S. K. Ghosh Associates LLC - Seismic and Building Code Consulting

10/19/2026

Don't miss tomorrow's webinar on Hand Calculations and Detailing for Reinforced Concrete Shear Wall per ACI 318-25.

Hand calculations for the design of reinforced concrete shear walls per the requirements of ACI 318-25 will be addressed in the webinar. Emphasis will be placed on specific code sections and changes from previous versions of ACI 318. Structural details and job site photographs will be shown and explained how they relate to the numerical design and code sections.

10/09/2026

Don't miss out! Only 1-week left to get 20% off all webinar recordings.

Purchase now and watch later. You'll have a year to watch the video.

It looks like this webpage is currently blocked. This website is using a security service to protect itself from online attacks.

10/07/2026

Join us next week for a great webinar on the IBC Statement of Special Inspections.

The IBC requires that the design professional in charge create a Statement of Special Inspections (SSI) for each project. This seminar will discuss each component of the SSI, including types of inspections, the extent of these inspections, and the frequency at which they should be provided. The discussion will not only include code prescribed inspections but many of the special inspection requirements that are not defined in referenced standards. Several project examples will be used to show how an appropriate project-specific SSI is developed.

10/02/2026

Don't miss out on 20% off our Instant Videos.

For a limited time, you can get 20% off our webinar recordings. You'll have a year to watch the video. So purchase now and watch it later when you have time.

https://shop.skghoshassociates.com/web-seminar-recordings.html

09/23/2026

Next week's webinar on Wind Loads on Nonbuilding Structures will be here before you know it. Come learn from Emily Guglielmo as she shares her expertise on Wednesday September 30th.

This session will focus on wind loads on non-building structures, including equipment, screenwalls, PV, and signs. The session will discuss ASCE 7 wind load provisions for non-building structures and how to correctly apply them through examples. An in-depth exploration for engineering commonly encountered situations that are not directly addressed in the code will follow. Sample topics include:
1. Horizontal and vertical components of wind load for rooftop equipment.
2. Wind load on rooftop equipment on buildings less than 60' and over 60'.
3. Rooftop screenwalls.
4. Signs.
5. Canopies.
6. Tall parapets.
7. Trellises.

09/21/2026

Part 3 of our 3-part 1-hour webinar series on the Design and Detailing of Steel Reinforced Concrete Pile Caps is tomorrow. Have you reserved your spot?

https://shop.skghoshassociates.com/part-3-design-and-detailing-of-steel-reinforced-concrete-pile-caps.html

Part 3 of the series covers design and detailing requirements for pile caps subjected to combined vertical and lateral loads. Also included are design examples illustrating the proper application of the design and detailing requirements.

09/14/2026

Our 3-part, 1-hour webinar series on the Design and Detailing of Steel Reinforced Concrete Pile Caps starts tomorrow. Have you reserved your spot?

https://shop.skghoshassociates.com/part-1-design-and-detailing-of-steel-reinforced-concrete-pile-caps.html

9/15: Part 1 of the series provides an introduction to pile cap design, including loads, behavior, and general detailing requirements.

9/16: Part 2 of the series covers design and detailing requirements for pile caps subjected to vertical loads.

9/22: Part 3 of the series covers design and detailing requirements for pile caps subjected to combined vertical and lateral loads. Also included are design examples illustrating the proper application of the design and detailing requirements.

09/09/2026

Our 3-part webinar series on the Design and Detailing of Steel Reinforced Concrete Pile Caps starts next week. Sign up today!

https://shop.skghoshassociates.com/part-1-design-and-detailing-of-steel-reinforced-concrete-pile-caps.html

9/15/26: Part 1 of the series provides an introduction to pile cap design, including loads, behavior, and general detailing requirements

9/16/26: Part 2 of the series covers design and detailing requirements for pile caps subjected to vertical loads.

9/22/26: Part 3 of the series covers design and detailing requirements for pile caps subjected to combined vertical and lateral loads. Also included are design examples illustrating the proper application of the design and detailing requirements.

09/08/2026

Tomorrow's webinar is almost here. Don't miss out.

Rigid Diaphragm Analysis with Hand Calculations

https://shop.skghoshassociates.com/rigid-diaphragm-analysis-with-hand-calculations.html

Join Bryan Allred as he gives an explanation of the rigid diaphragm method with an example. It will also show how to calculate rigidity and the center of rigidity. This webinar will discuss the infinitely rigid assumption and the use of semi-rigid diaphragms. Are these two actually any different in the “real” world?

09/02/2026

Next week's webinar is almost here. Join Bryan Allred as he discusses Rigid Diaphragm Analysis with Hand Calculations.

https://shop.skghoshassociates.com/rigid-diaphragm-analysis-with-hand-calculations.html

This webinar will give an explanation of the rigid diaphragm method with an example. It will also show how to calculate rigidity and the center of rigidity. This webinar will discuss the infinitely rigid assumption and the use of semi-rigid diaphragms. Are these two actually any different in the “real” world?