OEM Solutions LLC

OEM Solutions LLC CNC Machine tool repair service specializing in Mazak machines and Mitsubishi controls

New Z axis ballscrew for this Multiplex today! Thanks for the call 👍
04/13/2026

New Z axis ballscrew for this Multiplex today! Thanks for the call 👍

New clamp cylinder seals in this VTC300 today. All apart and back together in 5 hrs. Running great and no more leaks! T...
04/09/2026

New clamp cylinder seals in this VTC300 today. All apart and back together in 5 hrs. Running great and no more leaks! Thanks for the call

The turret stopped rotating on this QTN. Found the gear on the back of the turret fell off and broke all the bolts! Fu...
04/08/2026

The turret stopped rotating on this QTN. Found the gear on the back of the turret fell off and broke all the bolts! Full teardown to get the shaft out and make the repair. All wrapped up and back in production. Thanks for the call!

Grease alarm on this VCN510. A ruptured hose under the table was found and replaced. Back up and running the same day! ...
04/04/2026

Grease alarm on this VCN510. A ruptured hose under the table was found and replaced. Back up and running the same day! Thanks for the call!

Lots of jobs completed at this customer over the last few days. Brandon Detaege on the assist. Thanks for the call!
04/02/2026

Lots of jobs completed at this customer over the last few days. Brandon Detaege on the assist. Thanks for the call!

X axis issues on this VCN. Some new bearings and additional testing shows a low resistance reading to ground on the wir...
02/20/2026

X axis issues on this VCN. Some new bearings and additional testing shows a low resistance reading to ground on the wiring. Brandon Detaege on the assist. Thanks for the call!

Renishaw probe issues on this HCN6800. Also magazine display problems and a tool measure issue. Thanks for the call!
02/18/2026

Renishaw probe issues on this HCN6800. Also magazine display problems and a tool measure issue. Thanks for the call!

New hydraulic unit for this QTN. Even some pizza ranch! Brandon Detaege on the assist.
01/28/2026

New hydraulic unit for this QTN. Even some pizza ranch! Brandon Detaege on the assist.

Control issues on this Variaxis 630. A quick reinitialization and reload took care of the issue. Thanks for the call!
01/28/2026

Control issues on this Variaxis 630. A quick reinitialization and reload took care of the issue. Thanks for the call!

Mill driver rebuild training for this customer today. Now they can rebuild them themselves at a fraction of the cost. Th...
01/21/2026

Mill driver rebuild training for this customer today. Now they can rebuild them themselves at a fraction of the cost. Thanks for the call!

Aligning up one Integrex and checking another. Brandon Detaege on the assist again. Thanks for the call!
01/18/2026

Aligning up one Integrex and checking another. Brandon Detaege on the assist again. Thanks for the call!

Some great work wrapped up this week. Brandon Detaege on the assist. Thermal compensation issues, oil leaks, clamp cylin...
12/12/2025

Some great work wrapped up this week. Brandon Detaege on the assist. Thermal compensation issues, oil leaks, clamp cylinder seal replacements and more! Even some lunch at Puzza Ranch Thanks for the call!

Address

Ixonia, WI
53035

Telephone

+12622266228

Website

Alerts

Be the first to know and let us send you an email when OEM Solutions LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to OEM Solutions LLC:

Shortcuts

Share

Category