Cablecraft Engineered Motion Controls

Cablecraft Engineered Motion Controls We are Cablecraft, the leader in Engineered Motion Controls.

Control cables rarely fail in CAD. They fail in routing. Tight bend radius, too many bends, and side loading at the cond...
05/07/2026

Control cables rarely fail in CAD. They fail in routing. Tight bend radius, too many bends, and side loading at the conduit exit can drive high effort, lost motion, and early wear. Write routing rules into the spec, then validate them with a prototype build. That is how you get consistent feel and predictable output travel in the real world.
https://loom.ly/SNclAX4

Day 2 is underway at the NBAA Maintenance Conference in New Orleans.Cablecraft and Radial Bearing are at Booth 502 today...
05/06/2026

Day 2 is underway at the NBAA Maintenance Conference in New Orleans.

Cablecraft and Radial Bearing are at Booth 502 today, talking with aviation maintenance professionals, engineers, and industry partners about motion control solutions built for demanding aerospace applications.

Stop by to see our control cables, rod ends, spherical bearings, and linkage solutions up close and let’s talk through the application challenges you’re working to solve. We’ll be here today until 5:00 p.m. at the New Orleans Ernest N. Morial Convention Center, Hall E.

See you at Booth 502.

We’re set up and ready to connect at the 2026 NBAA Maintenance Conference in New Orleans.Stop by Booth 502 and see how o...
05/05/2026

We’re set up and ready to connect at the 2026 NBAA Maintenance Conference in New Orleans.

Stop by Booth 502 and see how our engineered motion control solutions support demanding aerospace and aviation applications from control cables to rod ends, spherical bearings, and custom linkage solutions.

Show location:
New Orleans Ernest N. Morial Convention Center
Hall E | New Orleans, LA

Show dates / open hours:
Tuesday, May 5: 12 p.m. – 6:30 p.m.
Wednesday, May 6: 8:00 a.m. – 5:30 p.m.
Thursday, May 7: 8 a.m. – 1:30 p.m.

If you’re attending NBAA, we’d welcome the opportunity to talk through your application needs, design challenges, and maintenance-critical motion control requirements.

See you at Booth 502.

Most control cable problems are not cable problems. They are system problems that show up late, after release, when chan...
05/05/2026

Most control cable problems are not cable problems. They are system problems that show up late, after release, when changes are expensive. Cablecraft works engineer to engineer to lock in routing, effort, and repeatable output travel early, so validation does not become a scramble. If your current supplier only builds to print, you are leaving performance to chance.
https://loom.ly/StfNwxw

Your equipment does not care about your supplier’s excuses. It cares about uptime. Cablecraft’s Cable Assembler Network ...
04/28/2026

Your equipment does not care about your supplier’s excuses. It cares about uptime. Cablecraft’s Cable Assembler Network helps customers get the right cable built to spec fast, using original Cablecraft components and local support. If your current path to replacement cables is slow, inconsistent, or dependent on long lead times, we can tighten that loop.

When a supplier exits, lead times spike, or a program goes end of life, the real risk is not only availability. The risk...
04/23/2026

When a supplier exits, lead times spike, or a program goes end of life, the real risk is not only availability. The risk is performance drift, revalidation churn, and field headaches because the “replacement” is not truly equivalent.

Cablecraft supports product line transfer the way it should be done: lock the requirements, control the variables, validate the output, and protect continuity so production and service do not miss a beat. If your current supplier’s plan is “we can probably match it,” that is not a plan.

Day 2 at MRO Americas and the momentum is strong. We’ve been busy, we’ve had some great conversations, and we’re excited...
04/22/2026

Day 2 at MRO Americas and the momentum is strong. We’ve been busy, we’ve had some great conversations, and we’re excited for more today. If you’re at the show, stop by Booth 5512 to connect with the Cablecraft and Radial Bearing team at MRO Americas, April 21-23 in Orlando at the Orange County Convention Center. We’d love to see you!

MRO Americas is on now, and we’re ready to talk aerospace solutions.Visit Cablecraft and Radial Bearing at Booth 5512 to...
04/21/2026

MRO Americas is on now, and we’re ready to talk aerospace solutions.
Visit Cablecraft and Radial Bearing at Booth 5512 today at MRO Americas, April 21-23 in Orlando. Come see our engineered motion control products up close and connect with our team about control cables, rod ends, spherical bearings, and linkage solutions built for performance, reliability, and safety. Let’s talk about your application.

If your application has zero fault tolerance, your motion control supplier cannot be a variable. Cablecraft builds engin...
04/21/2026

If your application has zero fault tolerance, your motion control supplier cannot be a variable. Cablecraft builds engineered motion control with disciplined quality systems and a mindset that treats reliability as a design requirement. If you are qualifying suppliers, ask how they control variation from prototype through production. That is where quality actually lives.

The cheapest cable is not cheap when it creates line risk. Cablecraft is built for supply chain security through operati...
04/16/2026

The cheapest cable is not cheap when it creates line risk. Cablecraft is built for supply chain security through operational flexibility, engineering support, and repeatable manufacturing. If you have a program where lead time volatility and change control are now selection criteria, bring us in early.

Two cable assemblies can look identical on a print and behave completely differently in the field. The difference is oft...
04/14/2026

Two cable assemblies can look identical on a print and behave completely differently in the field. The difference is often conduit and innermember pairing. Bend radius, efficiency, backlash, contamination resistance, and temperature perform real-world repeatability, specify the system, not just the endpoints.

Address

2110 Summit Street
New Haven, IN
46774

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+12607495105

Website

Alerts

Be the first to know and let us send you an email when Cablecraft Engineered Motion Controls posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cablecraft Engineered Motion Controls:

Shortcuts

Share

Category