Resell CNC

06/14/2026

24 inches of swing. 82 between centers. 7.1 through the bore.

This 2006 Mazak M5N is a heavy-duty big-bore lathe built for the pipe, tube, and shaft work smaller machines can't pass: 30 HP main spindle to 1,000 RPM for low-speed, high-torque cuts, an A2-15 nose, and an 8-station disk turret with 6 boring bar positions for deep internal work. The Mazatrol 640T includes the EIA package plus threading start point and re-threading functions for repair work on existing threads. Tailstock and transformer included.

Full specs and pricing: https://www.resellcnc.com/products/used-cnc-lathes/01tVS00000DDZgPYAX/mazak_m5n

06/13/2026

80 x 30 x 30 inches of travel. On a Fadal.

This 2014 Fadal VMC 8030B puts big plates, long molds, and tombstone work on an 82.5 x 30 inch T-slot table, with a 40-taper 10,000 RPM spindle, 21-station side-mount tool changer, and rugged box-way construction for heavy cuts in steel and cast iron. The 64MP control keeps programming and setup familiar for any operator who has run a Fadal.

🌐 Full specs and pricing: https://www.resellcnc.com/products/used-cnc-verticals/01tVS00000DINt7YAH/fadal_vmc_8030b

06/13/2026

If you've been putting off a machine purchase, the math just changed in your favor.

The One Big Beautiful Bill Act brought back 100% bonus depreciation, permanently, and here's the part most shops miss: it applies to used equipment too. A used CNC machine you put in service this year can qualify for the same full first-year write-off as a brand-new one, at a fraction of the price. The bill also doubled the Section 179 limit to $2.5 million.

We broke down what it means for shops at every scale, from the one-machine shop to a multi-site group, and what to line up with your accountant before year end.

🌐 Read the full breakdown: https://www.resellcnc.com/cnc-resell-news/article/big-beautiful-bill-machine-shops
(General info, not tax advice. Confirm with your CPA.)

06/13/2026

80 inches between centers.

This 2006 Mazak QTN 350-II x 80 is built for the long shaft work standard lathes turn away: 26.77" swing, a 4.4" spindle bore passing 3.5" bar, 40 HP main spindle to 3,300 RPM, 12-position drum turret, and an MT5 tailstock for long workpiece support. Mazatrol Matrix Nexus gets shaft jobs from print to first cut fast, with full G-code compatibility for production work.

🌐 Full specs and pricing: https://www.resellcnc.com/products/used-cnc-lathes/01tVS00000DDb77YAD/mazak_qtn_350-ii

06/12/2026

64 inches of X. A 4th axis built in. A control your operators already know.

The 2018 Haas VM-6 is the mold-shop build of the large-frame Haas platform: 64 x 32 x 30 inch travels over a multi-fixturing T-slot table with precision dowel-pin bores, a 12,000 RPM inline direct-drive CT40 spindle at 30 HP, and a built-in HRT-100 4th-axis rotary. WIPS probing and thru-spindle coolant included.

🌐 Full specs and pricing: https://www.resellcnc.com/products/used-cnc-verticals/01tVS00000DGoXdYAL/haas_vm-6

06/12/2026

We're growing and we're looking for the right person to grow with us.

Our mission at Resell CNC is to Keep America Strong. We do that by helping American manufacturers stay competitive through smarter buying and selling of capital equipment. Every machine we move keeps a shop running, a worker employed, and an industry moving forward.

The person in this role is on the front line of that mission.

This is high-ticket B2B sales with a 1-to-7-day close cycle. Real buyers, real budgets, real urgency. No CNC experience required. If you can build relationships and close with conviction, we'll teach you the rest.

On-site in Maitland, FL. Full benefits. Room to grow.

Apply now:

Resell CNC is hiring a Sales Account Manager in Maitland, FL. B2B equipment sales, 1–7 day cycle, $100K first-year potential, no commission cap. Apply now

06/12/2026

The CMM room is closing.

For decades, quality lived down the hall: you cut the part, carried it to a climate-controlled room with a granite table, waited in the queue, and found out an hour later whether it was scrap. By then the machine had already cut ten more.

That loop is closing onto the spindle. On-machine probing measures the part while it's still clamped, compares it to the model, and corrects the offset before the next pass. The CMM still owns the traceable, audit-grade work. Everything else is moving to the floor, and the machinist who can read the data is the new quality authority.

This week's Next Shift breaks down what closed-loop machining actually changes, and what the CMM room still owns.

🌐 Read it here: https://www.resellcnc.com/cnc-resell-news/article/closed-loop-machining-spindle-becomes-the-inspector

06/11/2026

Hold tolerance through the entire 5-axis sweep, not just the start of it.

The 2018 DMG Mori DMU 40 eVo Linear runs direct linear-motor drives on X, Y, and Z instead of ballscrews: zero backlash, tighter accuracy on long simultaneous moves than the standard eVo. 24,000 RPM HSK-A63 spindle, 60-tool magazine, Siemens 840D sl CELOS, probing and laser tool setting built in.

🌐 Full specs and pricing: https://www.resellcnc.com/products/used-cnc-verticals/01tVS00000DIMSPYA5/dmg_mori_dmu_40_evo_linear

06/11/2026

🚨 Auction Day! Surplus Assets to Digital Tool & Automation Online Auction
100+ Lots - CNC - Shop Support
Mori Seiki - Haas - Eurotech
Closing at 1:00 PM EST.

🌐 https://bit.ly/4xkE2vJ

06/10/2026

Fine-detail aluminum, medical, and electrode work needs real spindle speed. This one spins to 24,000 RPM.

2017 Fanuc Robodrill D21MiA5 High Power Version, a compact 30-taper machining center built for high-RPM precision work. 24,000 RPM BT30 BIG-PLUS spindle delivering up to 35 HP, 0.9-second tool changes, 2,125 IPM rapids, 19.7 x 15.7 x 12.9 inch travels, 21-position turret. Fanuc 31i-B5 Nano control with 16-million pulse/rev encoders for tight positioning.

🌐 Specs and pricing: https://www.resellcnc.com/products/used-cnc-verticals/01tVS00000DBWmgYAH/fanuc_d21mia5