Hastings Welding And Fabrication

Hastings Welding And Fabrication Hastings Welding & Fabrication LLC. Fully Insured. AWS Certified in Structural Steel & Pipe Welding

We Enjoyed Our Towns Old Home Day This Past Saturday! It's been such a busy year, I've not had time to add an electric l...
08/24/2026

We Enjoyed Our Towns Old Home Day This Past Saturday!

It's been such a busy year, I've not had time to add an electric low pressure fuel pump to the truck. It runs awesome! but if you shut it off the fuel in the line boils and turns to v***r...quickly. The mechanical fuel pump cannot push v***r, so the only guaranteed options are pop start it like we did at the start (v***r locked) or let it cool down allowing the v***r to condensate back to liquid. It was nice and cooled off after the car show to drive home.

I enjoy the old trucks. I'm thrilled to see my kids grow up with it. It's a treat to talk with people about it and business

Aluminum railing repair on the Pickering Rd Bridge in Rochester NH. Welded around 60 free floating pickets and fabricate...
08/21/2026

Aluminum railing repair on the Pickering Rd Bridge in Rochester NH. Welded around 60 free floating pickets and fabricated 3 new ones to replace the 2 missing ones and 1 broken.

Loader Arm and frame repair on this 80s Massey Ferguson. The left side of the loader had torn clean off causing the righ...
08/15/2026

Loader Arm and frame repair on this 80s Massey Ferguson. The left side of the loader had torn clean off causing the right side to tear and bend. Got it all back together like it never happened. Also fixed the broken brush hog while I was there. Happy customer 🤘

Wrapped up the welding on the Henry Bridge in Goffstown, NH today. 1.5 months averaging 85-95° temps every dayThis proje...
08/15/2026

Wrapped up the welding on the Henry Bridge in Goffstown, NH today. 1.5 months averaging 85-95° temps every day

This project involved removing the old, failed galvanized bridge decking and side panels, cleaning and preparing the existing steel beams, applying cold galvanizing for corrosion protection, and installing and squaring the new galvanized decking and side panels.

One of the biggest milestones on this job was the welding. The installation alone required approximately 1,275 feet of new fillet welds. Before any of that could begin, we also had to plasma-gouge and remove approximately 1,275 feet of the original welds during demolition to free the existing decking.

A lot of cutting, fitting, and welding went into bringing this bridge back together. Looking forward to seeing the finished product once the concrete, backfill, and asphalt are complete.

Customer provided 2 sections of I- beams to have cut down, drilled and 12 stiffener plates welded in
08/08/2026

Customer provided 2 sections of I- beams to have cut down, drilled and 12 stiffener plates welded in

Aluminum repair on the horse trailer Ramp hinges. Added bearing buddies on the hubs as well to make service quick and ea...
08/08/2026

Aluminum repair on the horse trailer Ramp hinges. Added bearing buddies on the hubs as well to make service quick and easy

Stainless Tig welding repair at Concord's Dairy Queen yesterday morning.
07/28/2026

Stainless Tig welding repair at Concord's Dairy Queen yesterday morning.

Milled these brackets out to clamp onto these suspension canisters
07/20/2026

Milled these brackets out to clamp onto these suspension canisters

Address

474 4th Range Road
Pembroke, NH
03275

Telephone

+16032392485

Website

Alerts

Be the first to know and let us send you an email when Hastings Welding And Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hastings Welding And Fabrication:

Shortcuts

Share

Category