HaasCo LLC

04/14/2026

Went fishing out of Clearwater Florida. Everybody did well on the boat. Had to toss back some of the bigger fish since they were out of season.

05/26/2024

Well…somebody drilled a hole for a compression release, missed the mark, meaning the combustion chamber leaked into the head cooling system and leaked out and around the stud (so I suspect by the customers request to fix the head). The head was full of JB Weld to seal up the erroneous hole. Well…i machined out the hole for the stud, picked out and ground out the JB Weld (hard stuff that wrecks the cutting surfaces on an end mill), turned an insert on my lathe to simulate a new hole for the head stud, pressed it in the head, welded it on both sides, machined both sides of the head, welded up the hole in the in the
combustion chamber, surfaced the head tove dure fkatness, sand blasted and polished everything up. Its ready to install and roost some squids.

02/15/2024

Proudly presenting our updated web site, haasco.net.
Check it out and let me know what you think!

via

Engineering Consulting Company specializing in Motorhome, Travel Trailer and Vehicle inspections

12/16/2023

Well…Husky magnesium case. Somehow the rear mount got busted. I chipped away the epoxy and removed the insert and sleeve. Bought some special TIG welding rod, built it up and machined it too original size. Made a sleeve out of a polymer material and pressed it back together. Another case save. Took the machine shavings out to the driveway and lit them with a propane torch. Pretty cool way bright white flame that lit up the property.

12/07/2023

I have six KX500 clutch cover adapters left. I cut off your cover and weld on the adapter. The adapter is welded from the inside. The cover is leak tested. I can also media blast the finished cover. You need to supply a 2006-2014 KX450 cover. $125 plus shipping both ways.

12/01/2023

09/10/2023

Leave us a review on our Website!

Post a review to our profile on Google

08/16/2023

Check out HaasCo.net for latest updates. More to come ...

Engineering Consulting Company

09/17/2021

Dyno Doug continues to excel as a Ford QVM Auditor/Inspector and Consultant for Progressive Insurance.
His engineering prowess and experience make for the perfect Engineering Consultant for all things manufacturing.

02/08/2021

Getting organized for an updated post/images... Stay tuned...