What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

Advanced 360 Total Floor Care Systems

Name: Advanced 360 Total Floor Care Systems
Address: 14304 W 100th Street, Lenexa, KS, 66215, US
Telephone: +19133226200

Home
United States
Lenexa, KS
Advanced 360 Total Floor Care Systems

Call Directions Website Contact the business

Advanced 360 Total Floor Care Systems assists building managers throughout Greater Kansas City You shouldn’t have to choose between quality and service.

Advanced 360 Total Floor Care Systems has provided commercial and industrial floor cleaning and restoration services since 2004. We specialize in floor waxing, polished concrete, epoxy flooring, concrete repair, joint repair, terrazzo restoration, tile & grout cleaning, and VCT, LVT, and rubber floor maintenance throughout Kansas City, Lenexa, Overland Park, Olathe, Lawrence, Topeka, and the surrounding KC metro. We serve warehouses, manufacturing facilities, healthcare buildings, office spaces, and industrial properties with proactive maintenance programs and long-term surface protection solutions designed to deliver consistent results with zero babysitting. Visit us online for more information on our website http://advancedfloorcaresystems.com/.

10/05/2026

𝗔 𝗳𝗮𝗰𝗶𝗹𝗶𝘁𝘆 𝗺𝗮𝗻𝗮𝗴𝗲𝗿 𝗶𝘀𝗻𝘁 𝗷𝘂𝘀𝘁 𝗺𝗮𝗻𝗮𝗴𝗶𝗻𝗴 𝗮 𝗯𝘂𝗶𝗹𝗱𝗶𝗻𝗴.

Theyre juggling a whole set of 𝗰𝗼𝗺𝗽𝗲𝘁𝗶𝗻𝗴 𝗽𝗿𝗶𝗼𝗿𝗶𝘁𝗶𝗲𝘀.

There are always floors that need attention, repairs that need to be scheduled, projects that need to be planned, and problems that cant wait.

The challenge is figuring out 𝘄𝗵𝗮𝘁 𝘀𝗵𝗼𝘂𝗹𝗱 𝗯𝗲 𝗱𝗼𝗻𝗲 𝗳𝗶𝗿𝘀𝘁.

Which issues affect safety or performance? Which ones will get worse if they wait? Which ones can be monitored or addressed later?

The 𝘀𝗺𝗮𝗿𝘁𝗲𝘀𝘁 contractors are the ones who can help you figure out where your time, resources, and attention will make the 𝗯𝗶𝗴𝗴𝗲𝘀𝘁 difference.

09/28/2026

The finish on a VCT floor won't last forever—and that's the point.

In busy commercial buildings, that finish takes the abuse so the floor underneath doesn't have to.

But eventually, years of traffic and maintenance take their toll.

Periodic stripping and refinishing removes the worn-out finish and replaces it with a fresh protective layer, helping keep the floor looking good and protecting the VCT underneath.

Good VCT maintenance is all about knowing when your floors need a reset.

09/22/2026

𝗧𝗵𝗶𝘀 𝗶𝘀 𝘄𝗵𝗮𝘁 𝗿𝗼𝘂𝘁𝗶𝗻𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗶𝘀 𝘀𝘂𝗽𝗽𝗼𝘀𝗲𝗱 𝘁𝗼 𝗱𝗼.

Keep the floor looking good.
Address wear before it becomes a bigger problem.
Extend the life of the surface that's already there.

It doesn't always take a major restoration project to make a noticeable difference.

𝗧𝗵𝗲 𝗯𝗲𝘀𝘁 𝘁𝗶𝗺𝗲 𝘁𝗼 𝘁𝗮𝗸𝗲 𝗰𝗮𝗿𝗲 𝗼𝗳 𝗮 𝗳𝗹𝗼𝗼𝗿 𝗶𝘀 𝗯𝗲𝗳𝗼𝗿𝗲 𝗶𝘁 𝗻𝗲𝗲𝗱𝘀 𝘀𝗮𝘃𝗶𝗻𝗴.

09/16/2026

If your LVT has scratches on the surface, don't assume it needs to be replaced.

LVT comes from the factory with a protective layer. Sometimes, that layer gets scratched by heavy carts, equipment, or furniture. If the scratches are minor, they can be fixed without replacing the LVT.

This LVT floor had some minor scratches, so we removed the built up residue on the surface and then went over the whole area with a hog hair pad to provide a uniform appearance. No replacement required.

Other issues like dullness can also be fixed without replacement. On the other hand, sometimes LVT truly has reached the end of its life.

The important part is knowing the difference before you start planning a replacement.

09/11/2026

VCT can take a beating.

In a busy facility like this one, constant foot traffic, carts, spills, and daily cleaning will wear down the floor over time.

But worn doesn't always mean it's time to replace it.

The right maintenance and protective coating can help extend the life of an existing VCT floor and keep it looking good under heavy use.

Sometimes, the smartest flooring investment is getting more life out of the floor you already have.

08/31/2026

A lot of the most expensive floor damage we see could have been prevented.

Usually, it starts with a small mistake:

1) The wrong chemistry
2) Improper equipment
3) Ignoring early deterioration
4) Treating different surfaces the same
5) Waiting until restoration is unavoidable

These mistakes may not seem significant at the time, but over months and years, they can lead to serious floor problems.

Good floorcare isn't just about fixing problems. It's about understanding how to avoid them in the first place.

08/19/2026

Your carpet can look clean and still be holding a lot of soil.

This is what we pulled from a carpet that had already been cleaned by the building's regular cleaners.

A lot of that soil is abrasive. Every footstep works those particles deeper into the carpet, slowly wearing down the fibers.

Eventually, the carpet starts looking worn long before it should.

Regular cleaning keeps things looking good, but every so often, the carpet needs a deeper extraction to get what's been left behind.

The goal isn't just a clean carpet—it's a carpet that lasts.

08/17/2026

Sometimes the biggest cost of a flooring problem is the time it takes to resolve 🤔

Too much downtime disrupts operations, crowds your plate, and can even lead to tenant complaints.

When you need floor work done, a quick response and a fast turnaround might be the most important factor.

Less waiting. Less disruption. One less thing to worry about.

07/21/2026

𝗧𝗿𝗲𝗮𝘁𝗶𝗻𝗴 𝗧𝗲𝗿𝗿𝗮𝘇𝘇𝗼 𝗹𝗶𝗸𝗲 𝗮𝗻𝘆 𝗼𝘁𝗵𝗲𝗿 𝗳𝗹𝗼𝗼𝗿 𝗶𝘀 𝗮𝗻 𝗲𝘅𝗽𝗲𝗻𝘀𝗶𝘃𝗲 𝗺𝗶𝘀𝘁𝗮𝗸𝗲 💸

People often confuse Terrazzo with VCT—but they are actually fundamentally different, and they demand different maintenance practices.

VCT floors rely on floor finish that need to be stripped and refinished periodically.

When people treat Terrazzo with the wrong protective sealer or chemicals designed for other floor types, it can create serious long-term problems.

Good facility maintenance is about giving each surface the care it was designed to receive 🧠

07/13/2026

𝗪𝗵𝗲𝗻 𝗶𝘁 𝗰𝗼𝗺𝗲𝘀 𝘁𝗼 𝗰𝗼𝗺𝗺𝗲𝗿𝗰𝗶𝗮𝗹 𝗳𝗹𝗼𝗼𝗿𝗶𝗻𝗴, 𝘁𝗿𝗲𝗮𝘁𝗶𝗻𝗴 𝗲𝘃𝗲𝗿𝘆𝘁𝗵𝗶𝗻𝗴 𝘁𝗵𝗲 𝘀𝗮𝗺𝗲 𝗰𝗮𝗻 𝗯𝗲 𝗲𝘅𝗽𝗲𝗻𝘀𝗶𝘃𝗲.

Every flooring type has its own maintenance requirements, but some surfaces are more critical than others.

While improper maintenance can shorten the life of any commercial floor, mistakes on terrazzo and marble often become far more costly.

That’s why many property managers rely on specialists when natural stone is involved.

We recently published a blog exploring why terrazzo and marble require a different maintenance strategy than most commercial flooring. If you’re responsible for these surfaces, we think you’ll find it valuable.

Link to our blog in the comments ⬇️

Address

14304 W 100th Street
Lenexa, KS
66215

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Telephone

+19133226200

Website

https://advanced360floorcare.com/

Alerts

Be the first to know and let us send you an email when Advanced 360 Total Floor Care Systems posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Advanced 360 Total Floor Care Systems:

Want your business to be the top-listed business in Lenexa?