Marietta Metal Fab

Marietta Metal Fab Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Marietta Metal Fab, Business service, 2590 Pleasant Valley Road, Marcellus, NY.

Did a lil build out for . Fabricated a shelf for personal rescue gear, chainsaw/fuel storage, a drone battery charging...
06/21/2022

Did a lil build out for . Fabricated a shelf for personal rescue gear, chainsaw/fuel storage, a drone battery charging station, hose storage bin, shovel storage rails and a few other little goodies too.

I needed a ripper for the mini excavator so, I built one. 1” main shank, 1/2” coupler plates, 1/4” wear plates and an o...
06/07/2022

I needed a ripper for the mini excavator so, I built one. 1” main shank, 1/2” coupler plates, 1/4” wear plates and an old bobcat tooth/adapter I had kicking around.

A quick batch of 16ga steel shaft coupler shrouds banged out this afternoon.
06/01/2022

A quick batch of 16ga steel shaft coupler shrouds banged out this afternoon.

Whipped up a new tailgate and tarp retainer for this 1 ton dump truck. Burned out some 1/8” plate, stuck it in the ole ...
05/23/2022

Whipped up a new tailgate and tarp retainer for this 1 ton dump truck. Burned out some 1/8” plate, stuck it in the ole 130 ton metal mangler, and zapped it all together.

A quick lil on site repair. The boys from Buffalo were stuck at the job site because their vac trailer had a broken sp...
05/11/2022

A quick lil on site repair. The boys from Buffalo were stuck at the job site because their vac trailer had a broken spring perch. Whipped up and new one and zapped it on.

I whipped up this 3/16” aluminum fuel transfer tank this weekend. Fork pockets, drain plug and handles were added for c...
05/01/2022

I whipped up this 3/16” aluminum fuel transfer tank this weekend. Fork pockets, drain plug and handles were added for convenience.

A quick stainless handrail modification for the contractors working at F-M schools. We simply had to cut the ends, wel...
04/15/2022

A quick stainless handrail modification for the contractors working at F-M schools. We simply had to cut the ends, weld back on at a 6° angle, and blend.

This old Mosler safe took a fall as it was being lifted by an excavator. The lower hinge snapped as the door swung ope...
04/01/2022

This old Mosler safe took a fall as it was being lifted by an excavator. The lower hinge snapped as the door swung open and fell off. Amazingly, after being welded, the door shut perfectly on the first attempt! The lock mechanism is quite impressive! Those old timers really did an amazing job putting this thing together!

Today’s project, a pair of fire truck ladder brackets. We were able to snap a pic of the original part, upload it to th...
04/01/2022

Today’s project, a pair of fire truck ladder brackets. We were able to snap a pic of the original part, upload it to the burn table, make a few adjustments and then click “cut”. Simple and satisfying little job

This Defender is ready for a full day of work in the woods! We fabricated this aluminum ladder/lumber rack, capable of...
03/17/2022

This Defender is ready for a full day of work in the woods! We fabricated this aluminum ladder/lumber rack, capable of carrying 4x8 sheets of plywood and whatever else he can load on it. We also whipped up a “bumper dumper” for him because there’s nothing worse than getting out there to work, and having to leave the job site to…😂

Skid steer snow pushers baby! 8’ wide with rubber cutting edge. We’re going to build more, soon! ...
01/05/2022

Skid steer snow pushers baby! 8’ wide with rubber cutting edge. We’re going to build more, soon!

Address

2590 Pleasant Valley Road
Marcellus, NY
13108

Telephone

+13155308331

Website

Alerts

Be the first to know and let us send you an email when Marietta Metal Fab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category