Nikka Corp Nashville

04/26/2026

🔥 FEATURED FRIDAY: Premera Crystal Densifier at Nikka Corp 🔥

Concrete coating pros, polishers, and installers — this one is built for speed, clarity, and performance.

Premera Crystal Densifier is part of the Premera One Day Polish System, designed to help crews move faster without sacrificing the finish. This sol-gel based SiO₂ densifier is applied directly to a 100 transitional profile concrete surface, then burnished as soon as 1 hour after application with up to a 3000 grit diamond pad.

The result? A crystal-clear, quartz-mineral barrier layer that helps densify the concrete while creating a polishable surface built for high clarity, abrasion resistance, and chemical resistance.

✅ Sol-gel based SiO₂ densifier
✅ Spray-on application
✅ Skip resins and go straight to burnish
✅ Burnish 1 hour after application
✅ Burnish up to 3000 grit
✅ Designed to create a mirror-finish polish
✅ Approx. 2,000 sq. ft. per hour with 1 crew of 2 and 1 burnisher

For contractors looking to reduce polishing time and improve production, this system is a serious game changer.

📍 Nikka Corp Locations:
Charlotte, NC — 980.209.0939
Doraville, GA — 678.530.0831
Marietta, GA — 678.290.0838
Orlando, FL — 407.203.4237
Nashville, TN — 615.915.1555

🌐 nikkacorp.com

04/26/2026

Concrete coating pros — let’s talk densifier.

A densifier is not a coating. It’s a reactive treatment that penetrates the concrete and reacts with calcium hydroxide in the slab to help create a harder, tighter, more abrasion-resistant surface.

For installers, that matters when you’re dealing with soft, dusty, porous, or older concrete where slab consistency can affect coating performance.
Used correctly, a densifier can help:
✅ Reduce surface dusting
✅ Improve surface hardness
✅ Tighten porous concrete
✅ Create a more consistent substrate
✅ Support better long-term floor performance
But here’s the key:
Densifier does NOT replace proper surface prep.
You still need to evaluate the slab, mechanically prep the surface, clean thoroughly, allow proper dwell time, remove excess residue, and confirm the surface is dry before coating.

Pro Tip: Never leave densifier residue on the surface. Shiny, sticky, powdery, or glassy residue can interfere with adhesion and create bond issues.

At Nikka Corp, we help coating professionals understand when to use a product, why it matters, and how to apply it correctly — because better prep leads to better floors.

📍 Stop by your local Nikka Corp for expert product guidance and professional concrete coating supplies.

01/15/2024

https://www.facebook.com/share/Ugb8k67qhuqzKS5v/?mibextid=QwDbR1

11/22/2023

04/22/2023

For all you concrete polishing needs great Tooling for polishing and chemical.