Tennsmith Inc

Call Directions Website Contact the business

Tennsmith Inc TENNSMITH is recognized worldwide as a premier leader in the manufacture of sheet metal fabricating

METALCON day 2 is in full swing! Stop by booth 300 to see our family of sheet metal fabrication equipment, from folders ...
10/08/2026

METALCON day 2 is in full swing! Stop by booth 300 to see our family of sheet metal fabrication equipment, from folders and shears to coil processing machines, roll formers, and cold forming equipment.

We're live at METALCON with our new and improved SBS 126-14 AutoBrake FLEX, bending up to 155° with a 1" recessed bendin...
10/07/2026

We're live at METALCON with our new and improved SBS 126-14 AutoBrake FLEX, bending up to 155° with a 1" recessed bending beam for forming drip edge, box gutters, hat channels, and more.

Check it out at booth 300!

Move-in is officially DONE and we’re ready for Metalcon! 🙌After days of set up and getting every last detail in place, t...
10/06/2026

Move-in is officially DONE and we’re ready for Metalcon! 🙌

After days of set up and getting every last detail in place, the Tennsmith booth is ready for METALCON 2026!

We brought a lot to Orlando this year — including the 2 new Autobrakes!

Doors open tomorrow — come find us!

📍 METALCON 2026 | Orlando, FL 📍 Booth #300
🇺🇸 Built in the USA. Built to work.

Move in is going well and we are about ready for METALCON!This year’s booth is packed with equipment — including three d...
10/05/2026

Move in is going well and we are about ready for METALCON!

This year’s booth is packed with equipment — including three different Autobrake models, two types of roll formers, a perforator, our new-style shear, the latest AutoKut setup, ECKOLD machines and more.

There is A LOT to see this year, so stop by Booth #300 and see the machines up close.
📍 METALCON 2026 | Orlando, FL 📍 Booth #300
We’ll see you at the show!

The machines are loaded up and on their way to METALCON! 🚛Be sure to stop by Booth #300*and see them in action! We’re b...
09/30/2026

The machines are loaded up and on their way to METALCON! 🚛

Be sure to stop by Booth #300*and see them in action! We’re bringing a huge lineup to Orlando this year, including:

⚙️ TWO all-new FLEX-style Autobrakes
⚙️ New-style AutoKut 100
⚙️ New 10M16 Shear
⚙️ Roll Former FHA Drip Edge & 5V Panel machines
⚙️ Powered Decoiler
⚙️ ECKOLD machinery- shrinkers & stretchers
…and more!

There’s a lot to see this year. **We’ll see you next week in Orlando!**

📅 October 7–9, 2026
📍 Booth #300

1 week until METALCON! Will we see you there?Come see the new SBS126-14 FLEX live and in action, along with other machin...
09/30/2026

1 week until METALCON! Will we see you there?

Come see the new SBS126-14 FLEX live and in action, along with other machinery from Roper Whitney and Roll Former LLC!

Connect with our team, check out the machines up close, and discover how you can take your metal shop to the next level with the .

📅 October 7–9, 2026
🌴 Orlando, FL
📍 Booth 300

**See you in Orlando!**

Need an upgrade but dreading the hassle?This is for you.When you trade in used Tennsmith equipment, you skip the stress ...
09/29/2026

Need an upgrade but dreading the hassle?
This is for you.

When you trade in used Tennsmith equipment, you skip the stress of selling your used machine yourself and get credit toward a brand-new machine equipped with the latest features. We’ll work with you to evaluate your machine, maximize your trade-in credit, and find the right upgrade for you.

Save time, money, and stress when you trade in with Tennsmith.
For more information, visit the link in the comments below! ⬇️

09/24/2026

See the AutoKut 160 in action!
In this video, we’re testing the AutoKut 160, built to process coil up to 50" wide at speeds up to 115 FPM.

Watch as we use the slitter blades to cut material into strips at the desired widths and cut them to length.
You’ll also see us disengage the slitter blades and run the material straight through to the guillotine-style shear for cut-to-length processing.

Whether you need to slit to width, cut to length, or both- the AutoKut gives you an efficient way to process coil for your operation.

Which AutoKut is right for you?

That depends on your application.
Material thickness, the number of slits you need, material width, etc..- all play a role in selecting the right model and configuration.

We have multiple AutoKut options available, so you don’t have to figure it out alone.

Contact us and let us help you find the right AutoKut for your application.

FEATURED PRODUCT: LM1010 Mechanical ShearHeavy-duty cutting. Precision you can trust.Built for shops that need serious c...
09/22/2026

FEATURED PRODUCT: LM1010 Mechanical Shear
Heavy-duty cutting. Precision you can trust.

Built for shops that need serious cutting capacity, the Tennsmith LM1010 handles up to 10-gauge (3.5 mm) mild steel across a 121" cutting length.

The 30" 2X Backgauge allows for fast, accurate, and repeatable positioning, helping keep material moving through your shop.
When you need the capacity to take on heavier-gauge material, the LM1010 is built to get the job done.
Contact Tennsmith today to learn more! [email protected]

09/22/2026

Make hat channels, drip edge, and other profiles easier with the SBS126-14 FLEX.

The recessed bending beam gives you the additional clearance needed to form profiles that can be difficult—or impossible—to produce on a traditional straight folder.

More clearance. More forming possibilities. More flexibility for your shop.

If you’re producing hat channels, drip edge, flashing, trim, and other profiles, the SBS126-14 FLEX is built to give you more capability from one machine.

Expand what you can form. Get your SBS126-14 FLEX now.
Link in the comments ⬇️

Address

6926 Smithville Highway
McMinnville, TN
37110

Opening Hours

Monday 7:30am - 4pm
Tuesday 7:30am - 4pm
Wednesday 7:30am - 4pm
Thursday 7:30am - 4am
Friday 7:30am - 3:30pm

Telephone

+19319342211

Website

Alerts

Be the first to know and let us send you an email when Tennsmith Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Tennsmith Inc:

Shortcuts

Share

Category