.

08/17/2026

PRESS RELEASE: TOMI Secures Critical Ireland Market Approval, Strengthening SteraMist's Position Across the European Union ➡️ https://buff.ly/p1IHXYv

$TOMZ

08/12/2026

Recent food safety recalls are a reminder: contamination risk in food processing facilities isn't hypothetical; it's an operational reality with real consequences. SteraMist's iHP technology delivers fast, effective disinfection across processing lines, equipment, and hard-to-reach surfaces, helping facilities strengthen their contamination control programs before problems start.

The results speak for themselves. One facility using SteraMist saw a significant drop in the detection of spoilage organisms, so sampling frequency was reduced from monthly to quarterly, cutting external lab testing and materials costs from roughly $100,000 annually to just $5,000 - a 95% reduction. 👉 https://buff.ly/X5hx686

Proactive decontamination isn't just good practice; it's good business.

In the high-stakes environment of food processing, early contamination detection is the only line of defense against outbreaks, financial losses, audits, and more. During routine sanitation checks…

08/11/2026

Flexible by design: the SteraMist Standalone can pair with a semi-permanently mounted internal applicator, delivering iHP decontamination directly into chambers, passthroughs, and enclosed spaces without the generator taking up interior footprint.

This configuration is built for facilities that need consistent, repeatable decontamination cycles in a fixed space, while keeping the generator accessible outside the chamber itself, and mobile enough to move into other spaces for decontamination.

Engineered for cleanrooms, bioexclusion suites, and other controlled environments where space and workflow matter.

Find out if the SteraMist Standalone is a fit for you: https://buff.ly/YMRc7ya

08/10/2026

TOMI Environmental Solutions, Inc. to Hold Conference Call to Discuss Second Quarter 2026 Financial Results on August 14, 2026 ➡️ https://feeds.issuerdirect.com/news-release.html?newsid=6577917366720870&symbol=TOMZ

$TOMZ

08/07/2026

A flexible way to bring iHP decontamination to every corner of your facility.

The Hybrid connects the portable Environment System to dedicated, ceiling-mounted stainless-steel applicators through a wall-mounted control hub. Use it as a fixed system in adjacent rooms or disconnect and roll it wherever you need it next.

Small footprint. Large reach. One system, many ways to decontaminate.

Learn more about the Environment System and its capabilities: https://buff.ly/jpqhUUU