Rage Industries LLC

Rage Industries LLC Rage Industries LLC in Mayslick Ky is a highly skilled gunsmith shop. Find us on Facebook, Google, and Instagram

Specializing in a wide range of services, cleaning and parts replacement to intricate customization prioritizing services over retail, ensuring top notch craftsmanship and expertise.

03/21/2026

Good morning!! I’m not sure if anyone will be able to see this, but we’ve had a lot of questions lately regarding the status of our business due to lack of posts from this page.

This page was flagged for multiple things (pew pew related things) requested a review it was denied- fb will not allow Jeff access to it. I’m not sure it can be found even if someone searches for it.

With that being said, Rage Industries is still very much alive and active providing services every day! If you’re interested in having something done, just have a question, or need pew pew advice, you can reach out to Jeff directly at 6064073409. We’re also active on instagram

Did an internal cleanup, polished up hammer struts and added spring spacers to this Stoeger 12ga today. Then as usual Te...
12/30/2025

Did an internal cleanup, polished up hammer struts and added spring spacers to this Stoeger 12ga today. Then as usual Test Fired it🤣😉

Finished up the week with a Re*****on 700 (30-06) Glass/pillar bedded, Timney trigger install.
12/20/2025

Finished up the week with a Re*****on 700 (30-06)
Glass/pillar bedded, Timney trigger install.

Did some cutting and threading today. Savage 110 .308 from 20” to 16”I may be wrong but the way the factory did it is no...
12/19/2025

Did some cutting and threading today. Savage 110 .308 from 20” to 16”
I may be wrong but the way the factory did it is not to spec for 5/8-24 threads. They only made them to 1/4” long. They should be 5/8 long, dia. = length, but maybe I’m missing something. Idk 🤷 going with what I know.

I’m not really a fan of timney triggers but when they get worn down they can be re-adjusted, so that’s what I do. Inter ...
12/11/2025

I’m not really a fan of timney triggers but when they get worn down they can be re-adjusted, so that’s what I do.
Inter arms - Ma**er clone rifle

Re*****on 512, .22lr.Where to begin?It was assembled incorrectly, causing parts to be bent. Then on those bent parts I g...
12/06/2025

Re*****on 512, .22lr.

Where to begin?

It was assembled incorrectly, causing parts to be bent. Then on those bent parts I guess it was decided that it didn’t need the spring that the factory put on, so it was missing.
It must have been fired quite a bit, the magazine spring barely had enough pressure to push the follower, so why would it push a cartridge onto the lifter? It doesn’t.
The lifter adjustment screw is staked from the factory, so that it can’t be easily unscrewed, someone ignored that completely.

Anyway my .22lr rant is over and after 4-5 hours of work, it’s working correctly again, cause that’s what I do 🤣🤣🤣🤣

Cleaned up and greased the trigger on a customized Ma**er .308
12/06/2025

Cleaned up and greased the trigger on a customized Ma**er .308

And… today we cleaned up a Tikka T3 .270
12/06/2025

And… today we cleaned up a Tikka T3 .270

Mossberg MMR Hunter Ar15, getting the barrel threaded. It’s never as easy as it sounds, but it’s done.
12/02/2025

Mossberg MMR Hunter Ar15, getting the barrel threaded. It’s never as easy as it sounds, but it’s done.

Henry .410 , needed a chamber honing. Not much to see.
12/02/2025

Henry .410 , needed a chamber honing. Not much to see.

Address

41043 US Highway 62
Mayslick, KY
41055

Opening Hours

Wednesday 9am - 4pm
Thursday 9am - 4pm
Friday 9am - 5pm
Saturday 9am - 1pm

Website

Alerts

Be the first to know and let us send you an email when Rage Industries LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rage Industries LLC:

Shortcuts

Share

Category