Racers Edge Fiberglass Composites

05/17/2026

Just want to let everyone know that we dont just care about making quality parts, but we also care about building relationships with our customers who have also become close friends.

We had the pleasure of hanging out with our friend Jerry Stuteville out of Tennessee. If you have been around auto cross racing, you have more than likely seen his beautiful 1978 malibu or have seen the smile he always has on his face wherever he goes. This car has been in Jerry's family since it was new. It was purchased ehen it was new by his mother. This car hasn't always looked like it does now but has seen many transformations over the years. It has worked its way up from a stock family car to a pro street set up with a big block and blower to what it is now, which is our favorite. It is a race proven setup with a 600 hp 6.0 LS with a blower.

!!VIDEO IN COMMENTS!!
Jerry took me along for a ride around the track at the at Let me say that this thing will rip! It not only has the power on demand, but it will corner on the fly.

Jerry's car is definitely a piece of art, but what we like best about him is that he keeps his family involved in everything he does. He also has 2 sons who auto cross along beside him and that is something that is very special to us since we have a 7 and 15 year old that are itching to get behind the wheel soon.

Thank you Jerry and we cant wait to see you again soon!

05/10/2026

We had a blast this weekend at the Battle for the Thrones at US 60 dragway!

It was awesome to get out and see so many of our friends who have supported us from the beginning out racing and having a good time.

I just want to thank all of you for your hard work that you put into your racing program. Without you, we wouldn't be here doing what we do.

It was really great to see all of you and we can't wait to do it again soon!

12/16/2025

Updated pricing

*Prices are before shipping cost.
Message for shipping estimate.

Gen 1 S10

Lower Valance $175
Bumper $300
Bumper With Valance $400
Blazer Rear Bumper $325
Dash $400
Tailgate Skin $300
Tailgate With Roll Pan $325
Bolt on Fenders $575 Pair
Lift Off Flat Hood $525
Lift Off 5.5 Cowl Hood $575

Gen 2 S10

Front Bumper With Valance $425
Tailgate Skin $300
Bolt On Fenders $575 pair
Lift Off 5.5 Cowl Hood $575

78-87 Malibu/El Camino

Front Bumper With Valance $425
Rear Bumper $325
Bolt On Fenders $650 Pair
Fender Liners $500
Lift Off 3.5 Cowl Hood $575
Lift Off 5.5 Cowl Hood $575
Lift Off Trunk $ 425
Dash $400
Functional Doors $2200 Pair
Require additional packaging and shipping charges

*** Large items such as hoods must be shipped truck freight or picked up.
Freight shipping has a minimum cost starting around $150. If you order multiple items and your shipment needs to be shipped freight you are only required to pay the minimum and additional parts will ship for no additional cost.
For instance if you buy a hood, front bumper and fenders, you will only pay to ship the hood and other parts ship free.

*** All future transactions using PayPal,
you will be required to send Friends and family. If you choose to send Goods and Services you are required to pay the additional 3% transaction fee.

05/16/2025

Someone made a post in a group looking for a hood and the responses in the comments, blow me away. Almost every person recommended me.
I just want to say thank you to everyone who goes out of their way to recommend me to possible customers, who are searching for products. I couldn't do this without you. I greatly appreciate all of you! Even the ones who don't have my parts but follow my page and share my products with others. All of you are awesome and I wouldn't be here without your help!

10/11/2024

LIABILITY: Racers Edge Fiberglass Composites will not be liable for personal, or property damage caused by the use or misuse of any product that we manufacturer or sell. Racers Edge Fiberglass Composites has no control over the installation and/or use of its products. No warranty is expressed or implied.

DISCLAIMER: By their very nature, competition components are constantly pushed to their limits. While our components are designed to withstand intense racing conditions, it is impossible to control the varying condition in which they are used. It is for this reason that neither the seller nor the manufacturer will be liable for any loss or damage or injury direct or indirect arising from the use of or inability to determine the use of any product. Before using, the user shall determine the suitability of the product for its intended use, and the user shall assume all responsibility in connection there with.

WARNING: Products manufactured by Racers Edge Fiberglass Composites are designed for competition purposes only. Accordingly, use of said products or modification to or construction of a vehicle for the purposes may create dangerous conditions that could cause bodily injury, and the buyer hereby expressly assumes all risks associated with any such modifications.

Send a message to learn more

10/08/2024

Hello friends!
I hope everyone is doing great.

I just want to bring to everyone's attention of the latest scams and urge you to be cautious before sending any money for parts.

As I have said before I don't sell parts in groups, I will not approach you to purchase something and i only take payment using PayPal.

Currently there is a page set up to look like mine.
The difference is that it is missing the letter S at the end of composites
Also if you look at the followers there isn't as many as my page.

I'm real sorry for the confusion on this and I hope to get things cleared up soon.
If you have any questions or want to verify to make sure you have the right place, please give me a call at 270-315- 2699. Please leave a voicemail and I will get with you ASAP
Thank you, I really appreciate your support through the years!

08/03/2024

New product!

We now have doors available for g body malibu and el camino!
These doors are fully functional and work with all existing hardware and door panles.
They are 60lbs less per side than the steel doors.
These will work with stock hinges but you will need to fab something on the inside to secure the hinge to the door.
*doors require further trimming to mount hardware

Price is $1000 each plus shipping.

06/06/2024

New product!

2nd gen s10 lift off tailgate.

These are non functional and must be fastened on. These can also be trimmed to fit a step side bed upon request

Weight is 7 lbs, stepside is 5 lbs

$250 plus shipping

06/06/2024

New product!

2nd gen s10 fenders.

These feature a built in wiper cowl delete to close the gap between the windshield and fender to match the hood we offer that also covers this area This can also be trimmed to stock length upon request.

These are 100% bolt on. Weight is 4 lbs each.
These are currently $500 plus shipping per pair.

06/06/2024

New product!

G body malibu inner fenders.

These are made to work with the fenders we offer or to work with gutted steel fenders.
Original inner fenders will not work with the fenders we offer because they don't have an inside structure to attach to. These bolt to the existing holes on the car and the outer lip will seal against the back side of the fenders by adding a slip on weather strip seal commonly found on most older gm vehicles.
We used a seal from a 97 blazer rear hatch and cut to the desired length.

These are $475 plus shipping for the pair.