Welding Worx LLC

11/19/2022

Someone got a little aggressive pulling trees out. Instead of the flat bar, mesh,and angle I use 2x4 tubing for the frame, worry free tree transportation, resting them on the frame and the tree not damaged is a game changer. Also 2”x1/4 flat bar for the middle as support with a d ring on top center to pull trees out and also to secure them when installing. Don’t forget folks we are approaching push box and plow season. Let’s get those attachments cleaned up and ready to make some snow money!

11/10/2022

11/10/2022

8x10 I-beam installed to add extra support to the new walk way. This beautiful farm house was gutted and now renovating, once they started they decided the doorway walking into the kitchen/ living room area needed to be wider. Unfortunately the existing beam did not stretch all the way across from wall to wall. The engineer decided to put up another I-beam just 4 feet shorter….duct jack to the rescue!! Then a 4” pipe with 1/2” flat plate on top welded to the beam and bottom plate anchored to the concrete, welding the new beam to the existing on the end and fabricated a plate to weld to the existing beam in the wall and the new one.

10/10/2022

Fabrication, welding, and equipment/ trailer repairs and modifications

09/03/2022

Welding with the best of em!

08/25/2022

New set of welding caps and one cap to wear when I’m riding the motorcycle. Huge shout out to Mandy’s Caps, she does an amazing job every time and 100 percent USA made! I’ve been buying these welding caps from her for almost 3 years now and never disappointed. Contact her for any kind of custom head wear etc.

08/20/2022

Welding columns to a beam for an addition.

08/20/2022

Installed a couple vices for Donegans Tree Service now they have a place to comfortably sharpen their saws

08/20/2022

Railing done and installed!