JoDo Sewing Machine and Quilting Service-Harwinton, CT

12/15/2025

We're back from our fall break! Contact us now to get your machine scheduled for service!

Send a message to learn more

03/21/2025

Does Your Sewing Machine Need Serviced—Even If the Manufacturer Says It Doesn’t Need Oiling? 🤔🧵

Modern Machines & Reduced User Lubrication:
Many modern sewing machines, like those from Brother, are built with advanced materials that minimize the need for user-applied lubrication. But does that mean they never need service?

Importance of Professional Maintenance:
Despite the reduced need for user lubrication, these machines still require regular maintenance and lubrication by a qualified technician.

Access to Internal Parts:
Technicians have access to internal parts and gears that the user cannot reach, which are crucial for proper lubrication and overall machine health.

Our Service:
We'll remove the machine's casings for cleaning, use proper lubricants, check all critical measurements such as hook/needle clearance, hook and feed dog timing, tension calibration and shaft end play.

Click here to register for 15% off your first service!
https://www.jodosewing.com/service

02/23/2025

Don’t let your sewing machine look like this. We will clean and service it for just $80. Electronic machines $120. Anyone can just blow out the lint and put in a few drops of oil. We take off all the covers and check everything, use the proper l***s, test sew, and clean. It’ll come back like new!

06/01/2024

The beautiful workings of a just-serviced older Bernina. Get your machine serviced. Now just $79 for non-computerized models.

05/01/2024

Before and After photos. Let us service your machine.

04/10/2024

We offer repair service for all sewing machines such as this Singer Touch and Sew with broken gears.

01/27/2023

Before and after pictures of Husqvarna Viking 350.

05/19/2022

BabyLock Eclipse serger wasn’t feeding fabric. Screw and bushing that operate a linkage to the feed dogs was missing. Had to make a new bushing on a metal lathe and find a replacement screw.