Novus Thing

Novus Thing Experience the future of fabrication with our engineer design and 3D printing service

05/08/2026

We cr we ate this hinge design in order to use thread insert and bolts for the assembly. What do you think about the design. So far, is easy to assembly and for use with a little of loctite you can setup the precise tightening to obtain that desire presión to open an close. Let us know what do you think on the comments

www.novusthing.com

05/07/2026

We offer more than just color customization on this product. You can also choose from over 15 different switch k***s options. And let us tell you that if you want a different one just write us a DM and we will make it

www.novusthing.com

05/06/2026

It was a long time since we made one of this, but every time we made one we like it a little more. The design is simple and with the half bottom part printed with clear petg the amount of light coming out is incredible! Let us know what you think?

www.novusthing.com

05/05/2026

The only way to 3D print this item in one single part was using the H2S and rotate the item 45 degrees on the z-axis. The item is 360mm length. I think we could go for a little more but we can only print one at a time (here we were printing 2). Another reason why we love the H2S model

www.novusthing.com

04/12/2026

The truth is that this is not a 100% new product! We just combine two of our popular products. We take the round mount walkie Talkie and modify it to be installed with our "toyota land cruiser 80 series central dashboard mount". We don't know if we should add as an optional for the central dashboard listing, create a new list or both? What do you think? Let us know on the comments

www.novusthing.com

04/10/2026

This is a simplecway to show you an important difference between the bambulab H2D and H2S. Every body will tell you that one have one nozzle and the other one have two. But the printing size capacity is different. They use the same printing bed sheet but the truth is that for H2D you can use that hole area. The right nozzle can't reach all way to the left and the left nozzle can't reach all the way to the right.
Here you can see how a simple proyecto can't fit on the H2D but it can fit on the H2S

www.novusthing.com

04/08/2026

This spool of filament was drop-off when we got out for lunch (Murphys law) and it was raining. The box was really wet, but fortunately the internal plastic bag was in perfect conditions 🫨. But definitely we rush our lunch because we received the Amazon notification hahahaha

www.novusthing.com

04/06/2026

We reed to recreate some house identification numbers, that means that would be exposed to outdoor conditions. Plus, the customer wants a wood look on the front face. This was our first time doing this technique. It not hard to obtain (a couple of videos on YouTube and you'll get it hahaha). Although we have to run some test for the customer, so he can pick the deep of the wood texture. What do you think? Let us know on the comments

www.novusthing.com

04/02/2026

🚨 STOP wasting material on your 3D prints… 🚨

Most people ignore this ONE setting… and it’s costing them quality, time, and money. 💸

👉 Volumetric flushing isn’t just a “nice to have” — it’s the difference between:

❌ Dirty color transitions
❌ Time waste
❌ Failed prints

In this reel, I show you two prints. On the top one you can see that the white color is mix with the red color, so the end result is a fail print.

If you’re serious about leveling up your 3D printing game, you can’t ignore this.

💬 Drop a “FLUSH” in the comments if you’ve struggled with color changes

💾 Save this for your next print
📲 Share it with someone wasting filament without knowing why

www.novusthing.com

04/01/2026

Well this personalization order is for a kind of obvious name hahahha just in case that anyone find this item and don't know what is for. What do you think about this customization? Let us know on the comments

www.novusthing.com

Address

Miami, FL
33172

Telephone

+17863285936

Website

http://www.novusthing.com/

Alerts

Be the first to know and let us send you an email when Novus Thing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share

Category