AccuLens

AccuLens Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from AccuLens, Business service, 5353 W Colfax Avenue, Lakewood, CO.

Top US based, independent Specialty Contact Lens Manufacturer
Maxim 3D free-form scleral lens
NewVision semi-scleral Orthok


Https:// www.acculens.com/calendar

04/07/2026

Waiting for the right time to upgrade your equipment? ⏳

You might be waiting forever.

Other practices are already using tools like profilometry to streamline fittings, grow referrals, and save time.

There’s never a perfect time to invest—but there is a right time: now.

What’s stopping you from starting? 👇

03/31/2026

Still relying on trial sets and guesswork?

There’s a smarter way to fit scleral lenses—and it’s already in your hands.

Digital mapping cuts through the noise with precision.

What used to take weeks of back-and-forth can now be done in a fraction of the time.

⏱ Save this post if you're ready to ditch the outdated methods.

03/24/2026

You don’t need an extensive array of lenses to achieve successful fittings!

By starting with the correct diameter, you can reduce your diagnostic set from 12 lenses to just 6. This approach leads to less clutter, quicker fittings, and increased confidence in your choices.

Click the link in our bio to consult with our experts!

03/23/2026

Modern OrthoK design is no longer about choosing curves from a fitting set.

Acculens OrthoK lenses are built using elevation-based calculations, allowing each lens to match the eye’s unique geometry for improved centration and treatment stability.

With a continuous S-curve architecture and dual-meridian alignment, the design adapts smoothly from optic zone to landing zone—allowing precise adjustments without disrupting the overall lens structure.

Join our Skool Community to learn more:
https://www.skool.com/acculens-academy-5689/about

03/20/2026

Good data builds great OrthoK results.

03/18/2026

OrthoK adjustments should follow the treatment map—not just fluorescein.

If the treatment zone is centered but vision is off, adjust the target power (Jessen factor).

If the map shows a central island, reduce sagittal depth.
If there’s central bearing or staining, increase sagittal depth.

With Acculens’ elevation-based design, changes are recalculated across the entire lens—maintaining stability while refining the treatment zone.

Join our Skool Community to learn more: https://www.skool.com/acculens-academy-5689/about

03/17/2026

Central vault is a critical factor in specialty lens fitting!

Aim for a clearance of 250-300 microns over the steepest part of the cornea to allow enough room for settling and proper clearance. Understanding this measurement is essential for ensuring a successful fit and enhancing patient comfort.

What’s your experience with managing central vault? Share below!

03/16/2026

The first OrthoK check isn’t about perfection—it’s about predictable lens behavior.

At dispense, look for centration, balanced alignment zones, and the classic bullseye fluorescein pattern.

This pattern confirms that hydraulic forces are guiding epithelial redistribution as intended.

Remember: the real measure of success comes from post-wear topography and treatment progression, not the first fluorescein view.

Join our Skool Community to learn more: https://www.skool.com/acculens-academy-5689/about

03/13/2026

In OrthoK design, the Back Optic Zone Diameter (BOZD) shapes the treatment zone.

Smaller BOZDs concentrate the effect—often ideal for younger patients or higher myopia.

Larger BOZDs widen the treatment area, which can improve visual transitions and reduce halos in adult patients.

Because Acculens lenses use continuous S-curve geometry, adjusting BOZD automatically recalculates sagittal depth and alignment to maintain balanced lens behavior.

Join our Skool Community to learn more:
https://www.skool.com/acculens-academy-5689/about

03/11/2026

In OrthoK, the lens is only as good as the data behind it.

Acculens designs rely on accurate elevation inputs to calculate sagittal depth, alignment zones, and treatment geometry.

Clean scans, reliable keratometry, and consistent corneal diameter measurements allow the design engine to create a stable, centered treatment zone from the start.

Better data → more predictable lenses.

Join our Skool Community to learn more: https://www.skool.com/acculens-academy-5689/about

03/10/2026

Proper lens application is crucial for achieving the best fit!

To ensure accuracy, fill the lens with preservative-free saline and fluorescein, then have the patient look down while you apply it from below. If you notice any air bubbles, it’s essential to remove and reapply the lens for a perfect fit.

Click the link in our bio to consult with our experts!

Address

5353 W Colfax Avenue
Lakewood, CO
80214

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm
Sunday 8am - 5pm

Telephone

+13032326244

Website

https://www.acculens.com/calendar

Alerts

Be the first to know and let us send you an email when AccuLens posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AccuLens:

Shortcuts

Share

Category